Filter Results By:

Products

Applications

Manufacturers

Sensors

detect a physical event then translate to a representative analog signal.

See Also: Measurement, Detectors, Meters, Transducers


Showing recent results 1861 - 1875 of 2221 products found.

  • Measuring devices for magnetically soft materials

    MAG-TD200 - R&J Measurement

    In case of alternating field the system uses the following test circuits: Epstein frame, SingleSheetTester, yoke for sample with dimensions (280x30) mm, yoke for sample with dimensions (100x100) mm and toroidal sample. There is also a possibility to use another test circuits according to customer''s requests. When test circuits, mentioned above are equipped with appropriate sensors, the system allows measuring dynamic magnetic properties based on indirect or direct measurement of magnetic field strength. The system is able to measure the properties of ferromagnetic materials in alternating field with simultaneous determination of field strength by direct and indirect method, as well.

  • High Performance Polyphase Energy Metering AFE w/ Power Quality Analysis

    ADE9000 - Analog Devices Inc.

    The ADE9000 is a highly accurate, fully integrated energy-metering device. Interfacing with both current transformer (CT) and Rogowski coil sensors, the ADE9000 enables users to develop a three-phase metrology platform, which achieves high performance for Class 1 through Class 0.2 meters. Power quality features enable advanced meter designs with fast rms measurements and power quality level monitoring for EN50160 compliance. The ADE9000 integrates seven high performances ADC’s, a flexible DSP core. An integrated high-end reference ensures low drift over temperature with a combined drift of less than ±25 ppm/°C max for the whole channel including PGA and ADC.

  • High-Performance Surface Plasmon Resonance System

    SPR-32 - Bruker Daltonics

    Features like ‘Frame Inject’ allows for turn-key sample processing protocols and customized workflows created together with pharmaceutical customers. The faster data analysis and highly intuitive user interface combine to deliver an industry-leading SPR throughput of 10,000 control-substracted binding measurements. Combining flexible 8-needle sample delivery with a 32-sensor detection array laid out in 8 detection flow cells, enables 4 sensors per flow cell, an important advantage for controlled, high-throughput SPR methods. The patented Hydrodynamic Isolation™ technology enables ‘Any Sample, Any Sensor, Any Time’, making it the preferred platform for screening, kinetics, thermodynamics and epitope mapping for pharmaceutical applications.

  • Magcam MiniCube1D

    MagCam NV

    Magcam's MiniCube1Dmagnetic field camera provides quantitativeBz magnetic field mapping in a 12.7mm x 12.7mm 2D planewith 0.1mm spatial resolution, measured at high speed. The camera is based on Magcam's unique integrated 2D Hall sensor array technology, featuring more than 16000 microscopic magnetic field sensors on one single chip. Each sensor independently measures the local magnetic field, resulting in quantitative2D magnetic field maps with high spatial resolution, measured athigh speed. These magnetic field maps contain a large amount of information about the magnet's properties, which can be extracted using Magcam's powerful MagScope measurement and analysis software.

  • Magmeter Flow Sensor

    2551 - Georg Fischer Signet

    The Signet 2551 Magmeter is an insertion-style magnetic flow sensor that features no moving parts. The patented* sensor design is available in corrosion-resistant materials to provide long-term reliability with minimal maintenance costs. Material options include PP with stainless steel, PVDF with Hastelloy-C, or PVDF with Titanium. Utilizing the comprehensive line of Signet installation fittings, sensor alignment and insertion depth is automatic. These versatile, simple-to-install sensors deliver accurate flow measurement over a wide dynamic range in pipe sizes ranging from DN15 to DN900 ( to 36 in.), satisfying the requirements of many diverse applications.

  • Data Acquisition Instruments (DAQ)

    NH Research, Inc.

    Each data acquisition device channel provides its own high resolution 24-bit DAQ, a separate per channel measurement range, and each channel is fully isolated from all other channels. This makes it possible for adjacent voltage channels to measure cell voltages as well as module, string and pack voltages at the same time (figure 1). Additionally, temperature measurement channels are independently programmable for each thermocouple type (B, E, J, K, N, R, S, and/or T) allowing any combination of temperature sensors to be used.

  • Data Aquisition System

    KiDAQ - Kistler Instrument Corp.

    KiDAQ is an innovative, modular data acquisition system (DAQ) from Kistler. With it, you can create your test setup, perform your measurements and achieve reliable results almost instantly. Our expertise covers the entire measuring chain, from the sensor, to signal conditioning, and on to the software. The KiDAQ data acquisition system can be expanded at any time with measuring modules and measuring units. Third-party sensors can also be integrated into the system. Our unique software guides you step-by-step through the measurement setup and provides the user with valuable insight over the entire measuring chain.

