Showing results: 361 - 375 of 747 items found.
-
EverythingPCB
ATE, ICT, semiautomatic & manual electronic test fixtures, PCB test fixtures, cable test fixture, wiring harness test fixtures, dedicated test fixtures, functional test fixtures, electronic test fixture programming. PADS Schematic capture, circuit board layout, PCB design prototype, solder paste stencils, X-Y coordinate data, B.O.M. maintenance, and manufacturing documentation, Gerber data.
-
ADTS-3300JS -
TestVonics, Inc.
TestVonics™ ADTS-3300JS Test Set is a portable, high precision, dual channel air data pressure management system. This tester is designed to calibrate, test and troubleshoot air data instrumentation and aircraft pitot-static systems. The test set has been designed with functional and reliability features highly suited to withstand the harsh environmental and demanding conditions of the flight line environment, especially for military end users. The test set is designed for testing a wide range of commercial and military aircraft, both rotary and fixed wing. The ADTS-3300JS accuracy complies with standards for RVSM and is designed to replace the TTU-205 test set.
-
Spinnaker Contract Manufacturing, Inc.
As standard practice, all of our SMT assemblies are washed and tested through our Automated Optical Inspection and pass through our stringent internal QA/QC policies. In Cables and Wire Harnesses, pretests, such as pull tests and crimp type tests, are performed on all builds before being tested for continuity, hi-pot, shorts and mis-wires, to name a few. Our electromechanical assemblies are capable of receiving full functional testing through custom test fixtures and RF test. Some RF tests include Gain/Loss, Frequency Response, VSWR (Voltage Standing Wave Ratio), Inter-Modulation Distortion and Output Power.
-
Handheld -
Schleich Gmbh
The safety testers of the Handheld class are used to measure PE/ Ground resistances, insulation resistances and to perform a simple functional test. The small and sturdy universal testers are intended for standard-compliant safety tests in workshops and production as well as for mobile operation during repair, installation, service and more.
-
5000 Series In-line Handler -
Circuit Check, Inc.
The Circuit Check 5000 Series In-line Handler is an integrated inline solution that combines automation, fixturing and measurement hardware in addition to other in-line PCBA probe based test stations, while adding a standardized quick change fixture interface. The 5000 series in-line is a unified solution that is software and hardware agnostic, enabling adaptability to a variety of off-the-shelf lower cost ICT, flash and functional test software and hardware.
-
Squish -
froglogic GmbH
Testing the user interface of today's applications is a very complex and error-prone task. Automating this task is challenging, but approached correctly very rewarding. Squish is the leading cross-platform/cross-technology GUI test automation tool for functional GUI regression tests. Many companies in all kinds of industries all over the world use Squish to drastically cut down the time spent on GUI testing software releases while increasing the quality of their applications.
-
palmOTDR-S120 Series -
ShinewayTech
● The cost effective and the fully functional OTDR ● Graphic display of test results PC Software Download ● Quick start: <5 seconds USB Driver Download ● Perfect user interface, handheld & lightweight (1kg) ● Hotkeys: Easy to use, push-and-test ● 1000 test records storage ● Bellcore file format (.sor) ● PC software for batch data processing ● USB data interface, driver-free ● Multiple languages: EN/DE/IT/FR/ES/PT/RU/KR/VN/CN etc. ● 10 hours continuous operation with battery ● Dust-shock proof (2m drop test)
-
ACCAT -
Huntron
The ACCAT is designed to support diagnostic and acceptance test requirements across a wide spectrum of testing parameters. ACCAT provides a suite of core parametric test instruments, advanced GUI based software, Huntron Access Robotic probing and Huntron Analog Signature Analysis (ASA). ACCAT provides stimulus and asurement capabilities necessary for full functional and parametric testing of circuit card assemblies along with robotic guided probes for fault verification and debug. The Huntron ASA test is ideal for pretest or safe to power up procedures protecting the integrity of the test system.
-
T5230 -
Advantest Corp.
T5230 memory test system for NAND/NVM devices adopts a combined array architecture to achieve best-in-class cost-of-test performance for wafer test, including wafer-level burn-in (WLBI) and built-in self-test (BIST). The system can perform on-wafer test of 1,024 memory devices per test head in parallel, delivering high productivity and enabling floor space savings of up to 86%. Multiple test cells are connected per system controller in the T5230, allowing independent wafer test of each test cell. The test cells can be stored in a general multi-wafer prober while minimizing the test cell floor space, and the tester can be docked with probers in both linear and multi-stack configurations. For functional tests at a maximum test rate of 125MHz/250Mbps, the T5230 assures high timing accuracy, repeatability, and failure detection capability.
-
Promptlink Communications, Inc.
Promptlink’s Set-Top Box Test Platform (STBTP) is a complete functional testing solution designed for the highest volume testing requirements. With only the highest-quality, highest-speed components, STBTP is the ultimate tool for accurate, high-demand testing of set top boxes. With support for satellite, DAC-based and DVB-based set-tops, STBTP is the solution that never leaves you unsatisfied.
-
SP-3303 -
Shanghai Powoo Industry Develop Group Limited
Three-phase portable energy meter testing equipment is a kind of dektop portable energy meter which is equipped with three-phase high-stability program-controlled power source and three-phase multi-function standard meter developed and manufactured by the Company; the device can be operated with keyboard to achieve simple functional tests, control and management may be realized through personal computer.
-
VerOCode -
Verocel, Inc.
VerOCode can use the same requirements-based tests that were used in functional testing to automate the capture and analysis of structural coverage testing without instrumenting the code under test. This is part of the process used at Verocel. It then records and displays the instructions executed in a program under test, and for conditional instructions, records and displays the state of the condition code at each execution of the instruction. Structural coverage is obtained at the machine code level using the integrated image, with results reported through an annotated program listing containing the source and machine code level expansion
-
Intellitech Corp.
The PT100Pro combines ARM Functional Test, Analog Test and Boundary Scan in one platform for testing up to 32 PCBs at a time. The PT100 Pro solves the test challenges and cost requirements of testing small, high-volume PCBs used in the home, mobile, entertainment, automotive and embedded markets. PCBs in these markets are cost sensitive yet require high volume, high fault coverage on leading edge technologies such as WiFi, DDR Memory, USB, Bluetooth, Nand Flash, MPEG decoders, Power Management Units, and MMC/Smart Cards interfaces.
-
Circuit Check, Inc.
Circuit Check’s in-line board handler fixturing exceed the high performance requirements associated with high-volume production. Circuit Check supports in-line fixturing for all the leading ICT handlers including Keysight 5i, Teradyne TSh Multi-Site, IPTE and Pematech. Circuit Check is the go-to partner for in-line functional test fixtures to speed production throughput.
-
40-253-023 -
Pickering Interfaces Ltd.
The 40-253-023 is a programmable resistor module with 1 channel which can be set between 1.5Ω and 3.55kΩ with 1Ω resolution The 40-253 range provides a simple solution for applications requiring up to 10W of power handling per channel. The 40-253 is available in a variety of resistance ranges and resolution capabilities that meet the needs of most functional test systems.