Filter Results By:

Products

Applications

Manufacturers

Analyzers

examine data methodically by separating into parts and studying their interrelations. AKA: Analysers

See Also: Analyze, Analytics, Analysis


Showing recent results 2791 - 2805 of 3193 products found.

  • Power Limiter, DC to 6 GHz, APC-7

    11930A - Keysight Technologies

    The Keysight 11930A limiter provides input protection for a variety of RF and microwave instrumentation. For example, the input circuits of network analyzers may be protected for inputs up to 6 watts peak or 3 watts average power using the Keysight 11930A.

  • Quad 1x4 50 Ohm 3 GHz Multiplexer Module for 34980A

    34941A - Keysight Technologies

    The Keysight 34941A RF multiplexer module for the 34980A Multifunction Switch/Measure Unit offers bi-directional switching for test signals from DC to 3 GHz. High channel isolation ensures quality dynamic range measurements with your oscilloscope, spectrum analyzer, or other instrumentation.

  • RF Streaming Solutions

    Bird Technologies

    Systems that can record spectrum from DC to 50 GHz with instantaneous bandwidths of up to 1 GHz. Bird's high-resolution long duration RF signal storage and re-creation capabilities can dramatically increase the power of your spectrum analyzers and vector signal generators from test & measurement industry leaders.

  • Adapter Kit, 3.5 mm to Type-N, DC to 18 GHz

    11878A - Keysight Technologies

    The Keysight 11878A adapter kit provides the RF components generally required when an SMA or 3.5 mm device needs to be measured with a network analyzer type-N configuration. This kit includes four type-N to 3.5 mm adapters for both male and female connectors.

  • CATV Pocket Calibrator & Return Band Signal Source

    PC-1 - Applied Instruments, Inc.

    The PC-1 is a compact, temperature-stable RF-carrier source. It is accurate enough to calibrate spectrum analyzers, signal level meters or any other receiving devices. When used with a signal level meter, the PC-1 CW test signal generator assists in measuring insertion loss of cable, amplifiers, splitters, and taps using the stimulus-response method.

  • Phase Noise Measurement Application

    N9068A - Keysight Technologies

    One-button measurements for analyzing phase noise in frequency domain (log plot) and time domain (spot frequency)Compatible with phase noise measurement personality in Keysight PSA and ESA spectrum analyzersRuns inside the PXA, MXA, EXA signal analyzers and MXE EMI receiver

  • Signal & Spectrum Monitoring

    SENTINEL™ - RT Logic

    The RF spectrum is becoming more complex and more densely utilized every day. RT Logic Telemetrix® Sentinel systems are at the forefront of the efforts to monitor, characterize, and mitigate the effects of signal interference, whether that interference is hostile or unintentional. Spectrum Monitoring; Interference Detection, Characterization, and Geolocation,; Network Management and Digital Spectrum Analyzer.

  • Bluetooth RF Integration Test System

    BRITS - Hyper Taiwan Technology Inc.

    The BRITS uses five configurable test architectures to categorize and speed up the test of the test cases sequentially. Each test-architecture typically contains a common PC server with self–designing software to control the tester, along with any additional commercial equipment such as spectrum analyzers or analogue/vector signal generators, and to execute the required test and measure the result.

  • Broadband Amplifier

    S5200 - Baytems

    The Baytems S5200 is a broadband amplifier with 20 dB of gain covering the nominal frequency range 9 kHz to 1 GHz. With its high gain and low noise figure, it will significantly increase the sensitivity of spectrum analyzers and other RF measuring instruments.

  • RF Power Amplifier Automatic Measurement System

    Acery Technologies

    RF power amplifier automatic measurement system consists of a new generation of science and technology is the German spectrum analyzer, RF and microwave signal source, network analyzers, noise figure analyzers, power meters, digital oscilloscopes, high performance DC power supplies, multimeter, low-frequency switching and digital I / O, custom RF and microwave switch matrix and other equipment and related equipment. These high-performance equipment not only provides incentives and analysis for the amplifier under test, but also provides a DC power supply and power amplifier circuit and other peripheral adjustment necessary. Meanwhile, the system sets the test signal conditioning, configuration and calibration test as one of the major parameters which can be accurately amplifier, fast and flexible testing. All equipment is controlled by the core of the test system software can be fully automated production test and manual type of R & D design type tested to meet the testing requirements of different stages. System software includes a convenient test mode conversion, simple and clear path and test switch interface, the main instrument soft front panel measuring device, and a measurement report in line with MS Word and Excel format and other functions.

