Showing results: 226 - 240 of 310 items found.
-
Sig-Station Series -
Signatec
Sig-Stations are high-performance PC workstations designed specifically for integrating Signatec/GaGe advanced data acquisition instruments and maximizing their operational performance. The dedicated peer design of host PCIe buses ensure that the maximum data transfer rate is achieved for multiple Signatec/GaGe instrument card operations. Integrated high-speed data storage is specifically tailored for real-time data streaming signal recording applications that require a guaranteed continuous transfer rate with no missing data. Sustained data transfer rates and storage capacity are scalable. Sig-Station systems come with all Signatec/GaGe cards, features, and software fully tested and installed so that the user can be up and running with their system solution right out of the box. Custom system configurations can also be defined to meet specific customer applications or requirements.
-
Xcelera-CL+ PX8 Full -
Teledyne DALSA
The X64 Xcelera-CL+ PX8 Full has been built within Teledyne DALSA’s Trigger-to-Image Reliability technology framework. Trigger-to-Image Reliability leverages Teledyne DALSA’s hardware and software innovations to control, monitor and correct the image acquisition process from the time that an external trigger event occurs to the moment the data is sent to the host, providing traceability when errors do occur and permitting recovery from those errors.
-
Atec, Inc.
Atec has experience with rugged and reliable equipment required for oil-field applications and the reputation for customer responsiveness and quick deliveries. Our energy history includes several years of re-engineering and manufacturing several test and support energy products. We have the ability to design, re-engineer and assemble items such as: junction boxes, cables, harnesses, printed circuit boards, computer systems, data acquisition software, valves, solenoids, & gear boxes.
-
M+P International
m+p Coda is a full-featured turnkey software platform for data acquisition, signal analysis and monitoring. Complete turnkey operation provides quicker time to test by eliminating costly application programming and long learning curves. The extensive built-in features and tools offer a functionality that was previously available only in custom packages. The intuitive graphical user interface facilitates set-up, operation and analysis, thus leading to precise, repeatable results quickly.
-
PSE Instruments GmbH
The potential induced degradation (PID) is addressed with the standard IEC TS 62804-1. The standard defines two methods that enable analyzing occurring PID effects in a specific PV module type. PSE AG offers the necessary equipment for the test in a climate chamber. The test equipment can work with any climate chamber on the market and is delivered turnkey. It comes with all necessary equipment, high voltage power sources, sensors, data acquisition and software.
-
Concerto -
The Phased Array Company
Concerto is a UT acquisition and analysis software specially designed for Phased Array corrosion mapping. For the tough field conditions that operators deal with Concerto features no menu, less than 18 icons, and few controls so that operators can easily work and not be bothered by complex GUIs. Concerto is simple and easy to work with yet WT, Surface, and back wall C-scan can still be analyzed and setting can be changed using the same acquired data.
-
AMETEK VTI Instruments
The EX1200 family is the highest density switch and data acquisition instrument on the market with the ability to mix low-level, power, and RF switch modules in a single mainframe. This scalable family of products is designed to leverage capital investments in one common hardware and software platform that can be used in development, manufacturing, and field service. Mix and match a variety of modules to build a comprehensive signal switching subsystem that can be supplemented with precision analog and digital I/O modules.
-
XCP-Gateway -
CSM Products, Inc.
XCP-Gateway is the interface between the data acquisition software (e. g. vMeasure, CANape®, INCA®, Vision® ...) and the EtherCAT® measurement modules from CSM. It includes an EtherCAT® master and an XCP-on-Ethernet slave. CSM developed the XCP-Gateway for the ECAT MiniModule series and for measurement applications with many measurement channels and high measurement data rates. What's more, the XCP-Gateway features two CAN interfaces, thus providing a basis for combined measurement setups with CAN- and EtherCAT®-based measurement modules from CSM.
