Filter Results By:

Products

Applications

Manufacturers

Analyzers

examine data methodically by separating into parts and studying their interrelations. AKA: Analysers

See Also: Analyze, Analytics, Analysis


Showing results 1141 - 1155 of 3117 products found.

  • 3.2 GHz Spectrum Analyzer

    DSA832E - Rigol Technologies Inc.

    For design and development implementing Wi-Fi, Bluetooth, and other RF standards, the SSB Phase Noise down as low as -98 dBc/Hz at a 10 KHz offset empowers engineers to more accurately analyze modulations and noise surrounding their signals of interest. This becomes important for debugging and immunity testing of transceiver systems. The 7.5 GHz instrument enables engineers to investigate the 3rd harmonic of all of their critical 2.4 GHz applications while the 3.2 GHz models enable primary investigation of those signals as well as EMC measurements past the 3 GHz threshold. Additionally, resolution bandwidth settings down to 10 Hz means more precise visualization of low power RF signals. Whether you are still debugging your RF transceiver set, designing layout and configuration changes to maximize efficiency, or testing your system in noisy environments the DSA800 series spectrum analyzers will help you to quickly and easily identify and analyze your areas of concern.

  • PoE+ RackPack PowerSync Analyzer

    PSA-3248 - Sifos Technologies, Inc.

    • 48 Port Bundled PowerSync Analyzer – Reduced Cost / Port• Industry Leading IEEE 802.3at PoE PSE Conformance Suite• Unique, Fully Automated Multi-Port PSE System Analysis• Continuous 2-Pair PSE Loading > 47 Watts Per Port x 48 Ports• Continuous 4-Pair PSE Loading > 99 Watts Per Blade x 24 Ports• Hardware / Firmware Ready for IEEE 802.3bt PSE Testing• Replaces All General Purpose Test Equipment & Fixtures• Flexible Powered Device LLDP Emulation and LLDP Analysis• One-Button 2-Pair and 4-Pair PSE Waveform Analysis• Flexible and Accurate Measurements of Voltage, Current, Noise• Noise Immune Triggering, Transients, and Time Interval Measurements• Supports PSE Packet Transmission Testing with PoE Loads• Smart Fan Control – Runs Cool and Quiet• High Level Script Automation Supports High Speed PSE Testing

  • Sweep Frequency Response Analyzer

    SFRA 5000 - ISA Srl

    SFRA 5000 is a standalone sweep frequency response analyzer for the high accuracy transformer analysis and integrates the STS and TD 5000 family test sets. The SFRA 5000 offers both high precision and portability in a single package, providing all the accessories required for fast, easy to use, reliable and repeatable measurements. Without the need for a PC to compare transformer fingerprints, the SFRA 5000 decreases test time enabling the engineer to complete testing in a much shorter period of time than previously possible. SFRA 5000 is provided with its own embedded software, giving the possibility to the engineer to zoom into a portion of the sweep in order to inspect any differences in the plot in more detail during or after a sweep. This enables diagnosis of transformer faults early on in a transformer sweep, without the need for a PC.

  • Real-time Web Log Analyzer

    GoAccess - GoAccess

    GoAccess is an open source real-time web log analyzer and interactive viewer that runs in a terminal in *nix systems or through your browser. It provides fast and valuable HTTP statistics for system administrators that require a visual server report on the fly. The main idea behind GoAccess is being able to quickly analyze and view web server statistics in real time without needing to generate an HTML report (great if you want to do a quick analysis of your access log via SSH). Although it is possible to generate an HTML, JSON, CSV report, by default it outputs to a terminal. You can see it more of a monitor command tool than anything else. Or if you are simply concerned about third party analytics tools using JS trackers.

  • Trace VOC Analyzer

    PTR-TOF 6000 X2 - Ionicon Analytik Ges.m.b.H.

