Filter Results By:

Products

Applications

Manufacturers

Analyzers

examine data methodically by separating into parts and studying their interrelations. AKA: Analysers

See Also: Analyze, Analytics, Analysis


Showing recent results 1411 - 1425 of 3189 products found.

  • Ada Source Code Analyzer

    CodePeer - AdaCore Technologies, Inc.

    CodePeer is an Ada source code analyzer that detects run-time and logic errors. It assesses potential bugs before program execution, serving as an automated peer reviewer, helping to find errors efficiently and early in the development life-cycle. It can also be used to perform impact analysis when introducing changes to the existing code, as well as helping vulnerability analysis. Using control-flow, data-flow, and other advanced static analysis techniques, CodePeer detects errors that would otherwise only be found through labor-intensive debugging.

  • Device Current Waveform Analyzer

    CX3300 Series - Keysight Technologies

    The mainframes of CX3300 series of Device Current Waveform Analyzers captures measured current waveforms by the Current Sensors with a maximum of 200 MHz wide bandwidth and a maximum of 1 GSa/s fast sampling rate. The data acquisition is done by 14-bit or 16-bit by just selecting the "High Speed Mode" or "High Resolution Mode" from the front panel. To maintain the low noise current sensing capabilities of the Current Sensors, the mainframes are also designed to minimize the noise even under such wide measurement bandwidth.

  • Digital Circuit Breaker Analyzer

    CT-8000 S3 - Manta Test Systems

    The CT-8000 S3 is Vanguard’s fourth generation EHV circuit breaker analyzer. The CT-8000 S3 is available with 3 (part number 9103-UC) or 6 contact timing channels (part number 9104-UC). The CT-8000 S3 can fully analyze a circuit breaker’s performance by measuring the main contact and resistor contact time, stroke, velocity, over-travel, bounce back and contact wipes. Also, an outstanding feature of the CT-8000 S3 is the ability to perform dynamic resistance tests on circuit breaker contacts.

  • EHV Circuit Breaker Analyzer

    DigiTMR - Amperis sl

    he DigiTMR is an inexpensive, easy to use, stand-alone, microprocessor-controlled circuit-breaker analyzer. It can fully analyze a circuit-breaker's performance by testing the contact time, stroke, velocity, over-travel, and contact wipe. Contact-motion analysis can be performed for all breaker contact operations (Open, Close, Open – Close, Close – Open, and Open – Close – Open). The DigiTMR's timing window is selectable between 1-second, 10-second, or 20-second periods. The 10-second and 20-second timing windows are ideal for timing long duration events such as circuit-switcher contact testing.

  • Frequency Response Analyzer (FRA)

    CAPture - Captronic Systems Pvt Ltd

    A Frequency Response Analyzer (FRA) is a high precision measurement instrument used to analyse dynamic behavior of circuits & components of control systems in the frequency domain. An FRA generates a sinusoidal signal and inserted it into a unit under test. This signal is measured at the point of insertion using one of the input channels on the FRA The inserted signal travels through the UUT and the same signal is measured simultaneously by the FRA at other input channel. The technique measures the magnitude and phase relationship between output and input waveform as a function of frequency.

  • Handheld Oscilloscopes, Analyzers, Meters

    Keysight Technologies

    Keysight’s family of handheld and portable test tools is constantly growing. From digital multimeters (DMMs) and basic capacitance meters, to oscilloscopes, spectrum/signal and network analyzers, our handheld and portable test tools will address the test and measurement capabilities you need to complete your tasks – on the bench or in the field. Whatever your industry and application – electronics, electrical, installation and maintenance, wireless communications, aerospace and defense, or industrial process testing – we have a wide range of test tools for you.

  • PV Module Safety Analyzer

    EPV-500 - Extech Electronics Co, Ltd.

    The EPV-500 series is a comprehensive module safety analyzer that includes DC withstand, insulation resistance, DC ground bond, and potential induced degradation (PID), fulfilling all current solar panel safety standards: IEC 61730, IEC 61215, IEC 62804, and UL1703. Keeping pace with the current market trend in solar panel system voltage arrays that deliver up to 1,500 Vdc, it can perform Hipot tests outputting at 8,000 Vdc to meet the required safety regulations for large voltage arrays.

  • Circuit Breaker Analyzers & Timers

    IBEKO Power AB

    CAT circuit breaker analyzers and timers are advanced standalone or a PC controlled instruments for circuit breaker maintenance. Typical application areas of CAT instruments are medium and high voltage substations at electric power generation, transmission, and factories of switchgear. Also, industrial environments and electric power distribution are suitable application areas for these circuit breaker testing instruments.DV Power CAT circuit breaker testing instruments are portable and lightweight. They are designed for performing mechanical operations intended for circuit breakers testing according to standards IEC 62271-100 and IEEE C37.09.These instruments measure:the timing of main contacts, pre-insertion resistor contacts, auxiliary contacts operations,coil currents,motion parameters,voltage recording,main circuit resistance,arcing contacts wipe,and any relevant analog signal.Motion transducer channels provide measuring a displacement of the circuit breaker moving parts, contact wipe, over-travel, rebound, damping time, and average velocity. Even more, CAT circuit breaker analyzer optionally has a built-in micro-ohmmeter. Hence, it provides the main circuit resistance measurement and dynamic resistance measurement. Dynamic resistance measurement is an effective method for arcing contacts condition assessment.

