Showing results: 4096 - 4110 of 5237 items found.
-
National Technical Systems
The indirect effects of lightning are caused primarily by earth-voltage rises that occur when the flash dumps charge into the earth and by the intense electromagnetic field associated with the flash. These fields and earth-voltage rises have enough energy to cause component damage up to a kilometer or more from the actual strike. Indirect effects are most commonly induced into system interconnecting cables and may damage or upset electronic components.
-
HALT And HASS Testing -
TetraTek Products, Inc.
Our VibraTek TM Division manufactures precision machined, magnesium, and aluminum vibration fixtures with stainless steel and aluminum hardware. These fixtures feature TetraTek developed clamps, retainers, connectors, circuit boards, and cable sets to provide you with the ideal testing arrangement for your products while they are tested for HALT (Highly Accelerated Life Testing) and HASS (Highly Accelerated Stress Screening) response.
-
Chroma Systems Solutions, Inc.
The Chroma 16502 Milliohm Meter is Chroma’s newest digital Milliohm Meter. 0.001mΩ~1.9999MΩ wide measurement range. DC, Pulsed, and Dry-circuit test current driving modes, enable the Chroma 16502 can be properly used in DC resistance measurement for various inductive components (coil, choke, and transformer winding etc.), cable, metallic contact (connector, relay switch etc.) and conduction materials.
-
HTRH-W -
TEGAM Inc.
TEGAM''s high temperature solution for RH and temperature monitoring under high temperature conditions. The Humitran-T Series transmitters measure humidity levels from 3% to 95% RH and temperatures from -40F-356F (-40C-180C). Probes are constructed with stainless steel and Teflon cable. Model HTRH-W is a 2.5" long X .625" diameter probe supplied with a wall mounting bracket.
-
HTRH-D -
TEGAM Inc.
TEGAM''s high temperature solution for RH and temperature monitoring under high temperature conditions. The Humitran-T Series transmitters measure humidity levels from 3% to 95% RH and temperatures from -40F-356F (-40C-180C). Probes are constructed with stainless steel and Teflon cable. Model HTRH-W is a 2.5" long X .625" diameter probe supplied with a wall mounting bracket.
-
HydroPACT 440 -
Teledyne Marine TSS
The HydroPACT 440 pipe detection system has been established for a number of years as the industry standard, providing accurate and reliable survey data, which provides the position of conductive assets on or beneath the seabed. The system is flexible in its range of uses and can be installed on a variety of vehicles for undertaking survey work.It provides a reliable and simple method for performing accurate submarine surveys on a conductive target such as a cable or pipe.
-
AFL
Integrate FTTX activities into a small and compact wall mount enclosure, providing a safe space to splice, split, distribute, store, and cross-connect fiber optic. Mexfoserv® has a large variety of models available to fit our customers’ needs and specifications, ranging from size, amount of ports, moist and dust protection, indoor and outdoor models, different cable acceptance diameters, among others.
-
Extech Instruments Corporation
Multifunction Process Calibrator sources and measures Thermocouples (J, K, and T), mA, mV, and V devices. The 24V Loop Supply drives current loads up to 1000 ohms. Memory for 5 user settable output values of each type for fast calibrations. Single/continuous step function for Voltage and Current. Comes complete with six AA batteries and calibration cable with spade lug terminals.
-
CC-LRP3/4+KS+DS -
Hachmann Innovative Elektronik
With modules of CapaConnect series you can repair defective capacitive string parts of older installations, or retrofit string parts, where until now only direct cable taps are available. The connections to coupling dielectrics and earth can be carried out without an expensive dismantling normally, as the module contains all necessary components, like surge arresters, plug-in positions for adjustment capacities and high-quality contacts.
-
RY1 -
Shanghai Launch Electric Co., Ltd.
RY1 insulating oil dielectric loss testing electrode (also called oil cup) is used to precisely measure dielectric loss(tgδ), relative dielectric constant(εr)and DC resistivity for liquid insulating materials such as cable oil, transformer oil, capacitor oil, etc. The testing electrode is in line with IEC standards in structure and principle. It is inter-changeable with TETTEX2903 which is widely used in China.
-
RFA 600 -
Huber Signal Processing
The RFA 600 provides a gain of 20 dB, a highly linear frequency range with ±0.25 dB, a switchable 50 or 0 Ω output, and an output amplitude of 22 V. The frequency range now goes from DC up to 600 MHz. Typical Applications are radar, ultra sonic, ATE, VHF transmitter, data calbe drivers, HDTV cable drivers and many more.
-
Gambit Communications, Inc.
MIMIC Simulator creates a real world lab environment, with 100,000 devices, at a fraction of the cost of physical equipment. It provides an interactive hands-on lab for quality assurance, development, sales presentation, evaluation, deployment and training of enterprise management applications. Users create a customizable virtual environment populated with simulated routers, hubs, switches, WiFi/WiMAX/LTE devices, probes, cable modems, servers and workstations.
-
CRY445 -
CRYSOUND
CRY445 Accelerometer is an industrial-grade accelerometer. It is highly reliable and designed with a wide temperature range. It features internal shielding and floating isolation, making it suitable for applications in complex electromagnetic environments. It is commonly used for online monitoring of vibration status in industrial equipment. It can be used with armored shielded cables to measure vibration parameters such as acceleration, velocity, and displacement in strong interference conditions like industrial and power environments.
-
CRY443 -
CRYSOUND
CRY443 Accelerometer is an industrial-grade accelerometer. It is highly reliable and designed with a wide temperature range. It features internal shielding and floating isolation, making it suitable for applications in complex electromagnetic environments. It is commonly used for online monitoring of vibration status in industrial equipment. It can be used with armored shielded cables to measure vibration parameters such as acceleration, velocity, and displacement in strong interference conditions like industrial and power environments.
-
781687-01 -
NI
The TB-2630B provides the necessary routing to configure the PXI-2630B PXI Multiplexer Switch Module as a single, dual, or quad 1-, 2, or 4-wire multiplexer. You can directly connect the TB-2630B to the front panel I/O connectors of the PXI-2630B. The NI TB-2630B features ribbon cable headers to connect signals to the PXI Multiplexer Switch Module as well as screw terminals for trigger input and trigger output signals.