Filter Results By:

Products

Applications

Manufacturers

Control

Known value


Showing results: 4351 - 4365 of 6972 items found.

  • High speed linear THz camera

    Terasense Group, Inc.

    High Speed Linear THz camera is our brand new product, which features both, unprecedented imaging speed of 5000 frames per second and ease of integration into any industrial process. Its ultrafast linear sensor array is built to satisfy the needs in Non- Destructive Testing (NDT) and Quality Control (QC) for many industrial applications employing high speed conveyors belts. This product fits most conveyors with a belt speed up to 15 m/s.

  • PDL Emulator

    PDLE-101 - General Photonics Corp.

    The PDLE-101 is specially designed for such PDL-related tests. This PDL source/ emulator can generate individual PDL values between 0 dB and 20 dB, with a resolution of 0.1 dB for PDL tolerance testing. It can also generate variable PDL with user defined range, waveform, and speed for PDL tracking speed and recovery time tests. The instrument can be controlled via the front panel keypad or by remote control via USB, RS-232, GPIB, or Ethernet interfaces. The residual PMD of the unit is less than 0.1 ps.

  • FDA/ICH Stability Rooms

    Darwin Chambers Company

    Darwin Chambers Company Stability Rooms offer superior environmental control for a wide variety of products needing a specific temperature and/or humidity conditions, Darwin Chambers is proven to exceed ICH/FDA stability requirements. For this reason, our FDA/ICH chambers are highly sought. Pharmaceutical shelf-life testing, accelerated stability studies, and testing and storage for cosmetics, animal health products, nutritional supplements, general products, medical devices, packaging materials are just a few applications we service.

  • Software

    CAD-to-Part Inspection - BuildIT Software & Solutions Ltd.

    Enables quick and easy dimensional verification of manufactured parts and assemblies for tool building, assembly, alignment, process automation, reverse engineering and quality control. BuildIT’s advanced analysis and reporting capabilities combine measurement data from multiple sources to produce detailed graphical and textual reports that are used to quickly identify manufacturing and production trends. With both numerical and graphical feedback of real-time deviations, BuildIT allows users to position parts with micrometer accuracy for high-precision assembly and alignment applications.

  • Gamma-Ray Analysis Software for HPGe Detectors

    GAMMA-W - Amptek Inc.

    Gamma-W software performs high-precision analysis of gamma-ray spectra from HPGe detectors, and is ideally combined with the PX5-HPGe and your high-purity germanium detector. It is noted for its accurate and reproducible analysis of small peaks even in the presence of high backgrounds. Gamma-W contains all of the options and algorithms legally required by many jurisdictions for quantitative analysis of HPGe gamma-ray spectra, including detection limit, radioactive decay control, uncertainties, documentation, etc…, and allows users to run samples from within the DPPMCA software.

  • Dissolution Rate Test Apparatus

    Kaypee Udyog

    Owing to perfection and quality oriented approach, we are offering Dissolution Rate Test Apparatus. The offered range is well equipped with motorized lifting to facilitate convenient functioning of the stirrers' assembly. To ensure quality, this is stringently tested on various parameters. Dissolution Rate Test Apparatus is used by quality control and R & D departments in pharmaceutical industry for carrying out test of tablets and capsules as per USP standards. Clients can avail this apparatus from us in different technical specifications, as per their needs.

  • 16 Channel Multievent QDC

    V792N - CAEN S.p.A.

    The Model V792N is a 1-unit wide VME 6U module housing 16 Charge-to-Digital Conversion channels with current integrating negative inputs (50 Ohm impedance). For each channel, the input charge is converted to a voltage level by a QAC (Charge to Amplitude Conversion) section. Input range is 0 ÷ 400 pC. The Model V792N features LEMO 00 connectors for both input and control signals. The outputs of the QAC sections are multiplexed and subsequently converted by two fast 12-bit ADCs.

