Filter Results By:
Products
Applications
Manufacturers
Blue Lasers
Wavelength 400-500 nm.
-
product
USHIO Blue Violet Laser Diodes (375nm - 405nm)
The Optoelectronics Company Ltd
The USHIO HL40071MG is a single transverse mode 405nm laser diode which offers 300mW optical output power in a 5.6mm package with typical optical and electrical characteristics, (Tc=25 degrees C, cw), of 50mA threshold current, operating current of 280mA, operating voltage 6.0V, 6 degrees beam divergence parallel to the junction, 15 degrees beam divergence perpendicular to the junction, laser diode reverse voltage of 2V and operating temperature of 0 to +70 degrees C.
-
product
Osram High Power Blue Violet Laser Diodes (450-488nm)
The Optoelectronics Company Ltd
OSRAM Opto Semiconductors is a key player in the field of visible InGaN (Indium Gallium Nitride) lasers. OSRAM Opto Semiconductors offer leading product performance and innovative packaging. Thanks to their excellent beam quality, OSRAM laser diodes are ideally suited for the optical imaging of light. Not only that, but their small package size is particularly beneficial to highly compact systems, such as pico projectors. OSRAM laser diodes offer high efficiency and long lifetime: due to their excellent efficiency (ratio of light produced compared to electric power consumed), the temperature increase experienced by blue InGaN lasers during operation is kept to an absolute minimum, allowing them to deliver a long life – up to 10,000 hours at 40 °C.
-
product
PCI Three-Axis High Performance Laser Board with External Sampling
N1231B
The Keysight N1231B PCI Three-Axis Laser Board with External Sampling is a register based PCI bus board that implements three axes of laser interferometer measurement for position monitoring and closed-loop servo control. There are four external sample inputs along with four data hold inputs that allow easy synchronization with user systems. Several threshold compare registers, with both hardware outputs and interrupt capability, can be used for travel limit and in window or out of window detection functions. The dual mode hardware position outputs, controlled by the hold inputs, provide either a 32-bits/axis parallel interface or a 36-bit multiplexed interface to the 36-bit axis position data at rates up to 20MHz. The user can programmatically access the externally sampled position and velocity data, as well as software sampled position and velocity data, over the PCI bus at rates up to 100kHz (3 axes of position and velocity) or 200kHz (position or velocity only).
-
product
PCI Three-Axis Laser Board
N1231A
The Keysight N1231A PCI Three-Axis Laser Board is a register based PCI bus board that implements three axes of laser measurement for position monitoring and closed-loop servo control. The hardware outputs, optimized for connection to a DeltaTau PMAC servo control system, provide parallel digital position data at rates up to 4MHz. The same position data along with velocity data is available over the PCI bus at rates up to 100kHz (3 axes of position and velocity) or 200kHz (position or velocity only).
-
product
Fixed Wavelength CW Laser Source (DFB)
Laser 1200 Series
The Laser 1200 Series is a highly customizable fixed-wavelength Continuous Wave (CW) laser source available in a wide range of wavelengths and powers.With seamless PXI integration, it can be easily integrated into new or existing PXI test setups. Save space, lower your costs and improve testing efficiency while delivering reliable and repeatable results in production or research environments.
-
product
Tunable Laser Source - PXI
Laser 1000 Series
The Laser 1000 Series PXIe module is a Continuous Wave (CW), tunable laser source offering high-power output, narrow 100kHz linewidth and 0.01pm resolution tunability.With seamless PXI integration, it can be easily integrated into new or existing PXI test setups. Save space, lower your costs and improve testing efficiency while delivering reliable and repeatable results in production or research environments.
-
product
Tunable Laser Source - MATRIQ
The Laser 1000 Series is a fully-compliant micro-ITLA laser with up to four channels in a compact benchtop form factor.Offering 0.01 pm resolution tunability across C or L bands, exceptional power accuracy up to 16.5dBm, and optional dither suppression, this is a versatile and cost-effective general purpose instrument.
