Showing results: 1711 - 1725 of 5162 items found.
-
U1242B -
Keysight Technologies
10K counts digital multimeter with switch/relay counter, harmonic ratio and dual/differential temperature functions for installation and maintenance troubleshooting.
-
ThermoWorks
ThermoWorks temperature and humidity loggers are perfect for food processing, transportation, and restaurant fridge and freezer storage, including cold chain management, cook chill, and critical control points (HACCP). They are also used in labs and for pharmaceutical applications like VFC. Wirelessly pair multiple network-connected units to a single base station through WiFi, Bluetooth, or RF and store your temperature or humidity readings in the cloud. Our USB probes and USB data transfer loggers are also popular and come with integrable software. Specialized loggers are also made for harsh environments, including extreme low and high temperatures.
-
TA Instruments
Thermal conductivity defines a material’s ability to transfer heat. A precise and accurate measurement is critical for any process or material experiencing large or fast temperature gradients, or for which the tolerance for temperature changes is exacting. Accurate values are essential for modeling and managing heat, whether the component of interest is called on to insulate, conduct, or simply withstand temperature changes. Information about these properties are routinely used in heat transfer models of all complexities. Thermophysical property measurements also reflect important information about material composition, purity and structure, as well as secondary performance characteristics such as tolerance to thermal shock.
-
DWC-1 -
Lisun Electronics Inc.
This low-temperature impact device is compliance with standard requirement of IEC60245, IEC60227, IEC60540, GB5013-2008, GB5023-2008 and GBT2951-2008. It’s used to test all kinds of PVC sheathed cable, wire, soft wire and no sheath of parallel soft PVC insulated impact resistance at low temperature. Specification: • Working temperature: -15℃±1℃ • Impact height: 10~200mm adjustable • Length of specimen: 5D~150D • Material: 304 stainless steel • Completion time once: 3~5s • Completion number of units for once: ≥2pcs • Weight: 100/200/300/400/500/600/750/1000/1250/1500g • Low temperature box to match additionally
-
CW‑800 -
ELTRA GmbH
Determination of released carbon dioxide and water is a special requirement for quality control in the cement and lime industry. ELTRA’s CW-800 analyzer is designed for the precise, simultaneous determination of carbon dioxide and water in lime, gypsum and cement from trace level up to 100 % (depending on sample weight). Other sample materials include ores, soil and minerals. The CW-800 is equipped with a resistance furnace with quartz tube for sample oxidation and can provide temperatures up to 1000 °C. The temperature of the CW-800 can be set up in steps of 1 °C and the temperature is fixed during measurement. As common carrier gas in the CW-800 nitrogen is used.
-
Hanatek Instruments
The Hanatek FST Film Shrink Tester is used to measure the effect of temperature on plastic films. The application of heat causes certain plastic films to rapidly contract; this effect can be used to seal and pack many items from food to consumer goods. The shrink effect is due to internal forces locked into the film during manufacture being released by heating, it is also known as linear thermal shrink or free shrink. The amount of shrinkage is dependent on the film type, thickness and sealing temperature. Testing the percentage shrink of a film ensures that it is suitable for a particular packaging application and establishes the correct temperature for that application.
-
Keystone Compliance
Keystone Compliance offers temperature and temperature humidity testing in chambers ranging from small bench top to large drive-in systems. Our largest chamber was specifically oversized in design. With inside dimensions of 12’ wide x 15’ long x 10’ tall and an 8’ x 9’ door, Keystone Compliance is capable of moving, installing, and testing multiple rack assemblies. Keystone Compliance also operates a large walk-in chamber that is specially equipped with twin 30 hp compressors and is capable of temperature transition rates exceeding 15 degrees Celsius per minute.
-
Rhopoint Instruments
The Hanatek FST Film Shrink Tester is used to measure the effect of temperature on plastic films. The application of heat causes certain plastic films to rapidly contract; this effect can be used to seal and pack many items from food to consumer goods. The shrink effect is due to internal forces locked into the film during manufacture being released by heating, it is also known as linear thermal shrink or free shrink. The amount of shrinkage is dependent on the film type, thickness and sealing temperature. Testing the percentage shrink of a film ensures that it is suitable for a particular packaging application and establishes the correct temperature for that application.
