Showing results: 211 - 225 of 1289 items found.
-
Pulse Instruments
Imaging devices, such as CCDs, IR FPAs, and CMOS image sensors, require DC bias with very low electrical noise to prevent contamination of the image. Image quality can also be enhanced by carefully tuning each bias voltage to extract the maximum signal/noise ratio out of an array. Pulse Instruments has decades of experience providing DC bias supplies with the flexibility required tocharacterize and test a variety of devices while maintaining the noise immunity required for satellite and astronomy applications.
-
Shanghai Fibretool Technology Co.,Ltd.
● 2.7 inch handheld DM27 monitor;Brightness and contrast adjustment● Quick navigation, get image within 3-5 seconds; Two-way focus control● 95% Image centralization, Clear image, no interface, no flash● 27 types of adapters tips available to inspect different connectors and angle-mounted connectors with limited access space● Precise resolution (<1 um), no shadow or vignetting in screen● Reliable output signal, no default under repeated operation● Various monitors can be chosen with specific display capability
-
EPS-02EMF System -
Noise Laboratory Co.,Ltd.
The system detects position of the magnetic field sensor on the basis of the image on the camera first of all and then, recognizes strength of the signal that is measured by the sensor upon frequency analysis of the signal almost simultaneously. Finally, visualization of the strength dispersion in composition with the real image of the measured object can be realized on screen of PC.
-
Campbell Scientific, Inc.
High-resolution digital cameras with video capabilities are used to take still images or videos based on an internal timer, motion detection, or a trigger from another device. The images or videos are then stored on an SD card, saved in a datalogger's memory, sent to a PC via email, or transmitted to an FTP server.
-
Extron Electronics
Signal conversion for matching display resolution or optimizing image quality, or to output NTSC or PAL.
-
DS703 FC -
Fluke Corporation
7” capacitive touch screen for accurate diagnostics in difficult to reach spaces. 720p video recording inspection camera. Adjustable LED lighting and digital zoom for quality images. Up is Up™ technology rotates the display screen to allow for appropriate image display, regardless of the orientation of the probe.
-
Scarlet -
Nerian Vision Technologies
Scarlet combines 3D stereo camera and image processing in one device. Whether for static environments, or hard and critical real-time applications in dynamic environments, our Scarlet 3D depth camera provides you with exactly the image and depth data you need for your machine vision application.
-
Neon-CLB -
BitFlow, Inc.
Simplify your industrial, medical, or semiconductor imaging application with BitFlow's Neon-CLB, the easiest to use and most reliable Base/PoCL Camera Link frame grabber available anywhere. The Neon-CLB captures images at up to the camera's highest frame/data rate, with precision image acquisition suitable for the most demanding applications.
-
Lambert Instruments BV
The HiCAM Fluo is a high-speed camera for fluorescence imaging applications. It records high resolution images at a frame rate of up to 2000 fps in the most challenging low-light conditions by using a cooled image intensifier. Packed into a compact aluminum enclosure, it is easy to attach the HiCAM Fluo to any fluorescence microscope.
-
E-CAM55_CUMI0521_MOD -
e-con Systems Inc.
e-CAM55_CUMI0521_MOD is a small form factor, 5 MP fixed focus camera module based on AR0521 CMOS image sensor from ON Semiconductor® has a dedicated, high-performance Image Signal Processor chip (ISP) on-board that performs all the Auto functions (Auto White Balance, Auto Exposure control) in addition to complete image signal processing pipeline that provides best-in-class images and video. This low light camera module can stream uncompressed VGA (640 x 480) at 75 fps, HD (1280 x 720) at 100 fps, 1280 x 960 at 75 fps, FHD (1920 x 1080) at 65 fps, 2560 x 1440 at 38fps, 2592 x 1944 at 28 fps.
-
EasyNav -
HORIBA, Ltd.
The new EasyNavTM package makes it easy to navigate through your image and acquire sharp Raman images in the blink of an eye, thanks to three new revolutionary applications: NavMapTM, NavSharpTM and ViewSharpTM. With the groundbreaking EasyNavTM package, it is fast and easy to navigate in-focus, in real-time, to identify the region of interest and obtain sharp, clear Raman chemical images. EasyNavTM has been tested and validated on a large variety of samples. HORIBA NavMapTM+ NavSharpTM+ ViewSharpTM apps can be used together or separately to deliver a powerful user experience for all Raman users.
-
Toggel -
Lambert Instruments BV
Lambert Instruments today announced the introduction of its next-generation fluorescence lifetime imaging camera: Toggel. This new camera makes fluorescence lifetime imaging microscopy (FLIM) and fluorescence resonance energy transfer (FRET) faster and easier with its excellent light sensitivity, sharp images and fast image acquisition. With Toggel, Lambert Instruments aims to minimize measurement duration, automate image acquisition and simplify data analysis. These factors are of great importance to many of its customers in cell biology, cancer research and high-throughput screening.
-
Lt-C/M5470 -
Teledyne Lumenera
With many imaging applications the overall megapixel value of a camera’s sensor is not the most important specification. With a 5472 x 3084 resolution, the Lt-C/M5470 camera is ideal for applications that benefit from a large pixel width. For example, a large pixel width allows unmanned aerial vehicles to capture a wider landscape with each image or an intelligent traffic system to image a greater number of lanes on a roadway. And, with a high dynamic range to go along with its wide field of view, the images from the Lt-C/M5470 clearly distinguish areas of interest.
-
Applied Image, Inc.
Our customers in industries that require camera or scanner image evaluation certainly know the challenges that come from finding the perfect target for a specific system and measurement. Thankfully, we at APPLIED IMAGE know these challenges just as well. The ability to freely customize a target has proved important for our customers to get the image evaluation tools they need. Our sales engineers are experts in different types of targets and specifications that will give you the best results for your project, and will guide you through the process from start to finish.
-
MilSight LIRC -
Teledyne FLIR
The MilSight LIRC is a compact, rugged thermal imager designed for high sightline stability and excellent imaging performance in tracked or wheeled armored vehicle applications. It uses a 640x480 LWIR QWIP detector coupled with highly advance STACE™ image processing for outstanding image quality in the most demanding situations.