Filter Results By:

Products

Applications

Manufacturers

Analyzers

examine data methodically by separating into parts and studying their interrelations.

See Also: Analyze, Analytics, Analysis


Showing results 2536 - 2550 of 3039 products found.

  • Six 1 x 4 50 Ohm,RF Multiplexer

    E1472A - Keysight Technologies

    The Keysight E1472A 50 ohm RF Multiplexer is a C-size, 1-slot, register- based VXI module. It is the ideal choice to route test signals from your application to your test instruments (i.e., oscilloscope and spectrum, network, distortion analyzers, or other RF equipment). The E1472A is functionally identical to the E1474A except for output impedance.

  • Software

    DNA - Larson Davis, Inc.

    Data, Navigation and Analysis (DNA) Software: can be used to display and control measurement data on a PC in real time, while maintaining access to all of the instruments measurement and analysis functions it is interfacing with. The DNA software package was developed to integrate and support all types of a variety of measurements from Analyzers, Human Vibration Meters and Sound Level Meters.

  • Quad 1x4 50 Ohm 3 GHz Multiplexer Module for 34980A

    34941A - Keysight Technologies

    The Keysight 34941A RF multiplexer module for the 34980A Multifunction Switch/Measure Unit offers bi-directional switching for test signals from DC to 3 GHz. High channel isolation ensures quality dynamic range measurements with your oscilloscope, spectrum analyzer, or other instrumentation.

  • Protocol Analysis

    Utel Systems

    Test and verification of network elements, network services and network performance is important to ensure Quality of Service (QoS), network reliability, interoperability between network elements and user satisfaction. STINGA Protocol Analyzer is the ideal tool for ad-hoc network monitoring and analysis.

  • Specialized Extender Card Testing IP Modules

    IP-Debug-Bus - Dynamic Engineering

    IP-Debug-Bus is a specialized extender card which is optimized for testing IP Modules. The bus signals are all accessible via test points. The testpoints include multiple ground locations and .025 sq. posts for ease of connection to your logic analyzer or scope. The testpoints are labeled for easy identification

  • PROFIBUS Hub with Diagnostic slave device

    ProfiHub - PROCENTEC

    The Handyscope is a bus signal measuring instrument that can be used for PROFIBUS DP and PA measurements: signal amplitude, noise, peeks, DC voltage, etc. This instrument consists out of four parts: Multi meter, Oscilloscope, Spectrum analyzer, Transient recorder and an Arbitrary Waveform Generator.

  • SDI

    Sencore, Inc.

    Sencore offers a complete line of hardware- and software-based vectorscopes, wave form monitors, and audio/picture analyzers for comprehensive testing and measurement of serial digital video (SDI) signals. Sencore's wave form monitors provide measurement and monitoring of all HD, SD, and composite signals.

  • IEC61850 Intelligent Substation Test Solution PNS630

    PNS630 - Ponovo Power Co., Ltd.

    PNS630 portable analyzer was designed for smart substation maintenance.IEC61850-8-1(Goose),IEC61850-92, IEC60044-7/8 msssage can be monitored and analyzed, digital relay test function also equipped. SMV GOOSE message numerical and status analysis were realized and dispalyed visually by its numerical analyzing function.

  • AC Power Sources

    Compact iX Series - AMETEK VTI

    The Compact iX Series represents a new generation of AC/DC power sources that address the increasing demands on test equipment to perform additional functions at a lower cost. By combining a flexible AC/DC power source with a high performance power analyzer, the Compact iX Series is capable of handling complex applications that have traditionally required multiple systems.

  • EMI Test & Measurement Receiver

    DSI-600 - Dynamic Sciences International, Inc.

    The DSI-600 EMI Test & Measurement Receiver is a fully compliant and complete test system. The powerful integrated receiver technology provides the user with combined computational strength of the on-board computer, high speed data acquisition, enhanced spectrum analyzer display, and DSII’s EMI test software.