-
Extech 445814 -
Extech Instruments Corporation
This Humidity Alert Hygro-Thermometer has a programmable %RH audible and visual alarm that alerts you when humidity exceeds the set limit. Large LCD simultaneously displays Temperature, Humidity and Dew Point. Product measures Humidity from 10 to 99% and Temperature from 14 to 140°F (-10 to 60°C). The meter has a basic accuracy of ±4%RH and ±1.8°F/1°C. Rear calibration pot for Humidity and Temperature. Featuring maximum/minimum with reset functions that store and recall the highest and lowest readings recorded. Comes complete with built-in stand, wall bracket and AAA battery.
-
Extech RHT510 -
Extech Instruments Corporation
Conveniently check the Humidity and Temperature conditions in residential and professional settings to ensure comfort and safety. The RHT510 is a Hygro-Thermometer Psychrometer that measures Relative Humidity, Temperature, Dew Point, and Wet Bulb. General purpose bead wire Type K probe is included for measuring Temperature up to ~480°F (250°C), while the meter can measure to 2372°F (1300°C) if used with other probes. Min/Max function stores and recalls highest and lowest readings. Additional features include: large LCD display with backlight, Data Hold and Auto power off with disable option.
-
Extech 42515 -
Extech Instruments Corporation
13:1 Wide range IR Thermometer with Type K Input.The 42515 is a Wide Range IR Thermometer with Type K input which measures both non-contact and contact temperature. Wide InfraRed temperature range from -58° to 1472°F (-50 to 800 °C). Stores up to 20 readings. 13:1 distance to target ratio, laser pointer for easy targeting. Type K input for surface temperature measurements from -58 to 2498°F (-50 to 1370°C). Complete with 9 Volt battery, Type K bead wire probe and case.
-
Extech TM300 -
Extech Instruments Corporation
The TM300 is a compact meter for differential temperature measurements. Large backlit LCD displays T1, T2, T1-T2 differential, plus Min, Max, and Avg. Wide temperature range with 0.1°/1° resolution. Readout in °F, °C, or K (Kelvin). Data Hold function freezes reading on display. Max/Min/Avg readings with relative time stamp. Offset key used for zero function to make relative measurements. Auto Power off with disable feature. Complete with two general purpose Type K bead wire temperature probes, three AAA batteries, and pouch case.
-
NOVOTEST TP-1M -
NovoTest
Portable Coating Thickness Gauge NOVOTEST TP-1M – device for operative non-destructive measuring of coating thickness in compliance with ISO 2808 with high measurement accuracy.Coating thickness gauge is designed to test:thickness of various thick protective coatings on various metals and alloys;thickness of paint and other dielectrics – radioabsorbing, mastic, teflon, plastic, electroplating coatings on steel;thickness of electroplating and paint coatings on non-ferromagnetic alloys and non-ferrous metals;thickness of bitumen and other thick coatings on various metals and alloys;as well as relative humidity, air temperature, surface temperature, dew point temperature and difference between surface and dew point temperatures, estimate the depth of grooves and the surface roughnessElectronic thickness gauge – device which widely used in shipbuilding and automotive industries for measuring of the thickness of paint, in order to test the quality of products, also it used for determining technical condition of the tested objects.
-
Model 2100 -
Electrolab, Inc.
The Model 2100 DLS with High Level Shut-In delivers consistently accurate measurements of different types of fluids in both hazardous and non-hazardous environments. Multiple fluid densities and temperatures do not affect measurement. The DLS with High Level Shut-In effectively measures the level and temperature of a variety of liquids, including Crude oil, Diesel, Kerosene, Condensate, Gasoline, Water, and Others.
-
SLA64 (Preliminary) -
Dexter Research Center, Inc.
A 1 x 64 element silicon-based thermopile array. Each active area is 0.45mm x 2.0mm with a time constant of 42ms and a low Temperature Coefficient of Responsivity of -0.06%/C. It is packaged in a 68-pin QIP. Includes internal 30k 5% NTC chip thermistor provides ambient package temperature measurement. See Thermistor Options p/n: MT04.