  • Shield Level / Pathloss Equipment

    SG1000B/PR1000A - Praxsym

    The SG1000 Signal Generator and PR1000A Preamplifier have been designed to simplify the measurement of shielding integrity in a shielded enclosure. When coupled with a high stability spectrum analyzer and an appropriate selection of test antennas, the SG1000/PR1000A combination can measure shielding effectiveness at all of the NSA 94-106 (supersedes NSA 65-6) defined test frequencies from 1 kHz to 10 GHz.The PR1000A amplifies the received signal from the test antenna and overcomes the high noise figure of the companion test receiver or spectrum analyzer. The PR1000A will ensure that the system noise figure will be less than 4.5 dB at all test frequencies from 1 kHz to 10 GHz. When used with a spectrum analyzer measurement bandwidth of 100 Hz, the system exhibits a sensitivity of -150 dBm at the test antenna output.​To overcome high cable loss between the test antenna and the PR1000A assembly at 10 GHz, a remote low noise pre-amplifier (Praxsym PN 310-010091-001) is mounted directly onto the 10 GHz antenna.

  • IC-CAP Wafer Professional Measurement Bundle

    W8511BP - Keysight Technologies

    The IC-CAP Wafer Professional (WaferPro) Measurement Bundle includes all the products needed to run automated DC/CV and RF measurements with WaferPro and the IC-CAP Platform. The bundle includes the IC-CAPW8501EP Software Environment, the LCRZ, DC and AC Measurement drivers and the W8510EP Wafer Professional Software Add-on license. The environment license enables access to the IC-CAP Platform basic features, such as the Programming Extraction Language (PEL), GPIB communications for switch matrix, probers and thermal chucks drivers and graphics. DC driversprovide access to all the DC Analyzers and Keysight Parametric Systems built-in drivers (e.g. E5270B, B1500A, 4156C, 407x and 408x Systems, etc.). LCRZ drivers provide support for different types of CV meters and Impedance Analyzers. Finally, the bundle also includes the W8510EP IC-CAP Wafer professional which enables users to organize and run automated on-wafer test plan.

  • Preamplifiers

    LNA Series - Teseq AG

    Low noise amplifier with 12.5 dB of gain covering the nominal frequency range 1 MHz to 3 GHz and can be used in the range from 200 kHz to 4 GHz. With its high gain and low noise figure, it will significantly increase the sensitivity of virtually all spectrum analyzers and other RF measuring instruments. All measuring instruments have a 'noise figure', which is a measure of how good the instrument is at measuring low level signals, the lower this figure, the better, although the lowest signal level will still be governed by the measurement bandwidth. A typical spectrum analyzer may have a noise figure of 20 dB or more, whereas a typical receiver may have a noise figure of 10 dB. The preamplifier has a noise figure of typically 4 dB, significantly enhancing the low level performance of such instruments, enabling signals that were previously masked by noise to be seen.

  • CLASS 2 MEASURING INSTRUMENT

    Bedrock SM30 - Bedrock Audio

    The Bedrock SM30, despite being our most basic model, is already packed with features and measurement modules. Moreover, its functionality is expended with the release of each new firmware update, at no charge. Class 2 / Type 2 sound level meter (fast, slow, A/C.Z-weighting, Leq) conforming to IEC-61672 class 2, ANSI S1.4 Type 2. Real Time Analyzer (1/3 and 1/1 octave)FFT analyzer (detailed frequency analysis up to 32768 lines). RT60 measuring (reverberation times: T20/T30/EDT). Calibrated audio recording. Leq long-term logging and averaging. Audio oscilloscope. USB audio device mode - calibrated audio for your PC-based software applications. More functionality will be added through free future firmware upgrades.

  • B2961/62A 6.5 Digit Low Noise Power Source

    Keysight Technologies

    The Keysight B2961A/B2962A 6.5 Digit Low Noise Power Source are a new generation of power supply/sources offering 6.5 digit best-in class-precision, wide bipolar output ranges of 100nV-210A & 10fA-10.5A, and an extremely low noise floor of 10 Vrms and 1nVrms/Hz (at 10 kHz). It also offers innovative features such as graphing capability and arbitrary waveform generation capability (10 mHz-10 kHz), which enable tests and evaluation that conventional power supply/sources cannot do. These features make the B2961A/B2962A ideal companion sources to use with other instruments such as oscilloscopes, network analyzers, spectrum analyzers, frequency counters, digital multi meters, nano-voltmeters, etc. The advanced features of the B2961A/B2962A provide researchers, electronic development engineers and electronic technicians with the tools that they need to meet their most difficult measurement challenges.