Filter Results By:

Products

Applications

Manufacturers

Showing results: 1261 - 1275 of 2052 items found.

  • RF Diagnostic Chamber

    DST200 - Rohde & Schwarz GmbH & Co. KG

    The R&S®DST200 RF diagnostic chamber is the ideal environment for RF analysis during development. It supports a wide range of radiated test applications for wireless devices and fits on any R&D lab bench, where it can be used at all times during the product design and optimization phase. The R&S®DST200 effectively assists in achieving high first-time pass rates during final type approval, which saves time and money.

  • ScanWorks IJTAG Test

    ScanWorks IJTAG Test - ASSET InterTech, Inc.

    The ScanWorks Internal JTAG (IJTAG) tools allow system-on-a-chip (SoC) designers, DFT engineers and validation engineers a new and simpler way to access, control and run any embedded instrument designed into chips. When the IEEE ratifies the IEEE 1687 IJTAG standard in 2013, it will enable easy access to run any functional type of IJTAG instrument. ASSET is the first tool supplier with development tools available today for the early adopters of this important new technology.

  • SparkFun LTE GNSS Breakout

    SARA-R5 - SparkFun Electronics

    The SparkFun SARA-R5 LTE GNSS Breakout is a robust development tool for u-blox's impressive SARA-R510M8S module. The SARA-R510M8S combines u-blox's UBX-R5 cellular chipset with their M8 GNSS receiver chipset to provide a 5G-Ready wireless IoT device complete with positioning data all on a single chip. As an asset tracker, the LTE GNSS Breakout offers Secure Cloud LTE-M communication for multi-regional use and has an integrated u-blox M8 GNSS receiver for accurate positioning information.

  • Spectrum Analyzers

    T3SA Series - Teledyne LeCroy

    Teledyne Test Tools new T3SA3000 family of Spectrum Analyzers offers a frequency range of 9 KHz to either 2.1/3.2 GHz alongside many impressive features. With their light weight, small form factor, and user friendly interface, these Spectrum Analyzers take powerful and reliable automatic measurements that are presented on a large, bright, easy to read touch screen display. Typical uses for the T3SA3000 series are research and development, education, production, maintenance, and pre-compliance testing.

  • 5G Core (5GC) for Small Cells and Private Networks

    SmallCellCORE-5G - CommAgility Limited

    SmallCellCORE-5G provides a 5G Core (5GC) for 5G small cells and private networks. SmallCellCORE-5G joins CommAgility's existing 5G stack, PHY and reference chain software, to create an integrated solution with the company's hardware platforms.With SmallCellCORE-5G, developers can now build their 5G network with a complete set of hardware and software from CommAgility – already tested and integrated. Development is quicker and easier, and risk is reduced by working with a proven solution, backed up by CommAgility's expert, global support.

  • Bipotentiostat

    PARSTAT 3000A-DX - Ametek Scientific Instruments

    The PARSTAT 3000A-DX from Princeton Applied Research is both a hardware synchronized bipotentiostat/galvanostat and dual channel potentiostat/galvanostat in one.  The compact design, based on the popular PARSTAT 3000A, combines 2 high performance, independent potentiostats in a single chassis.  Combine this with a hardware synchronized start and the VersaStudio software platform for a fully functional bipotentiostat that is suitable for a range of applications from mechanistic studies and electrocatalyst evaluation using a rotating ring disk electrode (RRDE) to sensor development.

  • Industrial Ethernet Physical Layer Devices

    Analog Devices Inc.

    The ADI Chronous™ Industrial Ethernet physical layer (PHYs) portfolio includes solutions for standard 10 Mbps, 100 Mbps, and 1 Gbps. It also features the new 10BASE-T1L technology for single-pair Ethernet.Our industry-leading low latency and low power PHY technology maximizes data transmission and signal integrity in deterministic applications by reducing cycle times and system power consumption. It enables superior synchronization of signals across the industrial network and supports the development of TSN.

