Showing results: 241 - 255 of 435 items found.
-
HMC8015 -
Rohde & Schwarz GmbH & Co. KG
The R&S®HMC8015 Power analyzer is a compact tester for AC/DC load and standby current characterization that enables measurements without additional tools such as a computer or remote infrastructure. In addition to a numerical and graphical display with 26 key parameters, the instrument delivers performance and compliance protocols in line with IEC 62301, EN 50564 and EN 61000-3-2.
-
MRC ltd.
Apparatus is used to determine the Heat Deflection Temperature or the Vi cat Softening Point. All the specimens are charged with a constant load and immersed in a bath, where temperature is increased at a standard velocity. The attained heat resistance rate of plastic materials is a widely required parameter for product characterization, for quality control, as well as for evaluating their conformity to the previewed applications.
-
34908A -
Keysight Technologies
Use the Keysight 34908A module for the 34970A/34972A Data Acquisition/Switch Unit for the greatest density in common-low applications, such as battery test, component characterization, and benchtop testing. Each module switches 40 one-wire inputs. All two-wire internal measurements except current are supported. The module low connection is isolated from earth and can float up to 300 V.
-
785283-01 -
NI
100 MVector/s, PXI Digital Pattern Instrument—The PXIe‑6570 is designed for semiconductor characterization and production test. It includes the Digital Pattern Editor for configuring pin maps, specifications, levels, timing, and patterns. The PXIe‑6570 also includes debugging tools like Shmoo, digital scope, and viewers for history RAM, pin states, and system status.
-
ELWIS -
Autoneum Holding AG
ELWIS (Evaluation of Light Weight Impedance System) offers a full and rapid characterization of porous materials based on the analysis of a single sample. The ELWIS system consists of the ELWIS-A and ELWIS-S components which can be used independently from each other although both applications are needed for a complete material simulation.ELWIS-A measures acoustic parameters that are needed to evaluate the acoustic performance of sound insulation and sound-absorbing multi-layer materials. An additional impedance tube for absorption measurements at higher frequencies is available for ELWIS-A.ELWIS-S measures structural parameters that are needed to simulate the dynamic and acoustic behavior of sound packages in the medium to low frequency range (including the "Poisson Ratio" for foam materials).ELWIS is very easy to operate: Thanks to its user-friendly software, the system can also be used to obtain reliable results by users with only limited experience in the characterization of porous materials.
-
GigaTest Labs
GigaTest Labs is a Keysight Technologies Solutions Partner, offering fully configured signal integrity measurement systems for high bandwidth signal integrity characterization. Our wealth of experience with Keysight's Vector Network Analyzer and Time Domain Resonance Oscilloscope tools will help you navigate and understand different instrument capabilities & configuration options that will benefit your engineering team.
-
JW3109 -
Shanghai Joinwit optoelectronic Tech,co.,Ltd
JW3109 optical light source can provide 1 to 4 output wavelengths to meet specific requirements, including the 650nm red source and the 1310/1550nm wavelengths for single mode fiber or the 850/1300nm wavelengths for multimode fiber, as well as other wavelengths according to customer needs. Together with the JW3208 optical power meter, it is a perfect solution for the fiber optic network characterization.
-
M8050A -
Keysight Technologies
The Keysight M8050A high-performance bit error ratio tester (BERT) enables accurate characterization of receivers used in next-generation data center networks and server interfaces. With uncompromised signal integrity, support for NRZ, PAM4, PAM6, and PAM8 signals, and data rates up to 120 GBd, the flexible architecture of the M8050A supports 1.6T pathfinding as well as other leading-edge technologies.
-
MET/TEMP II -
Fluke Calibration
MET/TEMP II software allows you to easily automate the calibration of a wide range of temperature sensors. It provides a comprehensive temperature calibration solution that allows you to test large quantities of sensors, calculate characterization coefficients, and print calibration reports. You can standardize comparison or fixed point calibrations and use multiple temperature sources or references in one test.
-
MagCam NV
The fully digital and compact measurement system connects to a computer via a single USB cable, making the measurement data directly digitally available. The Magcam maps are analyzed in real time by the MagScope measurement & analysis software and its optional add-on software modules, which provide powerful measurement and analysis capabilities for a complete quality control and characterization of permanent magnets and magnet assemblies.
-
Apex Technologies
The AP505xA series, high power ASE sources provide stable output power up to + 23dBm and broad flat spectrum over C+L band or T band. They enable effective and efficient measurements for component characterization or optical sensing. Finally, these products are proposed in friendly-user stand alone benchtop instrument with touch sensitive screen, GPIB, ethernet, RS-232 or USB controls.
-
VBAsuite -
WinTek s.a.s.
VBAsuite is the ideal portable tool for the acquisition and processing needs of noise and vibration signals. Thanks to the many options available, it can guarantee the realization of measurement campaigns for the characterization of rotating machines, for structural analysis, for acoustic analysis, without neglecting its qualities as a "general purpose" instrument dedicated to dynamic signal analysis. , being in fact equipped with the possibility of recording the acquired signal on mass memory.
-
ficonTEC Service GmbH
An important aspect of the development and manufacture of laser diodes is the so-called laser diode characterization, or laser IV curve. By applying increasing current to the laser diode so it that emits light, the optical output is measured together with the voltage drop across the diode element. The resulting LIV curve reveals important clues about the quality of manufacture and the performance of the laser diode, enabling a pass/fail decision to be met.
-
FTBx-5245/5255 -
EXFO Inc.
Robust In-service Pol-Mux OSNR for 100G/200G/400G (FTBx-5255). Industry’s only all-in-one OSA covering all applications: high speed (100G+ In-service OSNR, etc.), CWDM, O and L-band testing, etc.Portable solution for spectral characterization of DWDM/CWDM networks. Industry’s smallest OSA/transport solution in a single platform (FTB-4 Pro). Pol-Mux OSNR option compliant with IEC 61282-12 standard.
-
Muquans, SAS
This equipment is a stand-alone device that enables to coherently regenerate an optical signal allowing long-haul dissemination of an ultra-stable optical frequency reference. Its architecture is based on the heterodyne phase-locking of a narrow spectral width laser diode on the reference signal. The station is equipped with low phase noise optical interferometer that perform a thorough characterization of the phase noise accumulated by the incoming signal, and a compensation system of this phase noise.