    The new PTR-TOF 6000 X2 is our premium PTR-TOF trace VOC analyzer. We conceived a unique system comprising of a novel high-resolution TOF and IONICON’s PTR technology with the new “X2” features, for the ultimate PTR-TOFMS experience. X2 combines the latest generation of performance enhancing tools incl. the ION-BOOSTER funnel as well as the hexapole ION-GUIDE. The ion funnel focuses the ions into the hexapole ion guide which results in nearly lossless transmission of an extremely focused ion beam into the TOF mass spectrometer. This increases the sensitivity dramatically and also improves the instrument’s mass resolving power. Utmost resolution, sensitivity and lowest real-time detection limit are now available in a robust, transportable platform that is smaller and lighter than previous products.

  • Vector Network Analyzer (VNA)

    TTR500 Series - Tektronix, Inc.

    Legendary support and quality meet ease-of-use and affordability. The Tektronix TTR500 Series 2-port, 2-path vector network analyzer is our latest breakthrough – an unmatched combination of measurement performance and convenience at 40% lower price than leading benchtop alternatives! Get the power to make everyday measurements with the accuracy and confidence you expect from Tektronix, without breaking your budget. The TTR500 Series rivals the leading benchtop competition, at 40% lower price! It delivers better RF performance on key parameters like dynamic range and includes a built-in Bias Tee you may have paid extra for in the past. The new TTR500 Series VNA gives you all the capability and performance you need in a 6 GHz 2-port VNA at a price you can afford. Why settle for less?

  • Industrial Process Gas Analyzer

    MAX300-RTG - Extrel CMS, LLC

    The MAX300-RTG uses cutting edge quadrupole mass spectrometer technology to deliver continuous online composition monitoring of industrial gas streams. Rapid, accurate gas analysis enables high-precision reactor control and increased production efficiency. Ithas the speed necessary to analyze the total composition of a sample in seconds, and can be fully automated to measure several points in a process or multipleproduction lines with a single analyzer.

  • Manometric Gas Sorption Analyzer

    IMI-FLOW - Hiden Isochema Ltd

    The IMI-FLOW combines the manometric gas sorption capabilities of all IMI analyzers with flowing mode operation and integrated mass spectrometry. Manometric mode offers high accuracy isotherm determination to 200 bar, while the flowing mode provides complete control of pressure, composition and flow rate. Integrated mass spectrometry allows downstream gas analysis for TPD and advanced methods.

  • CTEK Battery Analyzer

    56-925 - CTEK Power USA

    The CTEK BATTERY ANALYZER tests with high accuracy the condition of all types of 12V lead-acid batteries including Wet, Maintenance Free, Ca/Ca, Gel and AGM. Easy to use it provides fast, and easy to understand results. Operating voltage range is 8–15V with a test range of 200–1200EN. Simply connect the clamps to the battery and follow the step by step instructions on the display.

  • Model Vector Network Analyzer

    DZV-1 - Digital Signal Technology, Inc.

    DZV-1 is the vector network analyzer which can be measured the impedance and VSWR of the antenna, S Parameter of RF component and devices. It is small and low-priced. So, it is suitable for the production line, laboratory use, various testing applications, and the educational use. The communication between the DZV-1 unit and PC is done via USB, which is also used for power supply. The LOG-MAG characteristic, the phase-characteristic, the group delay frequency characteristics, the Smith chart, the polar coordinates, the SWR characteristic can be displayed on PC.

  • Software for PCIe Protocol Analyzers

    LinkExpert - Teledyne LeCroy

    LinkExpert provides complete control and management of Teledyne LeCroy's family of protocol analyzer and exerciser hardware while displaying high-level diagnostic information about communication between the root complex (i.e. host systems) and end-points (i.e. devices). Teledyne LeCroy continues to offer its industry favorite PCIe Protocol Analysis Software interface on its existing line of PCIe protocol analysis and test products. The new LinkExpert software interface targets design and validation engineers who are responsible for testing and resolving connectivity, interoperability and performance issues as well as ensuring conformance to the design specification. The new interface takes a smart approach to testing PCIe links and then displaying the results, including any identified errors, connectivity issues and/or overall performance metrics by using intelligent interpretations of bus traffic, eliminating the need for a deep technical knowledge of the various PCIe specifications. It provides easy-to-read information about five system-level test groups: Link establishment. Link maintenance. Link performance. Signal integrity. Power management.