  • High Temperature Operating Life

    7000 Series - Reltech Limited

    With ever decreasing geometries, the way we perform HTOL requires careful consideration. In lower geometry device leakage currents are not only higher but vary greatly. Temperature control at DUT level – required to achieve correct junction temperature at every DUT. For higher geometries, HTOL can be performed in a more traditional way but with devices consuming more power, the ambient temperatures required varies greatly. Multiple temperature zones are required – multi zones system or multiple smaller HTOL systems.

  • Burn Down Transformer

    ATG 2 - BAUR Prüf- und Messtechnik GmbH

    Cable fault location with the BAUR ATG 2. The ATG 2 burn down transformer is used for impedance reduction of cable faults in low- and medium-voltage networks. The short-circuit proof 2300 VA stray field transformer delivers a maximum voltage of 10 kV and is housed in a fully enclosed 19" housing.* Portable device for changing the fault resistance* Useful for cables that are difficult to access* Proven methods for complicated faults* Independent current and voltage control on each burning level

  • DS18B20 TO-92 Digital Thermometer Temperature IC Sensor

    604-00070 - Parallax Inc.

    The DS18B20 digital thermometer is a high-resolution (9-bit to 12-bit) Celsius temperature sensor with a built-in alarm and user-programmable alarm level. The sensor uses a 1-Wire bus that requires data, power and ground. Each sensor has a unique ID, allowing them to be configured and identified on the same bus. Distributed machines, buildings, and process control are common applications. This sensor was brought into Parallax inventory for use in the P2 Quick Byte series as a demonstration device for the 1-Wire Object. This part is easily wired into a breadboard, too.

  • Software

    ASYMTEK Fluidmove - Nordson Corporation

    Fluidmove software offers multiple layers of process controls and many different features for Nordson ASYMTEK's dispensing systems, including fiducial finding capabilities, Iterative Dummy Dot dispensing, and support for ASYMTEK's wide range of system options such as Tilt Dispensing, Auto Dual Simultaneous (ADS), Monocle™ Vision Package (MVP), and more. New enhancements for Fluidmove software are regularly being developed; sign up for the customer newsletter to be notified when new features are available.

  • System Integration

    Sri Comm Instruments Sdn Bhd

    The provision of a basket of services for Auditoriums such as audio-visual systems, stage lighting, stage rigging, building control systems, communication systems and information technology systems. A proper understanding of the various disciplines involved is the key to successfully integrating the diverse component parts. The final solution must perform as one unit with a high degree of simplicity to the end-user. The result will be a solution that, while extremely complex, appears simple, logical and easy to use. Sri Comm has successfully designed, installed and commissioned several projects of this nature.

  • XRF

    P Series - Bowman

    The P series offers the flexibility of measuring a wide variety of sample sizes, shapes, and quantities. It is equipped with a high precision programmable X-Y stage that offers several convenience factors over a fixed stage. Operators can use the mouse and software interface to move to desired measurement locations easily. Multi-point programs can be created to automatically measure multiple sample locations with the click of a button. Pinpoint control is achievable for testing critical areas. Larger sampling volumes are possible through multi-point programming.

  • PXI Strain Gauge Simulator Module 6-Channel, 1.5k

    40-265-406 - Pickering Interfaces Ltd.

    The 40-265 range consists of 6, 4 or 2 channel modules (this version is the 6-channel, 1.5kΩ) that simulate the operation of a range of strain gauges making it ideal for testing strain gauge meters and a wide variety of industrial control systems. The range provides a simple way of replacing in house developed sensors with a low cost simulator having excellent performance. The 40-265 uses the same resistor bridge techniques that real life strain gauges are based on, ensuring accurate emulation under all conditions.

  • PXI Strain Gauge Simulator Module 6-Channel, 3k

    40-265-106 - Pickering Interfaces Ltd.

    The 40-265 range consists of 6, 4 or 2 channel modules (this version is the 6-channel, 3kΩ) that simulate the operation of a range of strain gauges making it ideal for testing strain gauge meters and a wide variety of industrial control systems. The range provides a simple way of replacing in house developed sensors with a low cost simulator having excellent performance. The 40-265 uses the same resistor bridge techniques that real life strain gauges are based on, ensuring accurate emulation under all conditions.

Get Help