Showing results: 1036 - 1050 of 6936 items found.
-
DCI 200 -
Robert Bosch GmbH
Thanks to its measuring system, the Bosch DCI 200 diesel test bench is future-proof and can code and test passenger car and commercial vehicle CR injectors with the latest injection technologies such as Needle Closing Control (NCC) and Valve Closing Control (VCC) for EURO 5 and EURO 6 injectors.
-
PCIe-Harpoon -
Dynamic Engineering
PCIe-Harpoon is a multi-functional board with capabilites for isolated measurement and control. The initial use of the PCIe-Harpoon is to simulate - act as if the PCIe-Harpoon was another piece of equipment. The simulation provides a means to test the rest of the equipment without requiring the real [expensive] asset. In addition the PCIe-Harpoon can provide status and direct software control of the system.
-
PCI - HARPOON -
Dynamic Engineering
PCI-Harpoon is a multi-functional board with capabilites for isolated measurement and control. The initial use of the PCI-Harpoon is to simulate - act as if the PCI-Harpoon was another piece of equipment. The simulation provides a means to test the rest of the equipment without requiring the real [expensive] asset. In addition the PCI-Harpoon can provide status and direct software control of the system.
-
27920 -
Parallax Inc.
Based on a unique capacitive cell, the HS1101 Humidity Sensor is a relative humidity designed for high volume, cost sensitive applications such as office automation, automotive cabin air control, home appliances, and industrial process control systems. They are also useful in all applications where humidity compensation is needed.
-
6684A -
Keysight Technologies
Keysight high performance DC power supplies offer speed and accuracy for test optimization. The single output, 5000W, GPIB 6680A-6684A provide low output ripple and noise; selectable compensation for inductive loads; analog control of output voltage and current; and fan-speed control to minimize acoustic noise.
-
CPCI-48OUT -
ALPHI Technology Corporation
The output board consists of FPGA controllers for DC output control. An FPGA provides the timing and control. Each output has its own optical isolation, and supports an open collector output. An PCI controller provides the interface to thehost computer. All I/O is accessible from the front panel.
-
CPCI-48 OUT -
ALPHI Technology Corporation
The output board consists of FPGA controllers for DC output control. An FPGA provides the timing and control. Each output has its own optical isolation, and supports an open collector output. An PCI controller provides the interface to thehost computer. All I/O is accessible from the front panel.
-
SFY027 -
Shanghai Launch Electric Co., Ltd.
Microcomputer automatic control, all keyboard operation, convenient man-machine conversation function, detector signal switch through the time of preparation proceduresHighly stable circuit control system to ensure a high reliability of the instrumentPerfect overheat protection for column box and detectorStorage in ten seconds the file of parameters analysisStopwatch
-
Amplicon USA
The Senses panel PC range is our own brand of entry-level to high performance panel PCs. These systems provide affordable and reliable quality flat panel PCs and are used in Human Machine Interface (HMI), SCADA, process control, factory automation, building control and home automation applications.
-
MS 2006 -
Meltronics Systemtech
- Spartan FPGA based Design- Customized design for delaying & switching video inputs to RF section- Interface with EW Signal Processor Unit- Two channel video inputs and control- Video Signal Delay from 1ns to 1ms- Over duty Indications- Inhibit Control- Discrete Interface
-
CS2-TM-Pulse -
Chuan Sheng Electronics Co., Ltd.
The CS2-TM(Pulse Input) is innovation totalizer.Adtek builds in high technology with wide input range from 0.01Hz~ 140.00KHz with auto-range function at same unit. There are three setting modes for K factor, 1/K factor and flow speed to match the difference output description of flow-meters.The Totalizer provides high accuracy measurement, display, control and communication (Modbus RTU mode) of Pulse from Flowmeter or encoder, proximity switch, photo switch for length control.There are two display screen and 3 external control input (DI) in standard and the optional 4 Relay, 1 Analogue, 1 Pulse and RS485 port available. They are also support fantastic control function as like as N, R, C mode for totalizer and batch control.
-
DZ-100 -
HORIBA, Ltd.
The DZ-100 inherits the same CRITERION™ technology—a differential pressure detection system for laminar viscous flow ranges—used on HORIBA STEC’s MFC, the D500. This innovative technology controls the mass flow of various gases with high precision. As with the D500, the user-configurable DZ-100 supports multi-range and multi-gas applications. The compact design of the MFC reduces the internal volume of the internal gas flow path, and the optimized control algorithm improves response characteristics. It uses a compact CPU with high processing capacity, and the piezo drive circuit and control CPU are installed in the MFC module while the power supply components are housed in a separate small control box. Up to four MFC modules can be controlled by connecting them with the dedicated miniature connectors.
-
Ajinkya Electronic Systems
Profile Controller is Process Controller for controlling process parameter against time. User can define the profile he wants with the help of extensive instruction set. Unit supports instructions like jump, loop, loop with count apart from ramp and soak control. Auxiliary relays are provided which can be used to operate external controls like valve or hooter etc. Relay On and Off instructions are supported. Unit is available with control algorithm as On / Off, Proportional, PI or PID to choose from depending on process requirement.
-
Watlow Electric Manufacturing Company
Temperature and process controllers include one or more sensor inputs with open-loop break detection and multiple outputs for control and alarms. Various configurations offer auxiliary analog inputs, automatic tuning, TRU-TUNE®+ adaptive control, and ramp and soak profiling. Output options include analog process, switched DC and mechanical, solid state and no-arc hybrid relays. Other features include countdown timer, user-customizable menu, burst fire output control, failed heater/load detection and NEMA 4X (IP65, IP66).
-
CS1000 Series -
Advanced Energy
The CS1000 fanless power supplies deliver up to 1000 W with natural convection cooling. Available with 24-volt or 48-volt single outputs, the CS1000 operates off a universal AC input voltage of 85 to 264 VAC. The series provides intelligent analog and digital control and monitoring with PMBus™ (an open-standard digital power management capability). Control and monitoring features include AC fail, global remote/off, output voltage/current control as well a large suite of protection features, such as over-voltage, over-current, short-circuit, and over-temperature.