Filter Results By:
Products
Applications
Manufacturers
-
product
Type 39, VME64x, 4 Slots, 2U, 84HP, 298 Mm
284H2-X040-20PD6-100
VME64x System Type 39 with 4 Slots. 1x 200W pluggable, air-cooled with fan tray and powder coated. The system is for horizontal backplanes and have a 160mm card cage in the front and a 80mm rear I/O. Fan speed controlled by Elma‘s FanCon.
-
product
Type 39, CompactPSB, 6 Slots, FSR, 3U, 84HP, 298 Mm
384H2-P060-50PA1-100
CompactPSB System Type 39 with 6 Slots, System Slot on the left side of the system platform. 2x 250W pluggable, air-cooled with fan fix-mounted and powder coated. Horizontal backplanes and have a 160mm card cage in the front and a 80mm rear I/O.
-
product
Type 39, VITA 31.1, 8 Slots, 2x FSR, 4U, 84HP, 298mm
484H2-G080-75PA1-100
Vita31.1 System Type 39 with 8 Slots. 3x 250W pluggable, air-cooled with fan tray and powder coated. The system is for horizontal backplanes and have a 160mm card cage in the front and a 80mm rear I/O. Fan speed controlled by Elma‘s FanCon.
-
product
Type 39, VME64x, 6 Slots, Arbiter Slot 1, 3U, 84HP, 298mm
384H2-X06L-25PA1-100
VME64x System Type 39 with 6 Slots, Arbiter in Slot 1 of the system platform. 1x 250W pluggable, air-cooled with fan tray and powder coated. The system is for horizontal backplanes and have a 160mm card cage in the front and a 80mm rear I/O.
-
product
Type 39, VME64x, 8 Slots, Arbiter Slot 1, 4U, 84HP, 298mm
484H2-X080-75PA1-100
VME64x System Type 39 with 8 Slots, Arbiter in Slot 1 of the system platform. 3x 250W pluggable, air-cooled with fan tray and powder coated. The system is for horizontal backplanes and have a 160mm card cage in the front and a 80mm rear I/O.
-
product
Type 39, VME64x, 6 Slots, Arbiter In Slot 1, 3U, 84HP, 298mm
384H2-X060-50PA1-100
VME64x System Type 39 with 6 Slots, Arbiter in Slot 1 of the system platform. 1x 500W fix-mounted, air-cooled with fan fix-mounted and powder coated. The system is for horizontal backplanes and have a 160mm card cage in the front and a 80mm rear I/O.
-
product
3U cPCI Serial Dual-Port SFP+ 10Gbps Ethernet NIC
SN5-TOMBAK
The SN5-TOMBAK is a peripheral slot card for CompactPCI® Serial systems, with a dual port 10Gbps Ethernet controller. Both ports are available via SFP+ front bezel connectors for optical cables via SFP+ transceivers or SFP+ twinaxial copper cables.
-
product
Type 39, CompactPCI, 6 Slots, 3 U, 84 HP, 298 Mm
384H2-C06L-25PA1-100
CompactPCI System Type 39 with 6 Slots, System Slot on the left side of the system platform. 1x 250W pluggable, air-cooled with fan tray and powder coated. Horizontal backplanes and have a 160mm card cage in the front and a 80mm rear I/O.
-
product
Type 39, CompactPSB, 4 Slots, FSR, 2U, 84HP, 298 Mm
284H2-P04L-25PA1-100
CompactPSB System Type 39 with 4 Slots, System Slot on the left side of the system platform. 1x 250W pluggable, air-cooled with fan tray and powder coated. Horizontal backplanes and have a 160mm card cage in the front and a 80mm rear I/O.
-
product
Master-Slave Distributed Motion & I/O Master Controller
PCIe-7856
The PCIe-7856 is a PCI Express interface card providing two ports for Motionnet and HSL systems for distributed motion and I/O in machine automation applications. HSL technology allows thousands of I/O points to be scanned at the millisecond-level in real time by using a master-slave architecture.
-
product
PCI Express CONET2 Controller
A3818
The Mod. A3818(*) is a PCI Express x8 card that can plug into both x8 and x16 PC PCI Express slot (V2.0), which allows the control of up to 4 CONET2 independent networks (each network can be made of up to 8 CONET2 slaves).
-
product
Type 39, CompactPCI, 8 Slots, SSR (Top), 4U, 84HP, 298mm
484H2-C08R-75PD5-100
CompactPCI System Type 39 with 8 Slots, System Slot on the right side of the system platform. 3x 250W pluggable, air-cooled with fan tray and powder coated. Horizontal backplanes and have a 160mm card cage in the front and a 80mm rear I/O.
-
product
Type 39, CompactPCI, 10 Slots, SSL (Bottom), 5U, 84HP, 298mm
584H2-C10L-75PA1-500
CompactPCI System Type 39 with 10 Slots, System Slot on the left side of the system platform. 3x 250W pluggable, air-cooled with fan tray and powder coated. Horizontal backplanes and have a 160mm card cage in the front and a 80mm rear I/O.
