Filter Results By:

Products

Applications

Manufacturers

Analyzers

examine data methodically by separating into parts and studying their interrelations. AKA: Analysers

See Also: Analyze, Analytics, Analysis


Showing results 2641 - 2655 of 3117 products found.

  • Trace-Level Dilution Calibrator

    Model T700U - Teledyne Advanced Pollution Instrumentation

    The Model T700U is a microprocessor based calibrator for precision, trace-level gas analyzers. Using highly accurate mass flow controllers combined with compressed sources of standard gases, calibration standards are provided for multipoint span and zero checks using up to 4 gas sources.In addition to the features of the Model T700, the Model T700U is designed for the demanding requirements of trace-level measurements. The ability to calibrate and verify linearity for NO2 at levels below 50 ppb is difficult with standard calibrators. To overcome this limitation, the Model T700U ozone generator operates in two modes; a high range with similar performance to the Model T700 ozone generator, and a low range, or "fractional" mode, for producing accurate ozone levels down to 3 ppb. To ensure the highest accuracy of NO2 output, the calibrator measures the ozone concentration prior to performing a GPT, and the range is selected automatically by the Model T700U based on ozone concentration and flow specified by the user.

  • Ethernet Tester

    ProPlex IQ - TMB

    Ethernet tester for entertainment production applications. Designed with input from production and staging professionals as an all-in-one device, it provides feedback and analysis on any Ethernet protocol, as well as network troubleshooting. It can act as a DMX cable tester, DMX receiver/transmitter, DMX timing analyzer, DMX recorder, RDM controller, or a bidirectional Ethernet-DMX gateway. It is also a PoE tester that can determine the capabilities of any connected PoE source. Finally, it can check SMPTE timecode or act as an LTC receiver/analyzer, and LTC transmitter, and users can use it to update Solaris/ProPlex firmware without a PC.

  • fA Leakage Switch Mainframe

    B2200A - Keysight Technologies

    The B2200A reduces the cost of test by enabling characterization tests to be automated, without compromising the measurement performance of the semiconductor parameter analyzer. It supports a 4-SMU, full-Kelvin configuration and a capacitance meter, with room for future expansion. Includes 14 inputs, each with a unique internal measurement path, and a distinctive capacitance measurement compensation feature for two of the inputs. Provides front panel control via keypad or optional light pen, and supports instruments such as pulse generators.

  • GbE Packet Capture, Filter, & Aggregation Tap

    PKV201 PacketShark™ - GL Communications Inc.

    Handheld hardware that can tap packet networks, capture Ethernet packets at wire speed, i.e., in optical or electrical interfaces up to 1 Gb/s and selectively filter the captured traffic based on specified criteria. Packets are transmitted through two ports and the packets that are traffic compliant with one of the filters is sent to a packet analyzer, such as GL's PacketScan for detail packet analysis. Firmware filters to identify traffic MAC, IP, UDP or TCP flow.

  • Gfast Certification Testing

    Telebyte, Inc.

    Complete solution for testing Gfast per the Broadband Forum’s ID-337 Gfast Certification Test Plan. Comprehensive solution designed for testing a set of functional, stability and performance test cases that focus on interoperability between CPEs and DPUs. It includes all the essentials - noise generators/injectors, Gfast-specific noises, digital analyzer, probes, test loops, Ethernet/IP traffic generator and Gfast test automation software. All components are designed to work together for minimal cable changes from test to test.

  • Gigabit Ethernet Test Module

    MPM 400 - VeEX Inc.

    The new MPM 400G test module plugs into the redesigned, 1U Multi-Protocol Analyzer (MPA) mainframe which accommodates up to 5 individual test modules. Equipped with a single CFP8 port, the module supports full bandwidth traffic generation, PCS and RS FEC layer analysis, CFP Health check, multi-lane unframed BERT and Service Disruption Time measurements. The advanced hardware has been designed to scale and accommodate FlexE, FlexO, OTN and related applications as standards evolve and new requirements emerge.

  • Full Function Electrical Safety Analyer

    MULTI-PRO 2000 - Netech Corp.