  • Vector Network Analyzer

    ZNBT - Rohde & Schwarz GmbH & Co. KG

    Four-port R&S®ZNBT8 base unit, upgradeable to 8, 12, 16, 20 or 24 portsEight-port R&S®ZNBT20 base unit, upgradeable to 12, 16, 20 or 24 portsFrequency range from 9 kHz to 8.5 GHz (R&S®ZNBT8) or from 100 kHz to 20 GHz (R&S®ZNBT20)Up to 24 fully phase‑coherent receiversWide dynamic range of up to 140 dBShort sweep times, e.g. 2.1 ms (R&S®ZNBT8) and 2.5 ms (R&S®ZNBT20) for a sweep across 201 pointsWide power sweep range of 100 dBHigh power handling capacityIF bandwidths from 1 Hz to 10 MHzHigh temperature stability of 0.01 dB/°KMore than 100 traces and channelsSimple configuration of multiport measurementsManual and automatic calibration methods optimized for multiport applicationsStatus informationCompatible with all vector network analyzers from the R&S®ZVA/R&S®ZVT and R&S®ZNx families

  • 8k Multi-Channel Analyzer

    N957 - CAEN

    The Mod. N957 is a 8k Multi-Channel (MCA) with USB port, housed in a 1-unit wide standard NIM module. The multichannel analyzer performs the essential function of collecting the data and producing output, in the form of converted value of input peaks. The input pulses can be those produced by a standard spectroscopy amplifier. They can be Gaussian, semi-Gaussian or square waves, unipolar (positive) or bipolar, in a range from 0 to 10 V, with a rise time greater than 0.1 µs. The trigger can be made “on signal” (Auto Gate mode) or “external” (External Gate mode). In the first case a discriminator, with a settable threshold, enables the conversion. In the second case, an external gate is fed to the module, via front panel GATE In connector.The input channel has one peak amplitude stretcher, the output of which is digitised by a 13 bit fast (0.8 ms) ADC featuring a sliding scale technique, to improve the differential non-linearity.Converted waveforms are stored into a 64 KSamples buffer memory. The unit hosts an USB2.0 port (also compatible with USB 1.1), which permits a simple control and data-acquisition via PC.

  • Power Quality Analyzer

    MEWOI Electronics Co.,ltd

    Power quality analyzer is a product carefully developed by our company and specially designed for field test of three phases, multi-functional and intelligent, man-machine operation and concise and comprehensive test instrument. It is easy to use, large LCD screen display, high resolution, interface in both Chinese and English, shock-proof shell structure and so on. Can simultaneously measure the 4-channel current (ABC three phase and neutral wire current), 4-channel voltage (ABC three-phase voltage and neutral line voltage to ground), the peak value of current voltage, maximum/minimum value over a period, three-phase imbalance factor, short-time voltage flicker, transformer K factor, active power, reactive power, apparent power, power factor and displacement power factor, active power, reactive power, apparent power, total harmonic distortion and harmonic, etc; Display real-time waveform, harmonic ratio bar charts of current voltage; Dynamically capture instantaneous change of voltage current, monitoring starting current, monitoring the power parameters and generate the alarm list, generate the trend chart for a long time record test data.

  • Motor Drive Analyzers

    MDA800A Series - Teledyne LeCroy

    Motor Drive Analyzers provide complete three-phase power analysis from motor drive input through motor mechanical output, with results in a convenient Numeric table format. Motor speed, position, and torque integration are the most complete available. Long memory, per-cycle “synthesized” Waveforms and Zoom+Gate mode provide powerful dynamic drive and motor analysis. 8 analog input channels (MSO optional) with high resolution (12-bits), sample rate (up to 2.5 GS/s), bandwidth (up to 1 GHz) and memory (up to 250 Mpt/ch) provide unique capability to perform complete system debug on the motor drive power section, motor mechanical performance, and embedded drive control system operation.