-
product
Type 39, CompactPCI, 6 Slots, 3U, 84HP, 298mm
384H2-C06L-50PA1-100
CompactPCI System Type 39 with 6 Slots, System Slot on the left side of the system platform. 2x 250W pluggable, air-cooled with fan tray and powder coated. Horizontal backplanes and have a 160mm card cage in the front and a 80mm rear I/O.
-
product
Type 12, VME, 7 Slots, Arbiter Slot 1, 4U, 84HP, 375mm
484H6-V070-70FA1-000
VME System Type 12 with 7 Slots, Arbiter in Slot 1 of the system platform. 1x 700 fix-mounted, air-cooled with fan tray and colorless chromated. The system is for horizontal backplanes and have a 160mm card cage in the front and a 160mm rear I/O.
-
product
Type 12, VME, 12 Slots, Arbiter Slot 1, 7U, 84HP, 372mm
784V6-V120-65FA1-000
VME System Type 12 with 12 Slots, Arbiter in Slot 1 of the system platform. 1x 650W fix-mounted, air-cooled with fan tray and colorless chromated. The system is for vertical backplanes and have a 160mm card cage in the front and a 160mm rear I/O.
-
product
PCI High Density Screened MUX 49 Ch 2 Pole
50-670-021-S-49/2
The 50-670 series of very high density multiplexer cards feature a wide range of switching configurations. Typical applications include signal routing in ATE and data acquisition systems.The 50-670 shares exactly the same architecture as the established PXI 40-670 module.
-
product
3U OpenVPX Dual Drive Carrier, 5332-33
5332
Build a storage array with Elma’s 3U OpenVPX storage modules featuring high single slot data storage capacity. The 5332 & 5333 hold 2 on-board SATA drives and can be part of a multi-slot storage array with 5330/31 or 5335/36 controller cards.
-
product
75/150-Watt DC/DC Converter w/Holdup, 3U cPCI
75PS4
NAI’s 75PS4 is a DC/DC Converter that plugs directly into a standard 3U cPCI chassis with a 0.8” slot. It is conduction-cooled through the card edge/wedgelock. This programmable, switching power supply accepts a +28 VDC input and is available in either a 75 Watt or 150 Watt-version.
-
product
PMC Carrier/Adapter/Motherboard
PMC-MC-X2-RIO
PMC-MC-X2-RIO adapter, carrier, motherboard provides the ability to install up to 2 (two) PMC modules into a small enclosure. PMC-MC-X2-RIO has one PMC card positions top and bottom to create a compact arrangement with 2 PMC positions.
-
product
Compact Flash to PCMCIA Extender Board. (For Type I or Type II CF Slots)
CF2PCE
The CF2PCE extender board allows PCMCIA cards to be used in Compact Flash Type I or II slots. Typically this extender is for use in a development or production environment. The extender routes all 50 CF signals via pin-headers for DSO or Logic Analyzer connection.
-
product
Extender
3690-2
VECTOR Electronics and Technology, Inc.
Contact fingers at the other end of extender card are gold plated provides low insertion force and positive contact with printed circuit boards. Receptacles have double row phosphor bronze contacts with high quality, long life mounted on top of the extender.
-
product
Extender
3690-3
VECTOR Electronics and Technology, Inc.
Contact fingers at the other end of extender card are gold plated provides low insertion force and positive contact with printed circuit boards. Receptacles have double row phosphor bronze contacts with high quality, long life mounted on top of the extender.
-
product
Extender
3690-16
VECTOR Electronics and Technology, Inc.
Contact fingers at the other end of extender card are gold plated provides low insertion force and positive contact with printed circuit boards. Receptacles have double row phosphor bronze contacts with high quality, long life mounted on top of the extender.
-
product
Extender
3690-17
VECTOR Electronics and Technology, Inc.
Contact fingers at the other end of extender card are gold plated provides low insertion force and positive contact with printed circuit boards. Receptacles have double row phosphor bronze contacts with high quality, long life mounted on top of the extender.
-
product
Extender
3690-12
VECTOR Electronics and Technology, Inc.
Contact fingers at the other end of extender card are gold plated provides low insertion force and positive contact with printed circuit boards. Receptacles have double row phosphor bronze contacts with high quality, long life mounted on top of the extender.
-
product
Extender
3690
VECTOR Electronics and Technology, Inc.
Contact fingers at the other end of extender card are gold plated provides low insertion force and positive contact with printed circuit boards. Receptacles have double row phosphor bronze contacts with high quality, long life mounted on top of the extender.
-
product
Extender
3690-6
VECTOR Electronics and Technology, Inc.
Contact fingers at the other end of extender card are gold plated provides low insertion force and positive contact with printed circuit boards. Receptacles have double row phosphor bronze contacts with high quality, long life mounted on top of the extender.
-
product
Mainframe
Synergy 8
The Synergy 8 supports up to eight input modules in a compact, card modular form factor capable of 32 high-speed channels or 128 using the 16-channel high density module. System can be configured with a flexible carrying handle for either field or factory use.
-
product
Osprey PCI Qbus Adapter
9668
Dual-height card plugs into PDP-11 Qbus backplane. Fibrechannel cable plugs into Qbus logic connector on Osprey /TXP. I/O Adapter logic provides Programmed I/O and DMA access to "real" Qbus compatible controllers (those not otherwise emulated).