-
product
Fixed Wavelength CW Laser Source (FP) - PXI
Laser 1100 Series
The Laser-1102 is a Continuous Wave (CW) laser source offering high power 850 nm output into multimode fiber with stable output power operation.
-
product
Fixed Wavelength CW Laser Source (FP) - MATRIQ
The Laser-1102 is a Continuous Wave (CW) laser source offering high power 850 nm output into multimode fiber with stable output power operation.
-
product
Diode Lasers
Spot Creator
Advanced Photonic Sciences LLC
Spot Creator is an innovative accessory developed for enhancing the performance of blue laser diode based engraving and cutting machines. Spot Creator solves a major problem with using asymmetric blue laser diodes: the production of engraving features that are different in the X-Y directions, resulting in unequal or blurred lines. Using Spot Creator, line widths are equal in the X-Y directions, with a minimum spot of 50 μm. The intensity on the engraved part is thus maximized.
-
product
Environment Meter
*Measures surface temperature without contact*Laser pointer for accurate use*Easy to read large digital display*Blue backlight*Low battery indication
-
product
Robotic Vehicle Gap / Flush Measurement System
Automation
LaserGauge® Automation is a robotic system for measuring vehicle gap/flush on a moving assembly line. It is cost-effective, fast, flexible, and delivers LaserGauge® accurate measurements. Utilizing the Cross-Vector scanning and Blue Laser Technology, the system provides more assembled-panel surface information than any other robotic laser profiler.
-
product
Economical LED Display for Remote Annunciator Applications
AN-3100D-LC
LED Illumination for long life, low power Laser Printed window Legends Compact Size Barrier, screw terminal connection Panel or 19" Rack Mounting 4 Windows Sizes: 3x3, 1.5x3, 1x3, 1.5x1.5 Selectable Window Colors: White, Red, Blue, Green Amber Built-in Test Pushbutton option
-
product
DSP Sensors
Now available with an optional blue laser, LaserGauge® DSP Sensors are totally self-contained and allow single stripe, Cross-Hatch or Cross-Vector scans with unmatched speed and flexibility. DSP Sensors are capable of scanning a wide variety of surface types including solid metal, paint, plastic/rubber, headlamps, tail lamps, window glass, composite, chrome surfaces.
-
product
Pocket Thermometers
Among our most popular IR thermometers the SIG2 Gun-Style Thermometer features a 10:1 field of view. A bright blue backlight and laser guide make taking fast and accurate temperature readings easier, better and faster. The SIG1 comes with a protective lens cap and body wrap. It works faster than thermistor-based temperature instruments and has a range of -22°F to 1022°F. Includes Auto-Power Off to conserve battery life.
-
product
Diode Lasers
6-Watt Blue Spot Creator
Advanced Photonic Sciences LLC
*Simple Installation On X-Y-Z CNC Machines*Adjustable Focusing Lens to Create 50, 80, and 100 Micron Diameter Spots*Create High Intensities on Target*Self-Contained Fully Integrated Laser Module Including High Power Blue Diode, Active Cooling, Beam-Forming Optics, and Power Supply*Stable Output Power*Precision Engineering*Rapid Engraving, Etching, and Marking*Modulate Up To 250 kHz*Proportional Control in CW Mode Using 5V CW Signal*High Efficiency*Simple to Power Up and Operate
-
product
Metrology Equipment
Exact Metrology sells, services and implements metrology equipment from the 3D scanning industry's leading manufacturers. Our highly trained team can configure our comprehensive lineup of portable CMMs, 3D scanners, 3D laser scanners and 3D metrology equipment & digitization equipment and software for practically any application.You'd have to scan far and wide to find a more inclusive selection of 3D metrology equipment. We sell everything from Faro arms to 3D body scanners; white light scanners to blue light scanners; coordinate measuring machines to desktop 3D scanners.
