Filter Results By:

Products

Applications

Manufacturers

Control

Known value


Showing results: 4741 - 4755 of 6972 items found.

  • Vacuum Measurement

    Agilent Technologies

    Agilent's full range of active and passive vacuum gauges and gauge controllers from atmosphere to UHV/XHV allow you to precisely and reliably control and measure vacuum. We offer Thermocouple (TC), Bayard Alpert (BA), Pirani, Inverted Magnetron (IMG), and Hot Filament (HFIG) gauges. Our gauge controllers are compatible with both Agilent and competitors' gauges and can handle up to 12 channels. Agilent controllers come with several communication interfaces including Profibus, ethernet, and RS-232/485 (other interfaces may be available upon request). There is also the option of a portable gauge controller (HGC-536).

  • Power IP

    SystematIC

    An IC development is never a reproduction of a previous IC, however there is no need to invent the wheel twice.Considering our extensive IC design experience in the domain of power control we will likely find existing IP blocks to speed up a new IC development. We gladly evaluate if and how our IP can be succesfully reused or applied in your next IC development, and focus on achieving your essential IC requirements in a shorter development time.Our experience includes the following elements which have been developed in a diversity of technologies, from standard CMOS process (mostly 180nm) to 350nm 700V CMOS.

  • Strain Sensors

    Columbia Research Laboratories

    Columbia's foil strain sensors monitor the fatigue loading experienced by tactical aircraft under various conditions of speed, weight and missions configuration. Critical undercarriage structures and control surfaces may be monitored for fatigue damage induced by high-G maneuvers and high stress landings. These sensors are self-temperatures compensating, environmental resistant, have a high output, two active arms and are easily installed. Developed for the demanding requirements associated with tactical military aircraft, they are equally useful performing many of the more common strain measurements encountered in the material testing laboratory. Columbia's foil strain sensors are considered the standard for the industry.

  • Kestrel /SX Co-Processor

    0149-SX - Strobe Data Inc.

    Same speed Windows/NT Kestrel Co-Processor for equivalent system throughput, or more. Occupies one PCI slot. A writable control store, FPGA implementation of the HP1000 architecture with 4 MBytes of tightly coupled, zero wait-state memory. Includes compatible hardware floating point. On-card x86 microprocessor rapidly processes "virtual" I/O instructions. PCI bus speeds increase disk throughput by at least a factor of ten. HP1000 Bus support logic for non-emulated devices is provided on-board with connector to wide bandwidth fibrechannel adapter. Operates only under Windows/NT. WNT Support license included.

  • IEEE 1394b/AS5643 Mil1394 (FireWire), Triple-Node Multi-Port, Communications

    FW3 - North Atlantic Industries

    The FW3 function module provides IEEE 1394b/AS5643 (Mil1394) support on each of its three nodes, which are configured as 2 nodes with 3-ports and 1 node with 2-ports. AS5643 defined flight ready robustness and active transformer isolation to enable longer cable lengths (20 meter) between nodes. Together these standards provide the deterministic and redundant communications protocol required for Vehicle System (Flight Control) Networks. The FW3 multiple ports per node configuration allows the user to create tree, daisy-chain and looped topologies needed to optimize cable length and weight while creating redundancy.

  • Standard Tests

    LXinstruments GmbH

    The following list contains only the most important standards and does not claim to be complete.EN 60204-1 Electrical equipment of machinesEN 60335-1 Electrical appliances for household and similar useEN 50106 Sampling test, routine tests (in conjunction with EN 60335-1)EN 60598-1 LuminariesEN 60601-1 Medical electrical equipmentEN 60730-1 Automatic electrical controlsEN 61010-1 Measuring, control and laboratory equipmentEN 61439-1 Switch cabinet and switchgearEN 62368-1 Equipment for audio/video, information and communication technologyEN 62841-1 Hand-held electric toolsEN 50191 Erection and operation of stationary and non-stationary electrical test equipmentLVD Low V oltage D irective _

  • CE Mark Testing Lab

    F-Squared Laboratories

    The CE mark is a mandatory European marking for certain product groups to indicate conformity with the essential requirements set out in European Directives. In order to use the CE mark on a product, the manufacturer must draw up an EU declaration of conformity (DoC) in which the manufacturer attests to conformity with all relevant New Approach Directives (NADs) and takes sole legal responsibility. In some instances, a NAD may require a Notified Body to issue a Certificate of EU declaration of conformity (DoC) Conformity in order to verify the performance of the product or constancy of the production process (Factory Production Control, for example).

  • Torque Screwdrivers

    Mountz Inc.