  • EHV Circuit Breaker Analyzer

    DigiTMR S2 - Manta Test Systems

    The Vanguard DIGITMR S2 is an inexpensive, easy to use digital circuit breaker analyzer. The DIGITMR S2 can be operated stand-alone or can be computer-controlled. It can fully analyze a circuit-breaker’s performance by testing the contact time, stroke, velocity, over-travel, and contact wipe. Contact and motion analysis can be performed for all breaker contact operations (Open, Close, Open – Close, Close – Open, and Open – Close – Open). Timing results are recorded and displayed on the 240 x 128 pixels back-lit LCD screen and can also be printed on the built-in 4.5″ wide thermal printer.

  • Millimeter-Wave Accessories for Signal Analyzer

    Keysight Technologies

    As new wireless, communication, and defense technologies increasingly make use of wider bandwidths, traditional RF and microwave frequency bands are often too crowded with existing transmitters and interfering signals to accommodate these new wideband services. This has led designers to move to higher frequency bands, where there is less interference and that can support wide bandwidth signals. Keysight Technologies offers a wide selection of accessories to extend the frequency range of our signal analyzers, making it more convenient that ever to make accurate measurements at millimeter frequencies.

  • UFS / UniPro Exerciser / Analyzer

    Falcon G300/G350 - Protocol Insight

    The Falcon G300 series with Trace Validation provides complete protocol debug and analysis of UFS and UniPro devices. The G300 series supports MIPI M-PHY v3.1 HS-G3, UniPro v1.61, and UFS2.0/2.1, and is HS-G4 ready. It is available as an Analyzer or an Exerciser/Analyzer with the following features: Trace Validation™ provides complex state-machine analysis of protocol sequences and packet characteristics in captured traces. Event view window displays a comprehensive overview of all events on the bus, including fillers, trig packets, SOB and EOB packets, etc.

  • Distributed Polarization Crosstalk Analyzer

    PXA-1000 - General Photonics Corp.

    The PXA-1000 Distributed Polarization Crosstalk (X-Talk) Analyzer is an enhanced white light interferometer that measures space-resolved stress by analyzing stress-induced polarization cross-coupling along a length of polarization maintaining (PM) fiber. The patented design eliminates strong zero-order interference and reduces the multi-coupling interference common in traditional white light interferometers, both of which can cause “ghost” peaks in the measured signal. The removal of the “ghost” peaks enables the PXA-1000 to unambiguously identify the magnitudes and locations of actual x-talk peaks, resulting in higher measurement sensitivity, higher dynamic range, and higher spatial measurement accuracy.

  • PXI Vector Signal Analyzer

    PXIe-5668 - NI

    Up to 26.5 GHz PXI Vector Signal Analyzer—The PXIe‑5668 offers wide bandwidth with high-performance measurement performance and speed. It meets the challenging requirements of applications such as wireless communications, radio frequency integrated circuit characterization, RADAR test, and spectrum monitoring and signal intelligence. With its implementation as a PXI instrument, the PXIe‑5668 also features the fast measurement speed required for high-volume manufacturing test. The PXIe‑5668 includes a LabVIEW-programmable Xilinx Kintex‑7 FPGA that you can use to customize the instrument behavior by adding triggering, signal processing routines, and more.

  • WSS Optical Spectrum Analyzer

    CA9036 - UC Instruments, Corp.

    CA9036 laser sweep optical spectrum analyzer is special design for 1 X 9 50 GHz and 100 GHz WSS(wavelength select switch) components optical parmeters automatic testing. CA9036 can process insertion loss, ER, ripple, attenuation accuracy, port isolation, ITU center wavelength tolorance, PDL parmeter automatic testing. Build-in high speed, high accuracy sweep laser provides high accuracy lightsource and performance hig speed swept testing function. It also can process other passive components test and spectrum analyze.

  • Digital Circuit Breaker Analyzer

    CBT-7500 - Amperis sl

    The CT-6500 S2 is an inexpensive, easy to use, stand-alone, microprocessordriven EHV circuit-breaker analyzer. The CT-6500 S2 is available in models with either 3 (CT-6500-3 S2), 6 (CT-6500-6 S2), or 12 (CT-6500-12 S2) drycontact inputs. The CT-6500 S2 can fully analyze a circuit-breaker's performance by testing the contact time, stroke, velocity, over-travel, and contact wipe. Contact-motion analysis can be performed for all breaker contact operations (Open, Close, Open – Close, Close – Open, and Open – Close – Open). The CT-6500 S2's timing window is selectable between 1-second, 10-second, or 20- second periods.