Filter Results By:

Products

Applications

Manufacturers

Analyzers

examine data methodically by separating into parts and studying their interrelations. AKA: Analysers

See Also: Analyze, Analytics, Analysis


Showing results 2686 - 2700 of 3123 products found.

  • Mobile sound Level Meter

    SoundMeter - Faber Acoustical, LLC

    SoundMeter turns your iOS device into a handheld sound level meter (SLM) with support for exponential-time-weighted sound level (Lp) and equivalent sound level (Leq) measurements with various time and frequency weightings. The built-in signal generator tool can be used for generating calibration test tones, noise, chirps, or other periodic signals. SoundMeter also offers additional tools via in-app purchase, including a Noise Dosimeter and a whole or 1/3-octave real-time analyzer.

  • Measurement Receiver

    DVB-T/T2 DVB-C/C2 - TestTree

    The most complete & compact (600g) RF measurement receiver and TS analyzer for DVB-T/T2 & DVB-C/C2: fromRF down to the Video. ReFeree II is your perfect tool for Drive Test Coverage: portable, compact and USB self-powered, it allows you to generate report files compliant with Google Earth (GNSS L1 magnet antenna included)

  • High-Frequency Probe, 300 kHz to 3 GHz

    85024A - Keysight Technologies

    85024A high-frequency probe makes it easy to perform in-circuit measurements. An input capacitance of only 0.7 pF shunted by 1 megohm of resistance permits high frequency probing without adversely loading the circuit under test. Excellent frequency response and unity gain guarantee high accuracy in swept measurements with this probe. High probe sensitivity and low distortion levels allow measurements to be made while taking advantage of the full dynamic range of RF analyzers.

  • Full Function Electrical Safety Analyer

    MULTI-PRO 2000 - Netech Corp.

    The MULTI-PRO 2000, Electrical Safety Tester is a micro-processor based, full function electrical safety analyzer with a built-in 12 lead ECG Simulator. The combination instrument is designed to test the electrical safety of all types of medical equipment by hospital and field service biomedical technicians. In addition, the built-in ECG Simulator allows performance testing of ECG equipment.

  • GbE Packet Capture, Filter, & Aggregation Tap

    PKV201 PacketShark™ - GL Communications Inc.

    Handheld hardware that can tap packet networks, capture Ethernet packets at wire speed, i.e., in optical or electrical interfaces up to 1 Gb/s and selectively filter the captured traffic based on specified criteria. Packets are transmitted through two ports and the packets that are traffic compliant with one of the filters is sent to a packet analyzer, such as GL's PacketScan for detail packet analysis. Firmware filters to identify traffic MAC, IP, UDP or TCP flow.

  • Gfast Certification Testing

    Telebyte, Inc.

    Complete solution for testing Gfast per the Broadband Forum’s ID-337 Gfast Certification Test Plan. Comprehensive solution designed for testing a set of functional, stability and performance test cases that focus on interoperability between CPEs and DPUs. It includes all the essentials - noise generators/injectors, Gfast-specific noises, digital analyzer, probes, test loops, Ethernet/IP traffic generator and Gfast test automation software. All components are designed to work together for minimal cable changes from test to test.

  • Gigabit Ethernet Test Module

    MPM 400 - VeEX Inc.

    The new MPM 400G test module plugs into the redesigned, 1U Multi-Protocol Analyzer (MPA) mainframe which accommodates up to 5 individual test modules. Equipped with a single CFP8 port, the module supports full bandwidth traffic generation, PCS and RS FEC layer analysis, CFP Health check, multi-lane unframed BERT and Service Disruption Time measurements. The advanced hardware has been designed to scale and accommodate FlexE, FlexO, OTN and related applications as standards evolve and new requirements emerge.

  • RF & Microwave Modules for 34980A

    Keysight Technologies

    The Keysight RF and Microwave multiplexer modules for the 34980A Multifunction Switch/Measure Unit offer broadband switching capabilities for switching from DC to 26.5 GHz. Use these modules to route test signals between your device under test and your signal generator, oscilloscope, spectrum analyzer, or other instrumentation. A switch/attenuator driver module also allows control of switches and attenuators external to the 34980A Mainframe.

  • RF / MW switch

    Acery Technologies

    The RF / MW switch includes a variety of RF and microwave switch modules - RF multiplexers, which are available for use in the 34980A multifunction switch / measurement unit, providing broadband switching from DC to 20GHz . Use these modules to route test signals between your device under test and a signal source, oscilloscope, spectrum analyzer, or other instrument. The switch / attenuator driver module also controls the external switches and attenuators of the 34980A.

  • RF Near Field Probe Set DC to 9GHz

    Aaronia AG

    EMF & RF close field sniffer-set for use with any Spectrum Analyzer or Measurement Receiver. The EMC Near Field probe set allows for straightforward pinpointing and measurement of interference sources in electronic component groups as well as execution and monitoring of generic EMC measurement. Our RF near field probe set is especially suitable for: - Pinpointing interference sources - Estimation of interference field strength - Verification of shielding and filtering measures - Identifying faulty components - Detecting circuitry overly sensitive to interference.

  • Serial Breakout Box Software

    TAL Technologies, Inc.

    Turn any PC or Laptop with two serial ports into a serial breakout box (serial line analyzer). Snoop in on data that is sent or received through an RS232 serial cable between any two devices or computers. This is an excellent tool for diagnosing serial communications problems as well as for figuring out what is being sent and received between two devices.

  • Rotating Machinery Analysis

    M+P International

    The Rotate software package is part of the m+p Analyzer Software for noise & vibration measurements and analysis. It provides a wide range of data acquisition and analysis tools for capturing and understanding noise and vibration induced in rotating and reciprocating machines by their motion. Fixed and variable speed machines are accommodated as are both structural vibration and condition monitoring diagnostics. Multiple tacho inputs can be processed for accurate speed tracking during analysis. Spectral mapping, order tracking, time history and orbit data analysis are all available.

  • QFN/MLF 3-in-1 Adapter System

    Interconnect Systems, Inc.

    The QFN/MLF 3-in-1 Adapter System ensures quick and easy configuring and interfacing to an in-circuit emulator, device programmer, logic analyzer or oscilloscope. The first of its kind, this 3-in-1 system provides the solution for test and design engineers needing QFN (Quad Flat Non-leaded) or MLF (Micro Lead Frame) signal access. This system supports the ATME tiny 26, tiny28, Mega 8, Mega 16 and Mega 32 8-bit AVR Microcontrollers. 

  • QFN/MLF 3-in-1 Adapter System

    Interconnect Systems, Inc.

    The QFN/MLF 3-in-1 Adapter System ensures quick and easy configuring and interfacing to an in-circuit emulator, device programmer, logic analyzer or oscilloscope. The first of its kind, this 3-in-1 system provides the solution for test and design engineers needing QFN (Quad Flat Non-leaded) or MLF (Micro Lead Frame) signal access. This system supports the ATMEL tiny 26, tiny28, Mega 8, Mega 16 and Mega 32 8-bit AVR Microcontrollers.

  • Satellite Signal Monitoring, Reference Solution

    Keysight Technologies

    The Keysight Satellite Signal Monitoring, Reference Solution is a fast, effective solution for monitoring large blocks of spectrum combined with precise digital modulation analysis to validate satellite signal integrity up to 50 GHz. Built upon a modular instrument format (PXIe), its attributes include: excellent instrument density, expandable multi-channel support, and high data bus speeds, ideal for multi-band monitoring. To provide flexibility, a choice of vector signal analyzers (M9391A and M9393A) is available to tailor the system frequency ranges as needed.