Showing results: 1 - 15 of 58 items found.
-
SCHILLER AUTOMATION GmbH & Co. KG
The CFX supports CFexpress Spec (Ver 1.0), PCIe Gen4. The CFX Plug test adapter allows easy access via SMA connections, to measure or inject data signals. The user can also access +3.3V, its respective GND, Reset and other control lines via a low-speed 6-position connector.
-
-
CFD200 -
TEAM SOLUTIONS, INC.
The CFD200 is a new concept in test equipment that allows a PDA, laptop or tablet PC to be turned into a dual channel Digital MultiMeter with sophisticated analysis capabilities. SmartAnalysis software facilitates step-by-step fault investigation with instant display of results and an interactive diagnostic guide. With the CFD200 it is possible to integrate multiple measurement functions into a single hardware/software platform, providing high-level analysis features and a small, lightweight and portable unit. The CFD200 is an extended Compact Flash design offering two channels with full galvanic isolation to host and channel-to-channel. Each offers a scope function up to 40KSPS with full datalogging capability and 650V max. input voltage.
-
CF2PCE -
TEAM SOLUTIONS, INC.
The CF2PCE extender board allows PCMCIA cards to be used in Compact Flash Type I or II slots. Typically this extender is for use in a development or production environment. The extender routes all 50 CF signals via pin-headers for DSO or Logic Analyzer connection.
-
CF extend 162 -
Sycard Technology
In a high volume production environment a CF test 220 socket tester may see several thousand insertion/removal cycles a month. To prevent wear and tear on the CF test 220's 50-pin connector, Sycard supplies a low-cost socket saver, the CFextend 162. The CF extend 162 is inserted between the CompactFlash™ socket and the CF test 220 unit.
-
CF extend 182 -
Sycard Technology
The CF extend 182 is a low profile flexible extender card designed to physically extend the CompactFlash™ socket for easy access. Similar to Sycard's CF extend 180, the model 182 reduces the overall dimensions of the extender by using a single piece flexible circuit board. The lower profile allows for uses in many applications where the CF extend 180 was too bulky. The CF extend 182 extends the CompactFlash socket 5".
-
CF test 222 -
Sycard Technology
The CF test 222 socket tester provides a quick and easy way of verifying the operation of a CompactFlash™ host socket. Housed in a standard 3.3mm CompactFlash™ card, the CF test is fully self-contained. The CF test socket tester verifies all signals on the CompactFlash™ interface including accurate Vcc measurements.
-
CF test 220 -
Sycard Technology
The CF test 220 socket tester provides a quick and easy way of verifying the operation of a CompactFlash™ host socket. Housed in a standard 3.3mm CompactFlash™ card, the CF test is fully self-contained. The CF test socket tester verifies all signals on the CompactFlash™ interface including accurate Vcc measurements.
-
CF extend 180 -
Sycard Technology
The CF extend 180 is a flexible extender card designed to provide easy access to a CompactFlash™ card for debug or test. Designed with the same low noise characteristics of our CF extend 160, the CF Extend 180 takes this design a step further by connecting the host and card via ribbon cables. The flexible extender consists of two PC boards, the host interface board and the card interface board.
-
ADi-SA2X-CF -
ADLINK Technology Inc.
ADLINK‘s ADi-SA2X-CF all-in-one gaming platform features powerful processing and graphics performance for gaming infotainment and retail. Equipped with 7th Generation Intel® Core™ processors, the ADi-SA2X-CF provides compelling graphics performance from a PCI Express 3.0 x16 discrete graphics card and/or an embedded Intel® UHD Graphics 630 together with multi-display support for up to seven independent monitors. With the powerful processing performance, advanced security functions, smart middleware solutions, and versatile I/O array, the ADi-SA2X-CF fully satisfies the needs of your gaming application.
-
CF extend 180HIB -
Sycard Technology
For those applications that require access to the CompactFlash™ interface that can't use a standard extender card, Sycard provides the CF extend 180 HIB (Host Interface Board). The CF extend 180HIB allows full access to all 50-signal and power pins on the CompactFlash™ host. Standard 0.1" headers allow the user to connect standard 26-pin ribbon cables to test or prototype hardware.
-
CF extend 160B -
Sycard Technology
The CF extend model 160B is the ultimate CompactFlash™ extender card. It provides CompactFlash™ host and card developers a convenient way of accessing signals on the interface.
-
DLAP-3000-CF Series -
ADLINK Technology Inc.
ADLINK provides an optimized, highly-available computing platform with expandability options, including the MXM cards. The DLAP-3000-CF series platforms support performance-hungry workloads (e.g., deep learning) with active cooling for applications requiring very high levels of computing in a limited space. DLAP-3000-CF Series features: - Smallest Embedded GPU Platform (3 liters) - Reliable MXM GPU Design with Low TDP - Scalable Graphics Processing Ranging from Pascal to Turing GPUs
-
CF extend 180CIB -
Sycard Technology
For those applications that require access to a CompactFlash™ card that can't use a standard extender card, Sycard provides the CF extend 180CIB (Card Interface Board) which allows full access to all 50-signal and power pins on the CompactFlash™ peripheral. Standard 0.1" headers allow the user to connect standard 26-pin ribbon cables to test or prototype hardware.
-
CF extend 165 -
Sycard Technology
The CF extend 165 is a unique development tool for CompactFlash™ designs. It allows a standard 68-pin PC Card to be inserted into a 50-pin CompactFlash™ socket. Developers of CompactFlash™ products can now use a standard PC Card form factor as a starting point for new designs. While the 50-pin CompactFlash™ interfaces eliminates address lines A11-A25 and the Vpp programming pins, many current PC Cards may work under those conditions.