  • Signal Generator Extension Modules

    SGX - Virginia Diodes, Inc.

    Virginia Diodes, Inc. (VDI) Signal Generator Extension (SGX) modules provide high performance frequency extension of microwave signal generators into the THz range. VDI SGX modules offer full waveguide band coverage and are available from WR15 (50 to 75 GHz) to WR1.0 (750 to 1100 GHz) with additional bands under development. This turn-key, sweepable solution is compatible with any microwave signal generator that meets the input frequency and power requirements.

  • VISAT

    EMAG Technologies Inc..

    VISAT™ (Vertically Integrated Scalable Antenna Tile) is an innovative RF front end technology under development by EMAG Technologies Inc. for more than ten years. Its objective is to provide a generic, modem-agnostic, reconfigurable RF front end solution for data links, ground-based, aerial and satellite communications, radar and electronic warfare systems. Point-to-point data transmission and tracking require high-gain, narrow-beam antennas with versatile and agile beam steering capability.

  • Refinery Gas Analysis

    Shimadzu Corp.

    Gas compositions produced in refinery plants consist of hydrocarbons, permanent gases, H2S, etc. Analyzing these gases is essential to control the quality of chemical products and plant operation. Shimadzu's RGA systems, available in numerous configurations, are designed to analyze various compositions in a variety of processes. In research and development for petrochemical and its catalysis field, target compounds often contain high-boiling point compounds and isomers. The Shimadzu CERGA makes it possible to precisely analyze those samples.

  • Wafer Sorting System

    SortMax300™ - Genmark Automation

    Genmark's SortMax300™ is a next generation SORTER producing the highest throughput rapid software set-up and lowest cost-of-ownership culminating from 25 years' experience in design, development, and manufacture of wafer handling equipment.High throughput is achieved using Genmark’s high precision robots, including the robot series featuring the patented GPR technology robots enabling automatic compliant interaction with misaligned process modules and capable of deflection compensation during transport of high payloads.

  • Teamcenter® Software

    Teamcenter - Siemens Digital Industries Software

    Teamcenter® software is a modern, adaptable product lifecycle management (PLM) system that connects people and processes, across functional silos, with a digital thread for innovation. The unmatched breadth and depth of the Teamcenter portfolio means that you can solve more of the tough challenges required to develop highly successful products. From the easy, intuitive Teamcenter user interface, people across the organization can take part in the product development process more easily than ever before.

  • Dynamic Memory Debugger

    MemoryScape™ - Rogue Wave Software Inc.

    Advanced memory debugging and analysis capability helps you identify and resolve difficult memory problems in C, C++ and Fortran. It provides a graphical, real-time view into heap memory, memory usage, memory allocation bounds violations and memory leaks, without instrumentation. Its built-in scripting language makes batch mode testing easy and efficient; incorporate the scripts into your nightly processing to verify that new development has introduced no new memory errors.

  • Modular Functional Test Platform

    LX-OTP2 - LXinstruments GmbH

    The OTP² system platform has recently been available in both the PXI and LXI versions. The OTP2 system platform enables the cost-effective and fast implementation of function test systems based on defined modules and function blocks. Thanks to the open system interfaces, customer-specific adjustments can be made at any time without any problems. When considering options for your next generation functional test system, it is important to assess the entire life cycle of the system and the associated costs and efforts. Use OTP² to accelerate development cycles and reduce the development effort for new functional test systems.

  • Programmable USB Hub with 4 Charge Ports

    Acroname, Inc

    The USBHub2x4 is a programmable USB 2.0 compatible hub featuring 4 device downstream ports with standard USB type-A receptacles and each port is capable of delivering up to 2.5A simultaneously. With two host (upstream) connections using usb mini-B connectors, the USBHub2x4 is perfect for environments where multiple devices need to be shared or switched between two host computers. E.g.: software regression testing, iPhone software development and validation, Android software development and validation, USB device regression testing, manufacturing testing, device burn-in testing and USB device charge-curve testing.

Get Help