Filter Results By:
Products
Applications
Manufacturers
Level
high or low along a bead it's a measure referenced.
See Also: Liquid Level, Signal Level Meters, Level Transmitters, Depot Level Test
- Applied Instruments, Inc.
product
CATV Return Band Two Carrier Generator
PC-2
The PC-2 is a compact, temperature-stable two RF-carrier source. It is designed to be used for activating and testing the return-band. When used with a signal level meter, the PC-2 assists in measuring insertion loss of cable, amplifiers, splitters, and taps using the stimulus-response method.
-
product
Capacitor for AC Filtering
PECA4 (690V)
Lifasa - International Capacitors, SA
These capacitors are especially suitable for applications where high levels of AC voltage are required. The design of this series has been optimized for the manufacture of high performance AC filters for compensation equipment with high pollution such as UPS or wind turbines.
-
product
Capacitor for AC Filtering
PECA5
Lifasa - International Capacitors, SA
These capacitors are especially suitable for applications where high levels of AC voltage are required. The design of this series has been optimized for the manufacture of high performance AC filters for compensation equipment with high pollution such as UPS or wind turbines.
-
product
Capacitor for AC Filtering
PECA4 (440V)
Lifasa - International Capacitors, SA
These capacitors are especially suitable for applications where high levels of AC voltage are required. The design of this series has been optimized for the manufacture of high performance AC filters for compensation equipment with high pollution such as UPS or wind turbines.
-
product
Capacitor for AC Filtering
PECA4 (900V)
Lifasa - International Capacitors, SA
These capacitors are especially suitable for applications where high levels of AC voltage are required. The design of this series has been optimized for the manufacture of high performance AC filters for compensation equipment with high pollution such as UPS or wind turbines
-
product
Capsuhelic Differential Pressure Gage
4000
The Capsuhelic gage is designed to give fast, accurate indication of differential pressures. The gage may be used as a readout device when measuring flowing fluids, pressure drop across filters, liquid levels in storage tanks and many other applications involving pressure, vacuum or differential pressure
-
product
Carbon Monoxide Analyzer
OEM120-CO
The Neutronics OEM120-CO Carbon Monoxide Analyzer is a panel mounted analyzer that accurately measures carbon monoxide in the range of 0 to 200 ppm. Designed for continuous operation, this analyzer measures and displays the level of carbon monoxide in a workplace area and provides audible and visual alarms if the level exceeds predetermined setpoints.
-
product
Carbon Monoxide Analyzer
OEM100-CO
The Neutronics OEM100-CO Carbon Monoxide Analyzer is a wall mounted analyzer that accurately measures carbon monoxide in the range of 0 to 200 ppm. Designed for continuous operation, this analyzer measures and displays the level of carbon monoxide in a workplace area and provides audible and visual alarms if the level exceeds predetermined setpoints.
-
product
Carbon Monoxide Meter
ET110
The ET110 is an easy-to-use meter that detects and measures concentration levels of carbon monoxide (ppm) and temperature (oF/oC) making it the perfect choice for HVAC professionals. Backlit display with CO measurements (0 to 1000 ppm) and temperature (°F/°C ).
-
product
Carbon/Nitrogen Analysis by Combustion
928 Series
By incorporating state-of-the-art hardware and an on-board touch-screen software platform, the 928 Series allows you to easily handle the most demanding sample applications. The core capabilities and performance of previous generations of LECO macro combustion instruments have been maintained, while key improvements have been made in throughput, uptime, and reliability. Macro sample mass ability (up to 3 grams for Nitrogen/Protein model regardless of sample carbon content) with rapid cycle times and a resulting low cost-per-analysis make the 928 Series ideal for analysis of characteristically heterogeneous, difficult to prepare, or low analyte level samples.
-
product
CATV & SAT IF Optical Receiver Module
MRS-26D
Hangzhou Huatai Optic Tech. Co., Ltd.
*Ultra low noise push-pull technology *Band width of 2.7 GHz* 46dB CNR (typ.) for NISC with OMI = 4% at –8dBm optical input power @ 1550nm* 20dBmV RF output level (-5dBm,1550nm,OMI=4%)* Very low intermodulations *Low power consumption *Small package with single-mode fiber pigtail *Integrated optical demultiplexer (WDM filer) for RF overlay applications *Monitor voltage output and output disable input
-
product
CDNs
In addition to a range of 'conventional' CDNs, Laplace are unique in offering two other types. Both types are 'versatile' in that they are configurable, offering great flexibility in terms of the type of cable each model can be used with. This reduces the number of CDNs necessary to hold in stock. The final type is, in addition to being versatile, fitted with an output which monitors the RF level applied to the cable.
-
product
Certified RTOS
LynxOS-178
The software industry is concerned with safety and is facing big challenges to make the process of certification (to any standard) more repeatable, more efficient, and more cost effective. The general software industry has been working on software re-use and modularity for many years but these concepts only touched the surface of the DO-178B industry.The LynxOS®-178 RTOS is the first and only hard real-time DO-178B level A operating system to offer the interoperability benefits of POSIX® with support for the ARINC 653 APplication EXecutive (APEX).
-
product
Charging Scale
CS100
The Bacharach CS100 is a dependable, easy-to-use refrigerant scale and a key piece of equipment in every HVAC technician’s truck. It features a tethered display with stand, auto-zero feature, adjustable feet with built-in level, selectable weight range and units.