  • Shield Level / Pathloss Equipment

    SG1000B/PR1000A - Praxsym

    The SG1000 Signal Generator and PR1000A Preamplifier have been designed to simplify the measurement of shielding integrity in a shielded enclosure. When coupled with a high stability spectrum analyzer and an appropriate selection of test antennas, the SG1000/PR1000A combination can measure shielding effectiveness at all of the NSA 94-106 (supersedes NSA 65-6) defined test frequencies from 1 kHz to 10 GHz.The PR1000A amplifies the received signal from the test antenna and overcomes the high noise figure of the companion test receiver or spectrum analyzer. The PR1000A will ensure that the system noise figure will be less than 4.5 dB at all test frequencies from 1 kHz to 10 GHz. When used with a spectrum analyzer measurement bandwidth of 100 Hz, the system exhibits a sensitivity of -150 dBm at the test antenna output.​To overcome high cable loss between the test antenna and the PR1000A assembly at 10 GHz, a remote low noise pre-amplifier (Praxsym PN 310-010091-001) is mounted directly onto the 10 GHz antenna.

  • RF Power Amplifier Automatic Measurement System

    Acery Technologies

    RF power amplifier automatic measurement system consists of a new generation of science and technology is the German spectrum analyzer, RF and microwave signal source, network analyzers, noise figure analyzers, power meters, digital oscilloscopes, high performance DC power supplies, multimeter, low-frequency switching and digital I / O, custom RF and microwave switch matrix and other equipment and related equipment. These high-performance equipment not only provides incentives and analysis for the amplifier under test, but also provides a DC power supply and power amplifier circuit and other peripheral adjustment necessary. Meanwhile, the system sets the test signal conditioning, configuration and calibration test as one of the major parameters which can be accurately amplifier, fast and flexible testing. All equipment is controlled by the core of the test system software can be fully automated production test and manual type of R & D design type tested to meet the testing requirements of different stages. System software includes a convenient test mode conversion, simple and clear path and test switch interface, the main instrument soft front panel measuring device, and a measurement report in line with MS Word and Excel format and other functions.

  • group+ software (for B150x mainframe)

    EasyEXPERT - Keysight Technologies

    Keysight EasyEXPERT group+ GUI based characterization software is available for Keysight Precision Current-Voltage Analyzer Series. It is available on your PC or the B150xA's embedded Windows 7 platform with 15-inch touch screen to accelerate the characterization tasks. It supports efficient and repeatable device characterization in the entire characterization process from measurement setup and execution to analysis and data management either interactive manual operation or automation across a wafer in conjunction with a semiautomatic wafer prober. EasyEXPERT group+ makes it easy to perform complex device characterization immediately with the ready-to-use measurements (application tests) furnished, and allows you the option of storing test condition and measurement data automatically after each measurement in a unique built-in database (workspace), ensuring that valuable information is not lost and that measurements can be repeated at a later date. Keysight Precision Current-Voltage Analyzer Series provides the complete solution for device characterization with these versatile capabilities.

  • CLASS 2 MEASURING INSTRUMENT

    Bedrock SM30 - Bedrock Audio

    The Bedrock SM30, despite being our most basic model, is already packed with features and measurement modules. Moreover, its functionality is expended with the release of each new firmware update, at no charge. Class 2 / Type 2 sound level meter (fast, slow, A/C.Z-weighting, Leq) conforming to IEC-61672 class 2, ANSI S1.4 Type 2. Real Time Analyzer (1/3 and 1/1 octave)FFT analyzer (detailed frequency analysis up to 32768 lines). RT60 measuring (reverberation times: T20/T30/EDT). Calibrated audio recording. Leq long-term logging and averaging. Audio oscilloscope. USB audio device mode - calibrated audio for your PC-based software applications. More functionality will be added through free future firmware upgrades.

  • IC-CAP Wafer Professional Measurement Bundle

    W8511BP - Keysight Technologies

    The IC-CAP Wafer Professional (WaferPro) Measurement Bundle includes all the products needed to run automated DC/CV and RF measurements with WaferPro and the IC-CAP Platform. The bundle includes the IC-CAPW8501EP Software Environment, the LCRZ, DC and AC Measurement drivers and the W8510EP Wafer Professional Software Add-on license. The environment license enables access to the IC-CAP Platform basic features, such as the Programming Extraction Language (PEL), GPIB communications for switch matrix, probers and thermal chucks drivers and graphics. DC driversprovide access to all the DC Analyzers and Keysight Parametric Systems built-in drivers (e.g. E5270B, B1500A, 4156C, 407x and 408x Systems, etc.). LCRZ drivers provide support for different types of CV meters and Impedance Analyzers. Finally, the bundle also includes the W8510EP IC-CAP Wafer professional which enables users to organize and run automated on-wafer test plan.