Showing results: 766 - 780 of 6446 items found.
-
KT-2810 -
KILTER ELECTRONIC CO.,LTD
Improved middle-class LCR meter 20×2 large character LCD display With back-light Easy operation with strong functions Good Readout stability 4 Bins comparator and HANDLER interface RS-232C interface Optional operation software
-
JC-1202 -
KILTER ELECTRONIC CO.,LTD
Over-thin design,cabinet volumeEasy to read with color or monochrome (NST) LCD display.Advanced Triggering function from edge,video,pulse,delay.FFT spectrum analysis:Hanning,Hamming,Blacking,Rectangle.Period, Risetime,Falltime,+Width,-Width,Overshoot,Preshoot,+Duty,-Duty,etc.10 Waveforms parameter Setups,Save,Reall.Power supply:100∼240V, 45∼65Hz,<30W.Standard Configuration:USB DeviceOption Configuration:USB Host, Support U-Rardware Storage, Timedisplay
-
KT-8322C -
KILTER ELECTRONIC CO.,LTD
33/4 digits LCD display with 3999 counts. Over range indication: Display "0L" or "-0L" Auto range, Auto power off. AC/DC Current & Voltage Test. R, C, F, Temperature Test. True RMS. RS232 interface output. Power supply: 2 x1.5V UM3 "AA" battery
-
KT-7183 -
KILTER ELECTRONIC CO.,LTD
0.5" (13mm) LCD Max. indication 1999 or - 1999. Engine TACHO & DWELL MEASUREMENT. Polarity: Bi-polar by automatic switching. "-" indicates reverse polarity. Over-input: Indication of "1" or "-1" Complete with test leads, 9V battery, and protective rubber holster
-
KT-9030C -
KILTER ELECTRONIC CO.,LTD
3 1/2 digit LCD with Max. reading of 1999. ACA, ACV measurement; Data Hold function. Jaw size: 28mm Max. Continuity Beeper, Diode Test. Hand guard protection meet IEC1010 safety requirements
-
JC-1102 -
KILTER ELECTRONIC CO.,LTD
Over-thin design,cabinet volumeEasy to read with color or monochrome (NST) LCD display.Advanced Triggering function from edge,video,pulse,delay.FFT spectrum analysis:Hanning,Hamming,Blacking,Rectangle.Period, Risetime,Falltime,+Width,-Width,Overshoot,Preshoot,+Duty,-Duty,etc.10 Waveforms parameter Setups,Save,Reall.Power supply:100∼240V, 45∼65Hz,<30W.Standard Configuration:USB DeviceOption Configuration:USB Host, Support U-Rardware Storage, Timedisplay
-
BT-100D -
Konstar Electric Industrial Co., Ltd
Battery tester can test the car battery whether is ok, if the battery is bad or need chanrge or bad, the tester will give you the right check reasult, then can do the right plan for the battery before work.
-
CM3-VA7 -
Chuan Sheng Electronics Co., Ltd.
CM3-VA7 is a multifunctional 3-phase voltage/ current meter.With 3 phase voltage or current display at the same, configurable display range via front buttons, anti-inference design, reliable quality and easy to use and install CM3-VA7 also has multiple I/O functions including 3 relay outputs, an analogue output and a RS485 communication port running the Modbus RTU Protocol.
-
MW(Q)-5A -
Chuan Sheng Electronics Co., Ltd.
Mx-5A meter to provide power (Watt or Active Power or Re-active Power or Power Factor), high-precision measurement, display and remote communication capabilities.Additional purchase: 1 group of relay outputs, 1 analog output, an RS485 communication output (the Modbus RTU Mode) interface, so that can be installed in power management, remote input and output, alarm and variety of remote communication control the use of needs.120mm (D) is ideal for assembling in panels with limited penetration depth.
-
MPF-5A -
Chuan Sheng Electronics Co., Ltd.
Mx-5A meter to provide power (Watt or Active Power or Re-active Power or Power Factor), high-precision measurement, display and remote communication capabilities.Additional purchase: 1 group of relay outputs, 1 analog output, an RS485 communication output (the Modbus RTU Mode) interface, so that can be installed in power management, remote input and output, alarm and variety of remote communication control the use of needs.120mm (D) is ideal for assembling in panels with limited penetration depth
-
CM3-VA9 -
Chuan Sheng Electronics Co., Ltd.
CM3-VA9 is a multifunctional 3-phase voltage/ current meter.With 3 phase voltage or current display at the same, configurable display range via front buttons, anti-inference design, reliable quality and easy to use and install, CM3-VA9 also has multiple I/O functions including 6relay outputs, 3 analogue output and a RS485 communication port running the Modbus RTU Protocol
-
CSN-VA -
Chuan Sheng Electronics Co., Ltd.
CSN-VA is an economic &simple indicator,large LED display 20.0mm height,anti-jamming design, reliable quality and easy installation.Multiple range of input models, you can specify AC or DC voltage / current ,frequency, 4 ~ 20mA, 0 ~ 10V and pulse signals for all general measurement requirements.
-
VAW -
Chuan Sheng Electronics Co., Ltd.
VAW DC Multifunction Power Meter provide high accuracy measurement, display and communication of DC voltage, Current, Power, Energy(import / export), and Run Hour. They are also building in 4 Relay outputs, 1 Analogue output, 1 Pulse output , 2External Control Inputs and 1 RS485(Modbus RTU Mode) interface with versatile functions such as remote I/O, alarm and communication for DC power applications like as solar, wind power system or portable electronic device consumption testing.For the power saving, VAW has built in an innovation timer to switch down the light and power of LED. It makes sense to build the meter in a green power system.
-
VAM -
Chuan Sheng Electronics Co., Ltd.
VAM Voltage & Current Meter has been designed with high accuracy dual channels(isolated) measurement, dual display and communication of 0~600V and 0~10A for DC/AC/TMRS. In compact size(48 x 96mm)● Build in mathematic function such as Addition / Subtraction / Multiplication / Division / high or low selector in 2 channels input to meet various testing equipment inquiry.They are also build in 4 Relay outputs, 1 Analogue output and 1 RS485(Modbus RTU Mode) interface with versatile functions such as control, alarm, re-transmission and communication for a wide range of industrial applications.
-
CSS-4/5 -
Chuan Sheng Electronics Co., Ltd.
● Measuring DCA, DCV, ACA, ACV, Hz● Process signal mA, Vdc, Strain Gauge, Potentiometer, Pt100Ω● High accuracy and resolution● User function, easily programmed from the front panel by push-button, and set-point by Dip-Switch● Modular design, and popular input range programmable● Three relay ( Hi / Low / Go ) outputs● Optional excitation supply available