-
product
Chromatic Dispersion Emulator
CS-CDE
The ClearSpectrum™-CDE is a chromatic dispersion emulator suited for test and measurement. This 1U half 19-inch rack-mountable module is designed to emulate tens of thousands of picoseconds per nanometer in a compact unit while maintaining very low insertion loss. It is a passive, ready-to-use emulator which can be cascaded several times to achieve higher levels of dispersion.
-
product
Circuit Tracer Open/Closed
SureTrace™ 955
Receiver display rotates automatically for easy viewingIdentifies breakers and fuses with CertainCircuit™ detection*Pinpoints open and shorts*Traces wires*0-99 display of signal strength*Audible indication intensifies in tone/pitch with signal strength*Works on energized or de-energized circuits (0-600V AC/DC)*Four sensitivity levels*Peak reading bar graph*2-year warranty
-
product
Clamp-On Ultrasonic Flow Monitor
KATflow 10
The KATflow 10 is a simple ultrasonic clamp-on flow monitor, which provides an extremely cost-effective alternative to in-line flowmeters on effluent, wastewater and sludge applications. The KATflow 10 is used to monitor the flow of liquids containing higher levels of solids or entrained gas bubbles for measurements where a general flow indication is sufficient. The instrument is extremely simple to install and commission and is ideal for applications which demand good repeatability and reliable results.
-
product
Class 1 Integrating Sound Level Meter and Advanced Analyzer
HD2110L
HD2110L is an handheld integrating sound level meter performing either spectral or statistical analysis.
-
product
Class 1 Integrating Sound Level Meter and Analyzer
HD2010UC/A.Kit1
HD2010UC/A is a Class 1 integrating portable sound level meter performing either spectral or statistical analysis.
-
product
Class 1 Sound Level Calibrator
HD2020
The HD2020 sound level calibrator is a portable, battery operated sound source, suitable for sound level meters (portable and laboratory) and acoustic stations.
-
product
Class 2 Integrating Sound Level Meter and Analyzer
HD2010UC/A.kit2
HD2010UC/A is a Class 2 integrating portable sound level meter performing either spectral or statistical analysis.
-
product
ClearLine Level Switch
The ClearLine in-Line fluid detector is a point level switch that mounts directly into the process piping between two flat-faced flanges. This product is best suited for pump protection and low-level indication below vessels.
-
product
CL LX1 Base Frame Grabber
Xcelera-CL LX1 Base
Building on the field proven technology and performance of DALSA’s X64 frame grabbers, the X64 Xcelera™ Series leverages the PCI Express (PCIe) platform to bring traditional image acquisition and processing technology to new levels of performance and flexibility.The PCIe point-to-point host interface allows simultaneous image acquisition and transfer with little intervention from the host CPU.The X64 Xcelera -CL LX1 Base is a cost effective frame grabber based on the PCI Express x1 interface. Fully compliant with Camera Link (V. 1.20) specifications, the Xcelera-CL LX1 supports single Base cameras and can acquire images from a wide variety of multi-tap area and line scan, color and monochrome cameras.
-
product
Cloud Height Instruments
Bristol Industrial & Research Associates Ltd
Ceilometers are stand-alone instruments designed to measure cloud and aerosol height profiles using a laser based LIDAR (Light Detection And Ranging) technique. The light emitting component is a low power diode laser with the output power limited to an eye-safe level. They determine cloud base heights, penetration depths, mixing layer height and vertical visibilities. Within their operating range they reliably detect multiple cloud layers and cirrus clouds.
-
product
Coaxial Dynamics RF Attenuators
Coaxial Dynamics RF Attenuators offer a reliable and accurate method for reducing RF power levels. All of our designs dry convection cooled and can be used in any position.
-
product
Code Integrity
JScrambler
If you develop a security sensitive Web Application we believe that you don''t want to give any bonuses to possible attackers. JScrambler enables you to conceal as much as possible, the logic of your application, such as what information is gathered from the user, how it is processed on the client-side, how it is sent to the servers-side. Since our obfuscation introduces a certain level of randomness, it allows you to explore code morphing techniques, which can be vital in precluding attack automation.
-
product
Collimator Telescope
JUSKO
F. W. Breithaupt & Sohn GmbH & Co.KG
*Focal length 600mm*Objective aperture 60mm*Annular rings ground to high precision*Stabil ground plate*Reversion spirit levels (10’’/2mm)*Illuminated reticule with scale*Made in Germany
-
-
product
Color Screen Sound Level Meter
AWA6228+
Hangzhou Aihua Instruments Co., Ltd.
* A handhold noise measuring instrument* Multifunction and user- friendly sound level meter(sound level meter, integrating SLM, 1/1 OCT, 1/3 OCT analyzer, FFT analyzer, Noise dosimeter)* 240×320 color screen* Measurement range up to 142dB* Synchronously do integrating measure, statistical, real-time 1/1 OCT, 1/3 OCT, FFT analysis and noise dosimeter measure* Comply with IEC 61672 Class 1 and IEC61260 Class 1 and IEC 61252
-
product
Combinated Lux Meters
PeakTech Prüf- und Messtechnik GmbH
Combines a sound level, lux, air humidity and a temperature measuring device. It is therefore ideally suited for professional and private use. The sound level meter enables dB measurements and the determination of sound level ratios.
-
product
Combinated Sound Level Meters
PeakTech Prüf- und Messtechnik GmbH
Combines a sound level, lux, air humidity and a temperature measuring device. It is therefore ideally suited for professional and private use. The sound level meter enables dB measurements and the determination of sound level ratios.