    The MULTI-PRO 2000, Electrical Safety Tester is a micro-processor based, full function electrical safety analyzer with a built-in 12 lead ECG Simulator. The combination instrument is designed to test the electrical safety of all types of medical equipment by hospital and field service biomedical technicians. In addition, the built-in ECG Simulator allows performance testing of ECG equipment.

  • EMI/EMC Measurements, Phase Noise, Physical Layer Test

    Keysight Technologies

    From precompliance measurements and EMC diagnostics to full compliance testing, Keysight has an EMI measurement solution for youPhase noise measurement solutions Offer flexible testing of VCOs, DROs, crystal oscillators, synthesizers, amplifiers, converters, and measurement of CW, pulsed and spurious signalsSignal Source Analyzer – offers the highest measurement throughput and best usability in characterizing VCO or other types of high frequency signal sources, as well as clock jitter evaluation in high-speed data communication systems.

  • EMI Test Receiver

    ESR - Rohde & Schwarz GmbH & Co. KG

    EMI test receiver and signal/spectrum analyzer combined in a single instrumentCompliant with CISPR 16-1-1 Ed. 3.1Preselection with integrated 20 dB preamplifierResolution bandwidths in line with CISPR and optionally in decade steps from 10 Hz to 1 MHz(MIL STD-461, DO-160)Ultrafast time domain scan (option) or conventional stepped frequency scanRealtime spectrum analysis with up to 40 MHz span for detailed investigation of disturbances (option)Time domain display with high resolution (50 μs)Automatic test routinesIF analysis (option)

  • Environmental Noise Monitoring Station

    SV 211 - SVANTEK Sp. z o.o.

    The major applications of this system are: periodical on-line noise monitoring, building construction site monitoring, acoustic map making, verification of the noise barrier efficiency. SV 211 is compatible with SVAN 97x instruments. The sound meter or analyzer is installed inside a waterproof case which is also equipped with a battery and controller. Controller ensures the correct work of complete system.

  • Network Monitoring

    Utel Systems

    Big data is awesome, you just need to catch it! With the Network Monitoring solution from Utel Systems you can maintain a superior network quality and a first class customer experience by capturing information about network traffic and Voice Quality in Mobile, IP and TDM networks. STINGA Monitoring Probe and STINGA Performance Analyzer let you detect and resolve network issues and poor performance before end customers are affected.

  • Noise Figure Measurement

    S8902A - Keysight Technologies

    The Keysight S8902A Noise Figure Measurement is the optional measurement library of the S8900A PA Test Solution for measuring the noise figure with the M9391/93A PXIe Vector Signal Analyzers or the M9421A VXT Vector Transceiver. By adding the S8902A to the PA test solution, you can seamlessly perform the noise figure measurement along with the measurements of PA test parameters. The S8902A enables a comprehensive test of RF frontend modules with integrated LNA.

  • OBD2 Auto Repair Intelligent Scanner

    Scan 1 - Automotive Diagnostics and Publishing

    The Scan 1 OBD2 scanner auto repair diagnostic tool is a unique software PC based scan tool, with built-in troubleshooter, PID Analyzer, DTC code videos, PID red-flag feature, advanced graphing, information and more. The PC based scanner software is bundled with all sorts of auto diagnostic and repair help. This OBD2 scan tool and your own oscilloscope makes for a complete auto repair shop solution. If you don't have an oscilloscope, then the Scope 1 is also available.

  • Multifunctional Meter

    CPM-70 - Chang Shuan Electronics Co., Ltd.

    CPM-70 multifunction power analyzer provide high accuracy single phase and three-phase energy measuring and displaying, energy accumulating, power quality analysis, data logging and data communication.CPM-70 series meters are able to measure bidirectional, four quadrants kWh and kVarh.It provides maximum/minimum records for power usage and power demand parameters. Hardware standard built in a RS485 Modbus communication port , 4 Digital inputs, 2 Relay outputs, LCM and 2 MB flash for data-logging.

  • Measurement Receiver

    DVB-T/T2 DVB-C/C2 - TestTree

    The most complete & compact (600g) RF measurement receiver and TS analyzer for DVB-T/T2 & DVB-C/C2: fromRF down to the Video. ReFeree II is your perfect tool for Drive Test Coverage: portable, compact and USB self-powered, it allows you to generate report files compliant with Google Earth (GNSS L1 magnet antenna included)