Filter Results By:

Products

Applications

Manufacturers

Analyzers

examine data methodically by separating into parts and studying their interrelations.

See Also: Analyze, Analytics, Analysis


Showing results 2311 - 2325 of 3039 products found.

  • HIGH FREQUENCY DC BIAS

    6565 SERIES - Wayne Kerr Electronics, Ltd.

    The 6565 HF DC Bias Unit is intended to be used with a Wayne Kerr 6500 analyzer, either the 6500B Precision Impedance Analyzer or the 6500P HF LCR Meter. Its function is to provide a source of DC bias current through the Device Under Test (DUT) while the analyzer is making AC measurements. Each 6565 unit can provide up to 10 A of DC current, and up to six 6565 units can be connected in parallel to supply a maximum 60 A. A digital ammeter on the front panel allows the user to see the dc bias current value and an indicator LED shows when the bias current is enabled.

  • EMI Test Software

    ELEKTRA - Rohde & Schwarz GmbH & Co. KG

    The R&S®ELEKTRA EMI test software supports EMI measurements performed during development with EMI measuring receivers and spectrum analyzers from Rohde & Schwarz.

  • Low Phase Noise Reference Source

    96270A - Fluke Calibration

    The 96270A RF Reference Source is the simplest, most accurate and cost-effective single instrument for calibrating spectrum analyzers and RF power sensors and more, up to 27 GHz.

  • 75 Ohm Solutions

    Copper Mountain Technologies

    Vector Network Analyzer delivers lab grade performance in a compact package, with all the features engineers have come to expect included standard in our software.

  • NTDS Universal Breakout Box

    IXI Technology

    IXI’s Universal Tap Box is the effortless way to make connections to parallel NTDS interfaces. It is equipped with the most common military NTDS connectors as well as header connections for IXI NTDS products and commercially available logic analyzers. Military connectors on the tap box are keyed to accept one NTDS parallel input/output cable pair. Each cable has a separate 32-bit path through the box. NTDS signals entering the box from any connector set are available at all other connector sets, making it easy to transition from one connector type to another or to insert a breakout point for tapping the signals. It can be used in a powered or unpowered state. When powered, it provides the NTDS signals as differential outputs on the logical analyzer headers.

  • Lube Oil & Grease Tester

    MINISCAN IR LOG - Grabner Instruments

    The MINISCAN IR LOG is a highly versatile and extremely fast FTIR analyzer, designed for on-site condition monitoring of oils and greases. It is also capable of measuring low or high levels of water in oil accurately and quickly without using hazardous reagents. Cost SavingA condition monitoring apparatus is a hard-dollar saving investment, if the analyzer allows to check lube oil and grease quality directly on-site. It enables timely and accurate response to oil degradation. If oil and grease condition is not monitored continuously, additional costs are inevitable: the failure to predict oil degradation leads to engine-repair expenditures that can easily sum up to several hundred thousand dollars per year. An equal amount of costs can accumulate, if expensive oils and greases are changed too early.

  • Compact Calibration Kits for MSO & MSOT Calibrations

    Rosenberger Hochfrequenztechnik GmbH & Co. KG

    Rosenberger has expanded its wide range of compact calibration kits and provides a series of kits in common coaxial connector interfaces: RPC-2.92, RPC-3.50, RPC-N (50 O), RPC-N (75 O), 7-16, N, 4.3-10, and 4.1-9.5, each male and female. Compact calibration kits of Rosenberger combine all necessary calibration standards in one compact unit – small, easy to handle and light weight. The 3-in-1 calibration kits can be applied for complete MSO calibrations (open – short – load) of single port vector network analyzers, the 4-in-1 calibration kits can be used for complete MSOT calibrations (open – short – load - thru) of two or more port vector network analyzers. Rosenberger runs its own calibration laboratory accredited and controlled by the German accreditation body DAkkS (Deutsche Akkreditierungsstelle) – according to DIN EN 17025.

  • Broadband Diagnostics

    TruVizion - ZCorum

    TruVizion gives you a comprehensive view into the health of your cable or DSL network, including up to 90 days of historical data.PreEqualization Analyzer lets you quickly find upstream impairments like reverse splitters, loose or corroded connectors and bad wiring. Plus, you can be proactive and actually fix those problems before they affect service for your subscribers.RF Inspector is an inexpensive app that can do what a meter can do, except it can do it on a tablet from wherever you happen to have Internet access. That means in the office, at home, or in the field.Upstream Analyzer shows you the RF signals for all ports and modems on your Cisco CMTS without any additional equipment, cabling or connectors, and yes, you can see ingress under the carrier with one click.