-
CRY2301 -
CRYSOUND
CRY2301 Noise sensor is a new type of noise test equipment independently developed by CRY Sound for industrial grade applications. It can realize real-time noise time domain and frequency domain analysis with real-time spectrum analysis software. The product complies with such standards as IEC61672 (Class 1) and GB/T3785 (Class 1). CRY2301 integrates measurement microphone, preamplifier, data acquisition, and data communication in a compact structure. It supports an optional 1'' high-sensitivity microphone for extremely low sound pressure testing. CRY2301 uses a USB interface for data communication and power supply. As a composite USB device consisting of a USB Audio device and a HID device, it is compatible with 32-bit/64-bit Windows 7 and Windows 10 systems. CRY2301 is equipped with real-time spectrum analysis software for easy access to time and frequency domain measurements. The real-time spectrum analysis software supports frequency weighting and time weighting, and can perform acoustic analysis, such as noise statistical analysis, octave analysis, and FFT analysis.
-
RogaDAQ16 -
ROGA-Instruments
With the introduction of the RogaDAQ16 USB 2.0 data acquisition system, a new age of measurement technology begins.*USB 2.0 / 480MBIT (USB1.1/12MBIT COMPATIBLE)*16 analog input channels (16bit/500kHz max.)*ICP ® ( IEPE ) sensor supply (24V/4mA)*0.125V to 10V input range*Individual preamplifiers*4 analog output channels (16bit/100kHz)*Powerful DSP (255MIPS) for filtering, control etc.*24 digital I/Os*Optional 24bit counter, timer, PWM, incremental encoder*Free drivers for major application software*including DASYLab; LabView & DiaDem drivers & RogaRec Software
-
32-76 -
Testing Machines, Inc.
Testing Machines Inc., is globally recognized as the leading supplier of Coefficient of friction instrumentation. Our NEW 32-76 coefficient of friction tester uses advanced digital force signaling and high speed data acquisition software providing unmatched precision and repeatability in COF testing. Improved features include a color touchscreen display and intuitive software user interface for easy navigation and test method storage. Based on the horizontal plane method, coefficient of friction and Slip properties aid in the evaluation of chemicals and additives used to create, monitor or minimize the degree of friction between two contacting test specimens or surfaces.
-
Fluke Calibration
All Fluke data acquisition products feature unique, built-in universal signal conditioning and a plug-in Universal Input Module to enable you to measure virtually any type of signal without having to purchase extra equipment. Plus, powerful, easy-to-use Windows®-based software supports easy configuration, advanced trend analysis, professional- quality reporting, and enables you to quickly build human-machine-interfaces without any programming.
-
Power Test, Inc.
Power Test Dynamometer offers a complete high capacity load testing solution with our load bank and gen set testing systems. Capable of testing generators and AC/DC power sources, our load bank systems safely apply electrical loads across the entire spectrum of operation. By offering a one-stop-shop for your Load Bank and it's accompanying data acquisition software, Power Test is committed to Making Your Testing Easy.
-
OpTest™ MTF -
Optikos Corporation
The Optikos OpTest™ MTF Testing Equipment is the most flexible and complete system for characterizing the optical performance of optical elements, lens assemblies and optical imaging systems in Infinite Conjugate, Finite Conjugate and Afocal configurations spanning the UV, Visible, NIR, SWIR, MWIR and LWIR spectral regions . OpTest™ software drives Optikos hardware, is easy to use and controls all motion control, image acquisition, configuration set-up and data reporting.
-
Elettra -
BioAge s.r.l.
Elettra has been designed to operate on its own, but it is also possible to connect it to a PC to control it and acquire, view and save data thanks to its extremely easy to use software that runs under MS-Windows™. The data acquisition process can be controlled extremely quickly thanks to the PLAY, PAUSE and STOP keys. Captured data can be saved in an Excel compatible format and graphs saved as bitmap images. By clicking on a button, the software is able to open the Excel program installed on the PC, enter all the data and create countless graphs, ready to be inserted in your documents and publications. At any moment it is possible to take a picture of the graph showing the frequency variation and save it as a bitmap image, to be able to insert it in documents and publications. The same keys that are present on the instrument are found on the software, these allow you to control the instrument remotely. On the frequency variation graph it is possible to zoom in on the regions of interest, it is also possible to display two cursors on the graph, thanks to these cursors it is possible to easily and immediately calculate the value of the frequency variation between any two points on the graph. The software is extremely easy to use and performs many other useful functions, such as automatic recognition of the computer port to which the instrument is connected. BioAge builds tools and writes software only after having carefully listened to the needs and requirements of the users of the final products, this process has the purpose of creating products that are easily usable and that have all the characteristics and functions that the user expects to have.
