Filter Results By:
Products
Applications
Manufacturers
-
product
CM AXIe-0 system module
CM AXIe-0 MODULE
CM AXIe-0, made in the AXIe standard, is designed to work as part of measuring systems created on the basis of the AXIe-0 backbone. CM AXIe-0 is intended for use as part of AXIe-0 standard crates with the number of seats (slots) not more than 14. CM AXIe-0 complies with the requirements of the AXIe-0 standard for system modules of the AXIe-0 bus.
-
product
High-Speed Digitizers
ADP7000 Series
Guzik AXIe ADP7000 Series High-Performance Digitizer and Digital Processor combine high-speed waveform digitizer with built-in digital signal processing, which both enable mixed-domain signal capture and analysis with high-speed data transfer links to computers. The ADP7000 Modules (ADP7084 and ADP7104) come in a display-less 2U high 19” AXIe modular form factor.
-
product
PCIe X8 And X1 Bridge Card
The Guzik PCI Express Host Interface Bridge Card was designed to expand the x8 PCI Express Gen 2 (PCIe) slot in a host PC to an AXIe or a Guzik GSA 6000 chassis via a x8 PCI Express Gen 2 and a x1 PCI Express Gen 1 high speed PCI-SIG specified data cables. This allows the end node to connect to the host bus at speeds up to 3.2GByte/sec user data rate. The Bridge Card installs in a x8 or x16 slot of a PCIe backplane or a PCIe motherboard, provides additional board-based retention and reinforced front panel.
-
product
PXIe Module Carrier
HMPXI AXIe-1
The PXIe module carrier, HMPXI AXIe-1 Gen3 x4, is specifically designed to support PXIe modules in AXIe systems, allowing you to maximize the best of both standards in a single system. The HMPXI AXIe-1 carrier is designed as a single-slot AXIe-1 module and allows you to simultaneously install two single-slot PXIe modules.
-
product
Signal Generator High-Frequency GSM AXIe
The hardware-software complex "High-frequency GSM signal generator AXIe" is designed to generate harmonic sinusoidal signals with analog modulation (AM, FM, PM, IM) or without modulation in the frequency range from DC to 10 GHz.
-
product
VVK AXIe Switch
VVK AXIe MODULE
Based on the VVK AXIe module, up to 1500 channels of the TEST-9110-AXIe cable tester can be placed in a 6-slot AXIe crate, 3900 channels can be easily placed in a 14-slot crate, which in terms of channel density is a record among analogues on the Russian market.
-
product
14-slot Chassis
CH-14 AXIe-0
The 14-slot AXIe-0 chassis is intended for use in modular measurement information systems based on the AXIe standard.
-
product
4-slot Chassis
CH-04 AXIe-0
The 4-slot chassis in the AXIe-0 format is intended for use in modular measuring information systems based on the AXIe standard.
-
product
6-slot Chassis
CH-06 AXIe-0
The 6-slot chassis in AXIe-0 format is intended for use in modular measurement information systems based on the AXIe standard.
-
product
8-bit Digitizers
ADC6000
Guzik AXIe ADC 6000 Series Digital Acquisition and Processing Modules combine high-speed waveform digitizer with built-in digital signal processing hardware, which enables mixed-domain signal capture and analysis with high-speed data transfer link to a computer. The ADC 6000 Modules come in a space-saving display-less 1U 19” AXIe modular form factor.
-
product
9-slot Chassis
CH-09 AXIe-0
The 9-slot chassis in AXIe-0 format is intended for use in modular measurement information systems based on the AXIe standard.
-
product
AXIe-0 6-Slot All-In-One (2800W)
MONOBLOCK AXIE-0 6 SLOTS
The latest multifunctional platform based on a monoblock in the AXIe standard is designed to create compact workplaces for checking and adjusting the parameters of electronic components
-
product
AXIe PDC Switch
The AXIe CCP module implements a 32x16 matrix switcher structure (32 inputs – 16 outputs). KCP is an indispensable module for use as part of combined systems for checking the parameters of radio-electronic units.
-
product
Digital and RF Testing
Amoeba® 5600
Built from the ground up based on AXIe and PXIe platforms, it offers the best of both worlds in terms of flexibility and power.
-
product
Attenuator
RFATT AXIe-0
*Dual channel AXIe attenuator with frequency range from 9 kHz to 10 GHz.*The module is designed to work as part of information measuring systems as a normalizer of radio frequency signals (power control: signal amplification or attenuation).
-
product
Microwave Switch RF Switch - 26.5G AXIe
RF Switch-26.5G AXIe Module
The RF Switch-26.5G AXIe module is designed to work as part of information measuring systems as a radio frequency signal switch (one input to six outputs for each of the eight input lines).
