Showing results: 691 - 705 of 3723 items found.
-
Herrin Design & Manufacturing Co.
The Herrin Design Model 1644 Well System Pump Control is designed to provide a cost effective means of controlling water system reservoir levels. Through precise monitoring, the Well Control is able to reliably sense reservoir water levels by measuring water pressure at the well head. By monitoring reservoir levels at the well head, it is possible to mount the water system controls in one location, eliminating the costly communications link--leased lines or buried cables--between reservoir level sensors and the pumps. Typically, mechanical sensors at the reservoir deteriorate or are broken frequently due to weather; and communications lines are a large, continued expense.The Well Control tolerates temporary variations in water pressure due to surges and usage. The pump will not start until there is a constant low pressure level for 2-3 (variable) minutes (OFF TIME). This insures the pumps are activated only when necessary. Once the pump is turned on, it remains on for a preset period of time--up to 24 hours (ON TIME). During the pump cycle, the control does not rely on water pressure measurements to indicate if the reservoir is full. This feature eliminates sporadic pumping due to pressure variations created during the pumping cycle.
-
Residentual -
ClipperCreek, Inc.
BENEFITS OF RESIDENTIAL CHARGING: *Charge up to 7x faster than the Level 1 cordset that came with your electric vehicle. *Level 2 (240V) charging stations are more affordable than ever – starting at just $379! *Tax incentives and rebates offset purchase and installation costs, up to 100% in some areas *It’s more convenient to charge at home than using a public station. *Indoor/Outdoor rated (fully sealed NEMA 4 enclosures) *The Level 1 cordset that came with your electric vehicle can be used as a portable charging station or for a second charging station when you have company with an EV.
-
PCE Instruments
Here you will find gas analyzers that meet industry standards relating to personal safety and that are mainly used to detect and measure levels of methane, hydrogen sulphide, carbon monoxide, oxygen and 50 other gases. The auto-calibration function allows for easy calibration. Some of them also possess the ability to store values and can later transfer data to a computer. One accessory is the manual aspirator, with this device, you can draw gas directly into the analyzer via a 2 m long tube with which you will be able to measure gas levels without having to be in direct contact to the gas source or to be able to determine the levels of gas in places that are difficult to access.
-
ARC Technology Solutions
Have a complex system level or product level solution you need to develop that could use some engineering know-how? Whether it is a sophisticated mission critical system or a product with your IP that needs a host, ARC can help you deliver on these complex solutions. Our DSX product, can help support your IP and be the host processor for your design, or if a larger system, DSX could be an integral part of your system.Don’t recreate the architecture. Let our team of experts help configure your product solution – by leveraging the best in FPGA and system level PXI technology that ARC has already created for you.
-
783735-01 -
NI
24 V, 8 Channel (Sinking Input), 1 µs C Series Digital Module - The NI‑9423 works with industrial logic levels and signals to connect directly to a wide array of industrial switches, transducers, and devices. Each channel is compatible with 24 V logic levels, can accept up to … 30 V discrete logic levels, and has an LED that indicates the status. The NI‑9423 offers isolation between the input and output banks from channel to earth ground. The NI‑9423 is a correlated digital module, so it can perform correlated measurements, triggering, and sychronization when installed in a CompactDAQ chassis.
-
779009-01 -
NI
24 V, 8 Channel (Sinking Input), 1 µs C Series Digital Module - The NI‑9423 works with industrial logic levels and signals to connect directly to a wide array of industrial switches, transducers, and devices. Each channel is compatible with 24 V logic levels, can accept up to 30 V discrete logic levels, and has an LED that indicates the status. The NI‑9423 offers isolation between the input and output banks from channel to earth ground. The NI‑9423 is a correlated digital module, so it can perform correlated measurements, triggering, and sychronization when installed in a CompactDAQ chassis.
-
5501 CB -
Standard Electric Works Co., Ltd
● The 5501 CB transmitter is a great tool for locating and identifying cables and individual conductors● Locates both powered and unpowered cables ● Voltage measurement for cables: ACV 12V~450V DCV 12V~450V● Signal transmission • Transmission power level selection (includes 1, 2, 3) • Transmission signal code selection (includes F, E, H, d, L, C, O, A)● Flashlight & backlight function● Silent mode (disable button beep)● Level bar display on LCD screen (transmission power level indication)● Action wave display on LCD screen (when signal is transmitted)● Auto power-off function
-
DF High Purity -
Servomex Group Ltd
When your processes need high purity gas measurements for oxygen and moisture, DF analyzers deliver industry-leading performance that reaches down to the very lowest ultra-trace levels. Utilizing the exceptional sensing capabilities of Servomex’s coulometric and TDL sensing technologies for the measurement of oxygen and moisture respectively, DF analyzers are optimized for a sensitive and stable analysis at ppm, ppb and ppt levels.
-
SONAPHONE® S-SB10.xx -
SONOTEC GmbH
With the Stationary SONAPHONE S-SB10.xx and its associated probes machine and plant processes can be monitored permanently, insofar as a detectable ultrasonic level is generated. A fixed installation at an inspection point enables trend monitoring for longer periods. Based on changes of the ultrasonic sound level the assessment of plant condition is possible. Different probe versions support airborne sound and structure-borne sound applications.
-
DC to 220GHz -
Precision Milimeter Wave
RF Attenuators are components that reduce the amplitude level of an incoming frequency signal. They are used to protect systems from receiving a signal with a power level that is too high to process. There are various types of fixed attenuators that can fit your engineering needs. Precision MMW will help you with the highest quality fixed attenuator products needs.View more Fixed Attenuators
-
Micro Centurion II -
Raytech AG
Raytech Digital Micro ohm meter, Micro-Centurion II, was designed for high degree of accuracy to measure very low resistances. This technology was then packed into a portable test system to be used by apparatus manufacturers, rebuild shops, and electrical maintenance crews. This intelligent system has an easy to use operation screen, which allows quick selection of the current level and resistance level to be measured.
-
Teledyne Lincoln Microwave
The continuous evolution of radar systems creates an ever more complex RF power environment in which sensitive receivers must operate and survive. Teledyne limiters deliver vital protection for a wide range of receivers, providing protection from L-Band through to Ka-Band (1 - 40GHz) and peak power levels up to 1MW with unparalleled low insertion loss levels.
-
Silicon Turnkey Solution, Inc.
Most foundries provide wafers already probed to a set of DC parameters at room temperature to ensure they meet a basic subset of the package-part specification. Beyond this basic set of tests, more rigorous testing is often needed to meet specifications requiring die to be 100 percent probed, identify and segregate devices with higher performance levels and guarantee that parts will perform to a certain specification level.
-
3508 MMS ECM -
Abaco Systems Inc
The 3508 Electrical Conversion Module (ECM) provides six (6) RS-232 outputs and ten (10) RS-232 inputs. Built around Maxim 1488 & 1489 chips for true RS232 levels and voltage tolerance, all outputs come up in the 1, mark or idle state. Electrically this is a negative output voltage, the start bit is always a 0 or a positive voltage level.
-
5158 -
Abaco Systems Inc
The 5158 Electrical Conversion Module (ECM) provides eight (8) RS-232 outputs and eight (8) RS-232 inputs. Built around Maxim 1488 & 1489 chips for true RS232 levels and voltage tolerance, all outputs come up in the 1, mark or idle state. Electrically this is a negative output voltage, the start bit is always a 0 or a positive voltage level.
