Showing results: 76 - 90 of 152 items found.
-
Phoenix Aerial Systems
The RANGER-LR22 LITE is the new lighter, long-range system configuration of our RANGER Series. Designed for the most demanding mapping applications, the RANGER-LR22 LITE is the ultimate combination of high density, long-range LiDAR with a powerful 1,550 nm laser and up to 15 returns that penetrate dense vegetation at high speeds and altitudes in large scan regions.
-
TD-24-AC-T -
Taylor Dynamometer, Inc.
The TD-24-AC-T is a self-contained, portable, motorized, Chassis Dynamometer specifically designed for testing Over-the-Highway (OTH) trucks. Rated to test at altitudes up to 10,000 ft (3,048 m), the TD-24-AC-T is road-legal and offers side loading with ramps. The Portable AC Chassis Dynamometer takes less than 60 minutes to set up and begin testing.
-
C163 -
UEi Test & Measurement Instruments
Backed by UEi Service+ to give up to 6 years’ warranty, next day recertification, and a reduced cost of ownership. The C163 Residential/Commercial Combustion Analyzer is easy to use with a rugged design, multiple sensor protections, altitude compensation and differential pressure. Prints to optional printer and wireless App. Essential information for installing and maintaining furnaces and boilers all in one device.
-
TTU-205 Series -
TestVonics, Inc.
The TTU-205 Series are rugged, self-contained flightline test systems which can be used to accurately simulate in flight pressure conditions. This is done by precisely controlling and measuring Altitude and Airspeed pressure to aircraft’s pitot static system. The TTU-205 can be used to test, certify, calibrate, and troubleshoot aircraft pitot-static systems or associated pneumatic flight control systems. The dual channel operation allows operators to perform dynamic, qualitative calibration and leak test for "on ground" simulation of altitude and airspeed pressures. The accuracy and operational capabilities meets or exceeds test requirements for military as well as commercial aircraft. The TTU-205/J model is an RVSM compliant test set.
-
ADC-2500V3 -
TestVonics, Inc.
TestVonics ADC-2500V3 Air Data Calibrator is a high accuracy pitot static air dat calibrator. The calibrator is capable of controlling and measuring Altitude and Airspeed pressures with the highest degree of accuracy. The control and measurement ranges and accuracies of the calibrator meet and/or exceed requirements for both commercial and military applications . Currently all USAF PMEL organizations are standardizing their ADC-2500 calibrators to V3.
-
C161C -
UEi Test & Measurement Instruments
Backed by UEi Service+ to give up to 6 years’ warranty, next day recertification, and a reduced cost of ownership. The C161 Residential Combustion Analyzer is easy to use with a rugged design, multiple sensor protections, altitude compensation and now adds a heat exchanger test. Prints to optional printer. Essential information for installing and maintaining furnaces and boilers all in one device.
-
C161 -
UEi Test & Measurement Instruments
Backed by UEi Service+ to give up to 6 years’ warranty, next day recertification, and a reduced cost of ownership. The C161 Residential Combustion Analyzer is easy to use with a rugged design, multiple sensor protections, altitude compensation and now adds a heat exchanger test. Prints to optional printer. Essential information for installing and maintaining furnaces and boilers all in one device.
-
C161KIT -
UEi Test & Measurement Instruments
Backed by UEi Service+ to give up to 6 years’ warranty, next day recertification, and a reduced cost of ownership. The C161 Residential Combustion Analyzer is easy to use with a rugged design, multiple sensor protections, altitude compensation and now adds a heat exchanger test. Prints to optional printer. Essential information for installing and maintaining furnaces and boilers all in one device.
-
C163KIT -
UEi Test & Measurement Instruments
Backed by UEi Service+ to give up to 6 years’ warranty, next day recertification, and a reduced cost of ownership. The C163 Residential/Commercial Combustion Analyzer is easy to use with a rugged design, multiple sensor protections, altitude compensation and differential pressure. Prints to included printer and is wireless to a free printer App. Essential information for installing and maintaining furnaces and boilers all in one device.
-
Extech DO210 -
Extech Instruments Corporation
The DO210 is a Dissolved Oxygen Meter which measures DO from 0 to 20.0mg/L, Oxygen Percent from 0 to 100.0% and Temperature with ATC. This meter features Adjustable Altitude and Salinity Compensation as well as min, max and data hold functions. Complete with DO probe with membrane and 39" (1m) cable, two spare replacement membranes, electrolyte, 9V battery and soft case.
-
TTTech Computertechnik AG
The AFDXEnd System Rugged is equipped with two 10/100/1,000 Mbit/s Ethernet P14 rear-I/O ports running at full-duplex speeds. The conduction-cooled design of the board enables operations under the harshest conditions: withstanding forces up to 40G, vibrations of 2,000 Hz and temperatures of up to +85 °C while remaining fully operational at an altitude of 18,300 m (60,000 ft).
-
TTTech Computertechnik AG
The TTEEnd System A664 Rugged is equipped with three 10/100/1,000 Mbit/s Ethernet P14 rear-I/O ports running at full-duplex speeds. The conduction-cooled design of the board enables operations under the harshest conditions: withstanding forces up to 40G, vibrations of 2,000 Hz and temperatures of up to +85 °C while remaining fully operational at an altitude of 18,300 m (60,000 ft).
-
National Technical Systems
NTS is one of only a few facilities in the world capable of performing simulation testing that mimics the extreme conditions found in the upper atmosphere and outer space. By precisely controlling temperature, altitude and humidity, we give you a clearer picture of how your product will respond, allowing you to make engineering changes that reduce your liability and simplify your path to regulatory compliance.
-
PeakTech Prüf- und Messtechnik GmbH
For sound level measurements in extreme conditions, at high altitudes or high demands on the accuracy of the measurement results, sound level meters should be checked prior to the measurement with a sound level calibrator. Also for calibration and verification of microphones in audio technology, you need a sound level calibrator, which is designed to produce several sound pressure levels at a fixed frequency characteristic. This calibrator has two switchable calibration steps.
-
Panda -
Neulog
The NeuLog Panda multi-sensor can be used for any science experiment which utilizes Room Temperature, Light, Barometric pressure, Altitude, Sound, Relative Humidity, Dew-Point, Magnetic Field and G-Acceleration readings.Panda is used for environmental data collection and other experiments in Natural Science, Biology, Physics and Chemistry. It is specially designed for primary school level.The multi-sensor comes pre-calibrated so you can start experimentation right out of the box