  • Compact Temperature Calibrator

    CTC Series - AMETEK Sensors, Test & Calibration

    CTC Series Compact Temperature Calibrator from AMETEK Sensors, Test & Calibrations is engineered for “advanced simplicity,” incorporating a number of useful features that greatly extend the range and functionality of the popular temperature calibrator. The CTC Series offers an easy-to-read, full-color display with improved navigation that provides easy access to the calibrator’s latest features. The CTC Series now contains an auto step function with up to 12 preset temperature points, an optimized switch test with automatic up and down test runs, assisted manual calibration using pre-defined temperature points, and memory to store up to 5 calibration processes.

  • DC Power Supplies

    Tektronix, Inc.

    Single- and multiple-output power supplies for education, research, design, and automated testingPower levels up to 1080W with voltages up 10kV and currents up to 108ASpecialized battery-simulating power suppliesEquipped with advanced features, including current measurement with nanoamp resolution, variable rise/fall times, analog inputs, digital I/O, and programmable interfacesReady for today’s challenging applications:Power new components, circuits, and devices for design or automated testPerform breakdown tests on high power transistorsPower and test low power, portable, battery-operated products such as IoT devices, medical products, mobile phones, tablets, and remote industrial sensors

  • Conductivity-Resistivity Sensor Electronics and Integral System with PVDF Sensor

    2850 - Georg Fischer Signet

    The Signet 2850 Conductivity/Resistivity Sensor Electronics are available in various configurations for maximum installation flexibility. The universal mount version is for pipe, wall, or tank mounting and enables single or dual (digital versions only) inputs using any standard Signet Conductivity/Resistivity sensor. The threaded j-box version can be used with these same Signet sensors for submersible sensor mounting. It is also available as a combined integral system configuration for in-line mounting and includes a conductivity electrode in a choice of 0.01, 0.1, 1.0, 10.0 or 20.0 cm-1 cell constants. The 2850 is ideal for applications with a conductivity range of 0.055 to 400,000 S or a resistivity range of 18.2 M to 10 k.

  • Gas Analysis

    Sensors, Inc.

    Accurate measurement of gases and their concentrations is critical in many applications, and often poses a major challenge. Sensors' experience with different measurement principles, including NDIR, NDUV, and thermal conductivity, along with the ability to provide special combinations of these techniques within our products, enables us to tackle these challenges. In addition, our experience goes into every detail of our gas analyzers, ensuring reliable results, even under harsh conditions. Our skilled team of experts is happy to assist you in finding the optimized solution for your measurement requirements, with either off-the-shelf components or a customized solution.

  • Hall Effect Sensor

    DER EE Electrical Instrument

    The hall effect sensor products are manufactured according to international standards. Being an ISO 9001:2008, ISO 14001 and OHSAS 18001 certified company, DER EE is capable of designing and producing superior products to the highest standards of customers' requirements. Hall effect sensors we provided are a device containing both the sensor which produces a very low signal level and contains the vacuum tube amplifier and a high gain integrated circuit (IC) amplifier in a single package. hall effect sensor offer many applications to sense position and motion, to control electric motor control, to sense wheel rotation and so on.

  • Galvanic Isolation Amplifier

    X005 Series - Positek Limited

    The X005 Galvanic Isolation Amplifier provides a regulated and resistively limited +5V dc power supply required by the sensors, it can be connected in three or five wire modes. Used in five wire mode positive and negative sense inputs enable the X005 to dynamically adjust the sensor supply thus ensuring the correct voltage across the sensor. Connected in this way the X005 can compensate for 15 conductor resistance. The sense terminals are linked internally so the end user can use the X005 in three wire or five wire mode without the need to fit or remove external links.

  • Photonic Components

    Fraunhofer Institute for Telecommunications

    The Department of Photonic Components is researching optochips and Photonic Integrated Circuits (PICs) for transmission and reception of more than 100 Gbit / s and the sensors. The department provides production and development services for all activitiesfor the German and international industry. If, for example, you already think of a particular optochip concept, the researchers offer additional advice and take over design and production steps. On the other hand, if you would like to start with a target specification, a feasibility study will begin and your own concept will be developed for you. Researchers are always ready and able to carry out initial production volumes in an ISO certified, qualified manufacturing facility. In addition, e-beam services and diffractive optical elements developed according to specifications are offered.

  • Pitot / Static Tester for Laboratories and Workshops

    ADSE 741 - ATEQ Aviation

    The ADSE 741 is a complete high performance three channel Ps, Pt and AoA stand-alone test bench specially designed to be used in the workshop or in the laboratory to test and calibrate all air data equipment such as altimeters, vertical speed indicators, air speed indicators, pneumatic AoA (Angle of Attack) indicators, MACH-meter, air data computers, specific probes and sensors.The high precision embedded sensors enable the ADSE 741 to be used as a pressure standard.The user interface is programmed underWindows and Labview, with a data base managed in a spreadsheet for easy evaluation, management, statistics and presentation.