Showing results: 1606 - 1620 of 2707 items found.
-
Renesas Electronics Corp.
IPM drive photocouplers (optocouplers) are optically coupled isolators containing a GaAlAs LED on the input side and a photo diode and signal processing circuit on the output side in a single chip. This coupler is a high common mode transient immunity (CMR), high CTR type whose pulse width changes according to the operating temperature, making it ideal for driving IPMs (intelligent power modules).
-
SparkFun Electronics
The LilyPad Simple Power is a simple e-textile board with a 500mA charge rate that lets you connect and charge a lipo battery and switch it on or off, that's it! We provide you with a JST connector and a slide switch, you supply the battery and sewing skills! With this LilyPad Simple Power, you should find no trouble in added a bit of power to your next wearable circuit.
-
ICT-4 -
Physitemp Instruments
ICT-4 Micro-Surface Microprobe - For use on integrated circuits and other micro specimens. 0.013'' diameter .5'' straight stainless steel shaft; slightly protruding sensor bead to facilitate temperature probing. 5'' tubular handle fits micro-manipulators. Maximum intermittent temperature 200°C, continuouse use 100°C, Time constant 0.025 Seconds. 5 foot lead. Not isolated.
-
Amitron Corp.
ultilayer circuit boards were essential in the advancement of modern computing. The multilayer PCB basic construction and fabrication are similar to micro chip fabrication on a macro size. The range of material combinations is extensive from basic epoxy glass to exotic ceramic fills. Multilayer can be built on ceramic, copper, and aluminum. Blind and buried vias are commonly produced, along with pad on via technology.
-
Scientific Mes-Technik Private Ltd
Scientific offers wide range of analog , analog -digital , digital oscilloscopes up to 350 MHz bandwidth. At entry level , 30 MHz , SM410 is very popular model with unsurpassed price- performance ratio. Modern circuits often use high speed VLSI techniques , high speed micro controllers etc, HMO3524 is equipped with facilities and capabilities to handle these signals.
-
377C10 -
PCB Piezotronics, Inc.
Performance:Nominal Microphone Diameter:1/4"CharacteristicPressure Open Circuit Sensitivity1.0 mV/Pa1.0 mV/PaFrequency Range (2 dB)4 to 70000 Hz4 to 70000 Hz Lower Limiting Frequency (-3 dB)0.25 to 3.0 Hz0.25 to 3.0 Hz Resonant Frequency (90 Phase Shift)65000 Hz65000 HzHumidity Coefficient of Sensitivity (0 to 100%, non-condensing)0.0012 dB/%RH0.0012 dB/%
-
XT9812 -
Xitron Technologies Inc.
Vitrek’s XiTRON XT9812 Programmable DC Electronic Load is designed for LED Driver or DC Power Supply Applications. There is a special circuit that has been designed primarily for the LED driver. The design utilizes high performance semiconductors with high speed and high accuracy, and resolutions of 0.1 mV and 0.01 mA (the basic accuracy is 0.03%, the basic current rise speed is 2.5 A/us).
-
AMPTEC RESEARCH
Digital Multimeter is used to measure stray voltage and current in harsh weather environments. Additionally, all internal circuits are conformal coated, it contains an internal all-metal Faraday cage, and has a built-in self-test to ensure ultimate integrity of measurement. The 601ES DMM is NASA Range Safety Board and USAF Space Wing Board approved, proving its intelligent design is ultra-safe.
-
TINA-TI -
Texas Instruments
TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages and waveforms. TINA''s schematic capture is truly intuitive-a real "quickstart."
-
NEO TELE-TRONIX PVT. LTD
This modern Test Set For Instrument Transformer is used for measuring relative errors of Instrument Voltage and Current Transformers. This is developed for reading out the unbalance of any bridge circuit. It also calculates the burden associated to the test sample. In addition to this, it further converts it to ratio and phase error values for presenting them on a LCD screen. With high-tech microprocessor controller, it ensures to provide quick and correct measurements.
-
Vertical Space -
SV Probe, Inc.
With our TrioTM vertical and LogicTouchTM fine pitch vertical technologies an interconnect, otherwise known as a space transformer (ST), is used between the printed circuit board and the probe head, transferring the test signal. SV TCL provides a variety of space transformers, each with its own specific benefits and applications. SV TCL offers a number of space transformer options including:
-
Yelo Ltd.
A hipot test is conducted by ensuring no current flows from one point to another on a circuit. A hipot test will take two conductors that should be isolated from one another and passes a high voltage between the two points. The current which flows between these points is then measured. If too much current flows, this would indicate that the points are not well isolated and the test will fail.
-
Advanced Energy
Advanced Energy is a trusted high voltage power supply provider with over 40+ years of experience. Our extensive line of Trek high voltage amplifiers offer numerous voltage and current ranges to accommodate your demanding applications. Protect against output short circuits and over-voltages. For protective shutdown, utilize automatic crossover compliance limits or current trip features.
-
Series DR3P -
Teledyne Defense Electronics Relays & Coax Switch
Series DR3P solid-state relays provide three-phase output, offering both AC and DC control with a zero-cross turn-ON thyristor output. The DR3P provides an integrated heat sink, output transient suppression (MOV and snubber circuit) and LEDs that serve as status indicators for diagnostics. The relays are designed for DIN-rail or panel mounting.Available options include:DR3P48A50 22A, 24-520Vrms Load; 90-240Vac/Vdc
-
MFG-3005 -
MCH Instruments Co.,Ltd.
*Frequency range: 0.1Hz~5MHz*Output waveforms: Sine ,triangle, square, positive and negative pulse, positive and negative ramp*Output impedance: 50Ω±10%*Output Amplitude: Not less than 20Vp-p(open circuit)*DC voltage: 0~±10V continuously adjustable*Symmetry range: 90:10—10:90*Rising edge of square: Less than 100ns