Filter Results By:

Products

Applications

Manufacturers

Sensors

detect a physical event then translate to a representative analog signal.

See Also: Measurement, Detectors, Meters, Transducers


Showing recent results 1681 - 1695 of 2246 products found.

  • Thermal Conductivity System

    TPS 500 - Thermtest Inc.

    The economical Transient Plane Source TPS 500 for transient measurement of absolute Thermal Conductivity, thermal diffusivity and specific heat from 0.03 to 100 W/mK. The TPS 500 Thermal Conductivity Instrument is designed for testing thermal transport properties of solids, paste and powders, including various types of geometry and dimensions with the use of special two-sided or single-sided TPS sensors.

  • Thermo Hygrometers

    PCE Instruments

    Thermo hygrometers are useful for measurements of humidity. Humidity is a representation of the concentration of water vapour in the air where the value is shown as a percent. Thermo hygrometers have sensors which measure humidity of the air and temperature of the air. Both values will be shown as a digital representation and converted into the desired unit. The result will then be shown via display or on a chart. On our site, you will find thermo hygrometers that can measure air humidity, or combined devices that canThese Thermo Hygrometers measure different ranges of humidity and temperature depending on the model. also measure temperature.

  • Thermometers

    PCE Instruments

    There are thermometers to measure different temperature ranges between -200 and 1800ºC. Measurement of temperature is done in many different sectors. We also offer thermometers that can indicate temperature in ºC, K (Kelvin) and ºF, such as the PCE-8Contact Thermometers for measuring and recording temperature80 thermometer, as well as others that are water resistant. A wide range of thermal elements and type-K sensors are available for thermometers. ISO calibration certificates, which include a laboratory calibration, can be ordered for most of our thermometers.

  • Thermometers

    PCE Instruments

    At PCE Instruments you will find both contact and non-contact thermo-hygrometers as well as devices for measuring and recording temperature. There are thermometers to measure different temperature ranges between -200 and 1800ºC. Measurement of temperature is done in many different sectors. We also offer thermometers that can indicate temperature in ºC, K (Kelvin) and ºF, such as the PCE-8Contact Thermometers for measuring and recording temperature80 thermometer, as well as others that are water resistant. A wide range of thermal elements and type-K sensors are available for thermometers.

  • THERMO MODULE OF THE COMPACT DEVICE FAMILY

    ES620 - ETAS GmbH

    This module measures temperatures using 16 electrically insulated measuring channels for temperature sensors. The adjustable acquisition rate per module is 10 samples/s to 0.1 samples/s. Signal smoothing occurs through a parameterized software filter, and high measuring accuracy is possible through 21 Bit resolution. The automotive measuring range is -210 C to 1372 C (-346 F to 2502 F); J, K, and N type thermocouples are used. Data transfer to PC occurs via Ethernet.

  • Thickness Measuring Microscope Systems

    TMS150 / TMS200 - McBain Systems

    The McBain TMS150 and TMS200 uses a unique combination laser displacement sensors, motion control technology and proprietary software to inspect features developed on wafers. This combination of technologies allows simultaneous over/under high-resolution inspection in real time. Recipe driven software assures high throughput while allowing maximum product flexibility and ease of development. Automatic wafer alignment helps to assure maximum repeatability and ease of use.

  • Turbo actuator tester

    ScopeTester 5 - DeltaTech Electronics

    ScopeTester 5 is 5-channel oscilloscope tester for PC computers. Unlike traditional oscilloscopes it is capable of continuous acquisition of signals without dead times. This feature gives exceptional diagnostic value. Available voltage ranges matches typical signals found in modern cars. The user may connect to vehicle sensors, actuators and other diagnostic equipment, such as current clamps, inductive and capacitive probes and other diagnostic probes.

  • Systems Tool Kit

    STK - Analytical Graphics, Inc.

    STK is a free 2D and 3D modeling environment used by engineers, mission analysts, operators and decision-makers from more than 700 global organizations to model complex systems (such as aircraft, satellites, ground vehicles and their sensors) to evaluate their performance in real or simulated time. Built on a time-dynamic, physics-based geometry engine, AGI software answers fundamental questions essential to solving dynamic analysis problems

  • Ultra High Speed Framing Camera

    SIM-D - Specialised Imaging Ltd.

    The Specialised Imaging Ultra Fast Framing Cameras offer the ultimate in ultra-high-speed imaging performance to scientists and engineers across all disciplines. The all-new custom optical design offers up to 16 images without compromising shading, or parallax. High resolution intensified CCD sensors controlled by state-of-the-art electronics provide almost infinite control over gain and exposure to allow researchers the flexibility to capture even the most difficult phenomena.

  • Ultrasonic Flowmeters for Thermal Energy Measurement

    Energy Meters - Katronic

    Three of the Katronic clamp-on ultrasonic flowmeters can be supplied as heat quantity measurement instruments and are increasingly being used as portable and permanently installed energy meters by various industries and municipal organisations. The clamp-on mounting technique of the flow and temperature sensors enables the flowmeters to measure heat quantity non-invasively without the risk of interruption of flow, pressure drop or leakage.

  • Ultrasonic Sensing MSP430™ Microcontrollers for Water‑‑MeteringApplications

    MSP430FR6047 - Texas Instruments

    Best-in-Class Ultrasonic Water-Flow Measurement With Ultra-Low Power Consumption. <25-ps Differential Time-of-Flight (dTOF) Accuracy. High-Precision Time Measurement Resolution of <5 ps. Ability to Detect Low Flow Rates (<1 Liter per Hour). Approximately 3-µA Overall Current Consumption With One Measurement per Second.Compliant to and Exceeds ISO4064, OIML R49, and EN 1434 Accuracy StandardsAbility to Directly Interface Standard Ultrasonic Sensors (Up to 2.5 MHz)

  • Universal Testing Device

    Delphin Technology

    Integrated signal conditioning makes measurement transducers unnecessary. All analog inputs can be used universally. Each analog input can be connected with a thermocouple, a RTD or voltage and current signals. Galvanic isolation of the analog inputs to each other as well as to the power supply ensures secure measurement data acquisition. Galvanic isolation also prevents earth loops or short circuiting through non-isolated sensors.

  • Temperature Calibration Software v5.0

    MET/TEMP II - Fluke Calibration

    MET/TEMP II software enables you to easily automate the calibration of a wide range of temperature sensors. Version 5 updates this popular application by offering compatibility with the Microsoft Windows 7 and 8 operating systems and including support for our most recent temperature calibration sources -- the 9190A Ultra-Cool Field Metrology Well » and 9118A Thermocouple Calibration Furnace ».

  • Temperature Calibrators

    Fluke Calibration

    Ensuring process temperature accuracy involves calibrating not only the system’s electronic temperature signals, but also the very temperature sensors that initiate those signals. Rugged Fluke handheld temperature calibrators source and measure RTDs and thermocouples, power transmitters, and store data. Fluke Calibration temperature sources cover temperatures from -45 °C to 1200 °C and include handheld, portable, and benchtop calibrators. Infrared thermometer calibrators and reference measurement thermometers ensure every necessary tool is available to you.

  • Temperature Calibrators

    Fluke Corporation

    Fluke Temperature Calibrators simulate process sensors for testing temperature instrumentation. Specifically designed for the field, these lightweight compact tools are EMI tolerant, dust and splash resistant and offer an easy to use single push button interface. When paired with a temperature sensor they can take high accuracy temperature measurements to verify process temperatures and ensure the highest product quality and safety. There are a variety of different temperature calibrators designed for your unique calibration and testing requirements.