    From better product quality to a lower total cost of ownership to guaranteed regulatory compliance, you can have it all with market leading Mountz torque screwdrivers. Built-in cam-over mechanisms prevent over and under-torque conditions so you can count on the quality of your work. Assembly and repairs performed with Mountz torque screwdrivers allows any user to deliver precision torque control with confidence regardless of task and operator skill level. And when it's time for compliance inspections or audits, equipment calibration records provide clear documentation. In short, Mountz torque screwdrivers keep your operation tight.

  • 35/50 GHz 2/4 Port TDR/TDT Remote Sampling Head for the 86100D DCA-X

    N1055A - Keysight Technologies

    Bandwidth options: 35 or 50 GHz (upgradable)Edge speed (10-90%, typical): 18 ps (35 GHz) or 7 ps (50 GHz)Channel options: 2 or 4 per module (upgradable) with independent skew control and up to 16 channels per 86100D mainframe Ultra-thin remote head: 1.6 m phase-stable cable, 2.92 mm (35 GHz) or 1.85 mm (50 GHz) connectors, and integrated 67 GHz diode limiters for ESD/EOS protection TDR fixture de-embedding removes effects of fixtures, cables or probes connected between remote heads and DUT

  • 2-Channel 400MHz DDS Signal Generator

    2940A - Novatech Instruments , Inc.

    The 2940A is a two-channel 400MHz DDS Signal Generator that generates two independent sine wave output frequencies simultaneously from 200kHz to 400MHz in 1Hz steps. A Clock Generator configuration with ECL or LVDS clock outputs is also available. The 2940A is lockable to an external frequency standard or is used with its internal TCXO. Optional internal amplifiers and 60dB step attentators available. Set all parameters with front panel controls and LCD display or by computer using the RS232 serial interface. All settings can be saved into non-volatile EEPROM memory upon power down. Windows software included.

  • MTM-Relay: 4-Channel Solid-State Relay (SSR) Module

    Acroname, Inc

    SOLID STATE: The MTM-Relay is a key component to automated manufacturing test systems that require switching of industrial control voltages. Features four software-controlled solid-state relays (SSR) that can handle up to 60V and 6ADC/RMS.

  • Machine Vision Systems

    BCO, Inc.

    BCO uses National Instruments hardware and software tools for image acquisition and processing to address applications such as quality and process control, automated testing for semiconductor, automotive and electronics, intelligent monitoring, and medical imaging.

  • 3-48V Auto Tester

    1960A - Peaceful Thriving Enterprise Co Ltd

    Check on 3-48V systems. Especially suitable for the control of electrical and electronic parts of motor vehicles, for the fault finding on components. The tester is connected with a banana plug adapter, including a testing probe and an alligator clip.

  • Metal Detector

    Dor Yang precision instrument (Shanghai) Co.,Ltd

    1.Fully Automatic and All Metal Detectors - Your detector detects all kinds of metal objects. Unless you have set for some objects that you don’t want to detect.2.LCD – The LCD with light, it improve to identify the metal in night or caliginous outside. 3.Target Identity - The detected objects are shown on the LCD display. You can decide immediately if the objects worth to be recovered.4.Unwanted Target Elimination - You can set the detector not to respond to some objects.5.Unique Tone for Target - You don’t have to keep watching the LCD display, when an object is being detected, an unique tone corresponding to a target will generate. You may even searching when there is little or no light.6.No Clumsy Slack Cable - hidden search coil cable (connecting between control unit and search coil) avoid entangling and for ease of stem length adjustment.7.Headphone Jack - provided for headphone connection. Both stereo or mono headphone can be used.8.Volume Control - for adjusting the output volume to the loud speaker or headphone.9.Batteries Condition Indicator - shows the conditions of the batteries in the battery compartment.10.Waterproof Search Coil - lets you use the detector in the shallow water.11.Adjustable Stem - lets you adjust the detector’s length for comfortable use. The micro-plug that connects the search coil and the controller unit is made of metal which makes the plug more reliable.

  • Traffic Rank, Link Popularity tracking software

    SEO Altimeter - CleverStat

    Search engines have become one of the most important sources of a targeted, easily convertible traffic. More and more Internet users seeking for a product or service simply type the query in search engine's box and open the website shown in results. Thus, it is important to feel the pulse of your website, to see how well it is ranked and therefore how much profit it can make for you. However, the task is not as easy as it may seem. You need to constantly monitor dozens of different parameters: website ranking, link popularity, traffic rank and so on and so further. Moreover, it is not enough to control your own website trends only — you should also monitor your competitors in order to be able to response on their marketing efforts and stay ahead of them.Fortunately, you have the tool to do this tremendous work for you. SEO Altimeter is specially designed software tool to control all crucial internet marketing parameters including Alexa traffic rank, Google PageRank, overall link popularity in many search engines all over the world and many other vital info.SEO Altimeter performs all the work for you in an easy, user-friendly way. It automatically checks all the vital parameters (the process is customizable), saves the trends and the history and provides a way to export all the data into CSV for further analysis.

Get Help