-
product
AXIe Switch Module
PK100x4
The PK100x4 AXIe module implements a 100x4 matrix switcher structure (100 inputs – 4 outputs). The module is designed to work in functional control systems, systems for monitoring and diagnostics of ground-based electronic equipment, control systems for bench tests.
-
product
Chassis, Carriers And Controllers
Automated measuring systems based on the open standards AXIe, VXI, LXI and PXIe have enclosures (base units or chassis) in which modules of a given standard are mounted. Informtest Holding manufactures a wide range of chassis in open standards AXIe, VXI, LXI and PXIe.
-
product
Transceiver
MT
Mezzanine MT (mezzanine transceiver) is designed to receive and transmit microwave signals in the frequency range from 70 to 6000 MHz. The MT transceiver is a new generation device designed using the most modern element base and designed for use in modern measuring systems based on the open standards AXIe, VXI and LXI.
-
product
Digital Processor
DP7000
The DP 7000 Digital Processor with 40/100G Ethernet or 169G Interlaken protocol compatible MPO/MTP® Optics, designed for evolving markets such as Real-Time Stream Processing for High-speed Data-acquisition (DAQ), High Performance Computing (HPC), Machine Learning, Data Center Infrastructure, AI Processing and Network applications. The board is 8U form factor, 322.25 mm x 280 mm x 6 HP (L x W x H), single slot AXIe or AdvancedTCA® blade, ideal for multi-slot 19″ rack mount system integration. In AXIe form factor it provides up-to Gen3 PCIe® backplane connectivity.
-
product
AXIe M8000 Series of BER Testers
Simplified time-efficient testing is essential when you are developing next-generation computer, consumer, or communication devices. The Keysight M8000 Series is the highly integrated BER test solution for physical layer characterization, validation, and compliance testing. With support for a wide range of data rates and standards, the M8000 Series provides accurate, reliable results that accelerate your insight into the performance margins of high-speed digital devices.
-
product
640 Gb/s Digital Signal Processor
M8132A
The M8132A is a powerful digital signal processing module featuring two customers accessible Xilinx Ultrascale+ FPGAs, four optical data interfaces (ODI) running at up to 160 Gb/s in+out each, and a PCIe Gen3 x8 link to the AXIe backplane. In addition, the module provides a trigger input and output, synchronization input and outputs for deterministic latency between compatible digitizers and AWG modules as well as a 10-general purpose I/O pins. The M8132A is part of Keysight’s Wideband Solution Platform that consists of a portfolio of compatible instruments, including digitizer, arbitrary waveform generator, digital signal processor and storage modules.
-
product
High-Speed Digitizers and Multichannel DAQ Solutions
With our high-speed digitizers, we improve your measurement fidelity, signal integrity and measurement throughput, keeping low the total cost of ownership. The entire range includes PCIe, PXIe and AXIe form factors, configurable in single to multichannel solutions. Our products cover several applications in commercial OEM, aerospace & defense, wireless & RF communication and high-energy physics.
-
product
PCIe Cable: x8, 2.0 m
Y1202A
Use to connect a PXIe or AXIe chassis to a desktop or rackmount computer.
-
product
AXIe Chassis and Controllers
AXIe is a new open standard for high-performance, modular instrumentation, and incorporates the best features of other modular formats including VXIbus, LXI and PXI. Keysight has designed a new line of scalable chassis in this new format. Along with controller options, these new AXIe chassis will form the basis of a high-performance, AXIe-based test system.
-
product
Clock Generator Module
M8008A
The M8008A is designed as sample clock source for the M8199A 128/256 GSa/s Arbitrary Waveform Generator. It can also be used as a standalone low-jitter clock source for other applications. It comes as a 1-slot AXIe module, which allows the M8008A plus up to two M8199A AWG modules to be plugged into a single 5-slot AXIe chassis.
-
product
PCIe Cable: x1 To x8, 2.0m
Y1200B
Connect an M9502A/M9505A AXIe chassis or M9018A PXIe chassis with M9021A cable interface to a laptop computer
-
product
AXIe High-Performance 5-Slot Chassis
M9506A
5-slot AXIe chassis with embedded system module, Gen 3 performance, 300W per slot, and GPS option.
-
product
Rack Mount Kit For M9506A 5-slot Chassis
Y1227A
The Y1227A is a complete rack-mounting kit for the M9506A AXIe chassis. It includes rack flanges, handles, rails, and attachment hardware. This kit is not compatible with the M9505A AXIe chassis. Mounting the M9506A in non-Keysight racks may require different rack rails.
-
product
IPMI Controller & Software For AXIe, ATCA, And CPCI Serial Systems
IPMI-C-xx
The IPM Controller software is pre-programmed on a Freescale K10 microcontroller and provides all intelligent platform management interface (IPMI) functionality required by the VITA46.11, PICMG 3.0 and AXIe 1.0 specifications.
