Showing results: 3436 - 3450 of 5162 items found.
-
Lt-C/M6480 -
Teledyne Lumenera
For challenging imaging applications where the maximum number of pixels are needed, the Lt-C/M6480 offers a large 31-megapixel APS-C sensor in a compact, rugged, and reliable camera. Designed for use in hot or cold environments and supporting operating temperatures of 0 to 50 degrees Celsius, the Lt-C/M6480 is suited for industrial applications with its secure USB3 interface with a locking connector. In outdoor applications such as traffic monitoring, this camera offers reliable color and detail in various weather conditions.
-
BCO, Inc.
The ruggedized enclosure provides an environmentally conditioned environment for rack mounted PXI equipment. Supports rack mounted PXI chassis. Hermetically Sealed case isolates PXI equipment from hostile environments as specified for military applications. The sealed enclosure allows the system designer to select any of the full line of PXI products without the need to Conformal Coat the cards/components. With the conditioned internal environment, there is no need to select PXI products which operate at an extended temperature range.
-
General Tools & Instruments
All psychrometers derive an environment's wet-bulb and dew point temperatures from a precise measurement of relative humidity. The original psychrometer had two thermometers mounted together with a handle attached on a chain. One thermometer was ordinary. The other had a cloth wick over its bulb and was called a wet-bulb. New, digital versionslike General's EP870X family improve on this basic design, offer HVAC technicians a better tool for recharging the refrigerant of a residential or commercial A/C system.
-
ADP400 Series -
Xylem Analytics UK ltd.
The ADP400 Series from Bellingham + Stanley are single wavelength polarimeters suitable for sugar, food, chemical and pharmaceutical industries. These polarimeters are available with or without XPC - Xylem's patented internal Peltier temperature control system. Both models use standard polarimeter tubes with a maximum length of 200mm. For fast performance in the Peltier controlled version, stainless steel tubes should be used. Low volume samples are also catered for with the addition of stainless steel, luer taper tubes.
-
GAO Tek Inc.
GAOTek offers a wide range of superior infrared thermometers for sale in the United States, Canada and globally. These devices are used in many different industries for identifying heat waves in an object. This information is very critical as in some cases this may prevent any injuries by indicating whether object is safe to touch or not. These devices can also be used to measure the temperature of the patients in case of dreadful diseases like Ebola. Moreover, it is also used in emergency purposes like fire break out.
-
Keystone Compliance
Ingress protection testing tests the level of protection an enclosure provides against intrusions. One such set of ingress protection tests involves exposing the equipment under test (EUT), to high-pressure and high-temperature water jets. These tests are numbered IPX9. The first digit, represented by the “X”, ranges from 0 to 6 and specifies the protection from solid particles. The second digit, in the case of the high-pressure and high temperature water jets ingress protection test, would always be a 9.
-
RS-40K -
Taylor Dynamometer, Inc.
RS-40K towing dynamometer is designedfor testing today’s DOT Vehicles (Classes 5 and 6) which includetrucks and buses. The RS-40K is built with a heavy-duty steel frame,industrial axle and rides on an air ride suspension. The RS-40K isdesigned to maintain 40,000 Newtons of constant drawbar force andthe ability to simulate an uphill slope of 25%. The dyno uses eddycurrent absorbers with special high temperature coils. The poweris provided by an industrial generator. Testing is unlimited at lowspeeds.
-
Rotronic Measurement Solutions
Room air monitoring is usually limited to humidity and temperature. Especially in times of a pandemic, measuring and monitoring CO2 is also very important. Correct ventilation in crowded rooms, will significantly reduce the risk of infections including the coronavirus. But when is the best time to ventilate? The carbon dioxide level (“parts per million” ppm) is the key indicator! Find out in the following video why monitoring of CO2 is generally important for our well-being and to judge the room air quality.
-
Rotronic Measurement Solutions
Water activity – a measure for the energy status of the water in a system’ specifies the relationship between the water vapour pressure of a product and the saturation pressure of pure water at the same temperature. It is stated in ‘aw’ in the range 0…1 aw and is an important indicator for product quality in the industrial production of, for example, plastics. The determination of water activity is also very important in the food, tobacco, pharmaceutical and cosmetics industries. Water activity should not be confused with the water content – the ‘chemically bound’ water – of a product.
-
Streamline P937XA -
Keysight Technologies
The Keysight compact VNA offers the good performance on key specifications such as dynamic range, measurement speed, trace noise and temperature stability. It utilizes the same measurement science with the trusted Keysight VNAs, you can have consistent measurement results. Measurement speed: 24 msec (201 points, full 2-port cal, 100 kHz IFBW). Dynamic range: >; 114 dB at 9 GHz > 110 dB at 20 GHz (10 Hz IFBW).
-
Environment Associates Inc.
Our environmental testing facilities simulate altitude testing from -400 ft. (-121 meters) to outer space at 100,000 ft. (30,480 meters) or up to 10-6 Torr (1.3e-7 kPa) with temperature applied as low as -300°F (180C). We can reach these heights within 5 minutes or less. We are capable to handle products measuring up to 4ft X 4ft X 8ft to many standards, including MIL-STD-810 and RTCA DO-160.
-
Crystal instruments
Designed and manufactured by Crystal Instruments, the Spider-101i controller is a key element of the Sentek Dynamics THV Series AGREE (Department of Defense Advisor Group on Reliability of Electronic Equipment) chambers. These chambers provide combined temperature, humidity, and vibration testing in addition to environmental and reliability testing for a wide variety of aerospace, automotive, medical, commercial, and independent test lab applications. Temperature, humidity, and vibration are controlled with high accuracy and are synchronized to simulate the actual physical environment products experience in the field.
-
FLIR EM54 -
Teledyne FLIR
The FLIR EM54 is ideal for inspecting and troubleshooting HVAC/R ducting systems within residential, commercial, and industrial facilities. This meter can help you verify that duct inlets and outlets have the specified volumetric flow – a prerequisite to an efficient functional system. Featuring humidity, wet bulb, and dew point functions, the EM54 can measure deviations from proper relative humidity levels. Plus, the included Type-K contact temperature probe is useful to check electric motors and thermal equipment components for proper operating temperatures.
-
GTD-81 -
Kingrun Instrument Co., Ltd.
GTD-81 Insulation Oil Dissipation Factor and Resistivity Measuring System DTL, is designed and manufactured based on international standards. It is used for measuring dielectric dissipation factor and DC resistivity of insulating oil and other insulating liquids. The instrument is characterized by integrated structure, and integrates test cell, temperature controller, temperature sensor, dielectric loss test bridge, AC test power, standard capacitor, high resistance meter, DC high voltage source and other major components.
-
Center Technology Corp.
CO2, Humidity And Temperature Sensors, Dual Wavelength NDIR CO2 Sensor (Non-Dispersive Infrared) For Superior Stability, User Operated CO2 Calibration, Data Hold & Max/Min/STEL/TWA Function