  • Photometric Ozone Calibrator

    Model T703 - Teledyne Advanced Pollution Instrumentation

    The Model T703 is a microprocessor controlled ozone calibrator for precision gas analyzers. The Model T703 can deliver concentrations from 50 ppb to 5 ppm at flows from 1 LPM to 5 LPM.The Model T703 has two major components; the ozone generating device and the photometer. The ozone generator produces ozone by passing zero air over a UV lamp. Flow rate and lamp intensity are adjusted to deliver a specified ozone concentration by volume. The temperate and pressure compensated photometer, identical to that of the Model T400 ozone analyzer, provides feedback control of the UV lamp intensity, assuring stable ozone output. A nearly unlimited number of calibration sequences may be programmed into the non-volatile memory of the T703, covering time periods up to a year.

  • Trace-Level Photometric Ozone Calibrator

    Model T703U - Teledyne Advanced Pollution Instrumentation

    The Model T703U is a microprocessor controlled ozone calibrator for precision gas analyzers. Expanded ozone audit levels have created a need for precise ozone calibration well below the capabilities of standard calibrators. The Model T703U is designed to meet the requirements of ultra-low ozone production.In addition to a high range with similar performance to the Model T703, the Model T703U has the capability to generate ozone in a low range, or "fractional" mode, for producing ozone levels down to 3 ppb, with exceptional accuracy. Flow rate and lamp intensity are adjusted to deliver a specified ozone concentration by volume. The temperature and pressure compensated photometer, identical to that of the Model T400 ozone analyzer, provides feedback control of the UV lamp intensity, assuring stable ozone output. A nearly unlimited number of calibration sequences may be programmed into the non-volatile memory of the T703U, covering time periods up to a year.

  • Frequency Block Converter (FBC)

    Farran Technology Ltd

    Farran Technology offers the FBC series of down converters for use as frequency extenders for noise figure measurement test systems. The FBC-FB-XX is a fullband system can be built upon an Keysight N8975A Noise Figure Analyzer (NFA) or X Series Signal Analyzer with option N9069A.  This system allows the user to extend the frequency range of the NFA to allow for accurate noise figure measurements to be performed on a device covering Ka, U, V, E, W bands (26.5-170 GHz), when used with an Agilent E8247C signal generator (or equivalent).

  • Energized Testers

    ALL-TEST Pro, LLC

    Two complete instruments in one: Electric Signature Analyzer (ESA) and a Power Quality Analyzer (PQ)ESA mode evaluates the condition of incoming power, the control circuit, the motor itself, and the driven loadPQ mode used for energy data logging, harmonic analysis, voltage and current charting, viewing and capturing waveforms, including sags and swells, transient capture and event captureResults can be trended for condition based maintenance/predictive maintenance purposes

  • Interface Cards

    MIL-STD-1553 - Alta Data Technologies LLC

    Alta's MIL-STD-1553 (AS15531) product line is second to none. The product line includes multi-channel interface cards for most computer backplanes and the industry's only real-time Ethernet converters. The software development kits, AltaAPI and AltaAPI-LabVIEW(tm), provides the best designed, abstracted and portable resource to quickly and reliably integrate a 1553 network to your application. Also, the AltaView analyzer Windows software provides a low-level, network analyzer to greatly reduce integration and troubleshooting time.

  • IPTV Set-of-Box Auto Test System

    Jumho Electric Corporation

    IPTV Set-of-Box test system is general audio/video test system for IPTV RCA signal output. This system has these features: Based on high-speed, high resolution data acquisition board from National Instruments. It can support all video and audio parameters testing. High speed, 3x than traditional video analyzer and audio analyzer Cost down. Traditional video analyzer is expensive and difficult to adopt in factory pipeline Easy-of-use software interface

  • CPCI BUS Interface Card

    Cpci301 MIL-STD-1553 - Andor Design Corp.

    MIL-STD-1553 A, B & McAir MULTI PROTOCOLS Simulator / Analyzer / Tester CPCI BUS Interface Card - The CPCI301 can be used for Validation Testing, Production Testing, full bus simulation and monitoring, as a general purpose 1553 interface or a stand alone bus Analyzer. For precise message scheduling and measurements, the Major and minor frame times are independent of message sequences or retransmissions on errors and the start of all command messages are independent of message length, response time or length of response. Message timing is calibrated and RT responses have low jitter.