Filter Results By:

Products

Applications

Manufacturers

Showing recent results 181 - 195 of 330 products found.

  • EMC Test System

    MICRONIX

    An electric product might cause the malfunction to other electric appliances by discharging the emission noise from it, or is oppositely caused the malfuction by the emission noise from other electric appliances. The former is checked by the EMI test and the latter is checked by the EMS test. The international standard like the CISPR standard is provided so that such an accident should not happen, and the manufacturer must declare by themselves beforehand that their product meets the standard. The generic name of the EMI test (Electro-Magnetic Interference) of the emission measurement and the EMS test (Electro-Magnetic Susceptibility) of the immunity

  • Simulating Optical Design Components

    Wave Optics Module - COMSOL, Inc.

    The Wave Optics Module provides dedicated tools for electromagnetic wave propagation in linear and nonlinear optical media for accurate component simulation and optical design optimization. With this module you can model high-frequency electromagnetic wave simulations in either frequency- or time-domain in optical structures. It also adds to your modeling of optical media by supporting inhomogeneous and fully anisotropic materials, and optical media with gains or losses. It is straightforward to simulate optical sensors, metamaterials, optical fibers, bidirectional couplers, plasmonic devices, nonlinear optical processes in photonics, and laser beam propagation.

  • Momentum G2 Element

    W2341EP - Keysight Technologies

    The Momentum G2 Elementis the improved 2nd generation of the powerful Momentum 3D planar electromagnetic simulator from Keysight EEsof EDA, the technology and innovation leader in high-frequency mixed-signal electronic design automation (EDA). Momemtum G2 is seamlessly integrated into the Advanced Design System (ADS), the only design simulation platform that enables the co-design of IC, package and board in high-frequency and hi-speed applications. It seamlessly integrates system, circuit, full 3D electromagnetic simulation with Keysight's test instrumentation for you to do single pass successful electronic designs repeatedly.

  • Compact Accelerometer (Shock Meter)

    AP2019 - ZETLAB Company

    *Can be used as shock sensors in equipment diagnostic systems;*Combination of high axial sensibility, intrinsic frequency and shock resistance;*Low sensitivity to electromagnetic fields;*Low intrinsic noise level.

  • Accelerometer

    AP2038 - ZETLAB Company

    *Combination of high axial sensibility, intrinsic frequency, and shock resistance;*Low sensitivity to electromagnetic fields;*Feed voltage and current wide range;*Low intrinsic noise level.

  • EMS Measurements

    Rohde & Schwarz GmbH & Co. KG

    EMC and EMI test equipment and systems from Rohde & Schwarz determine the causes and effects of electromagnetic interference. Decades of experience in the field of EMC measurements has made us the world's market leader.

  • EMC Test Software

    Rohde & Schwarz GmbH & Co. KG

    EMC and EMI test equipment and systems from Rohde & Schwarz determine the causes and effects of electromagnetic interference. Decades of experience in the field of EMC measurements has made us the world's market leader.

  • EMF Measurements

    Rohde & Schwarz GmbH & Co. KG

    EMC and EMI test equipment and systems from Rohde & Schwarz determine the causes and effects of electromagnetic interference. Decades of experience in the field of EMC measurements has made us the world's market leader.

  • EMI Precompliance

    Rohde & Schwarz GmbH & Co. KG

    EMC and EMI test equipment and systems from Rohde & Schwarz determine the causes and effects of electromagnetic interference. Decades of experience in the field of EMC measurements has made us the world's market leader.

  • Near-Field Probes 100 kHz up to 50 MHz

    LF1 set - Langer EMV-Technik GmbH

    The LF1 near-field probe set consists of 4 shielded near-field probes used during the development process for emission measurement of longwave, medium wave, and shortwave frequencies on electronic devices. The probe heads of the LF1 set are designed for incremental detection of sources of electromagnetic interference on assemblies. First, the electromagnetic interference of the assembly is detected by the LF-R 400 probe from up to 10 cm. Then probes with higher resolution like the LF-B 3, LF-U 5 and LF-U 2.5 are used to more precisely detect any source of interference. The probe heads are designed for taking measurements at single pins and larger components. Near-field probes are small and handy. They have a current attenuating sheath and, therefore, are electrically shielded. They can be connected to a spectrum analyzer or an oscilloscope with a 50 Ω input. The H-field probes do not have an internal terminating resistance of 50 Ω.

  • Test Bench for AC Compressors

    MS111 - MSG Equipment

    The test bench is intended to test AC compressors of wide range of vehicles on R134a refrigerant. The equipment detects failures of a vehicle unit before its mounting in a car, whether it is a remanufactured, repaired unit or a used one. In the process of testing, data is shown on LCD display. It gives an opportunity to follow testing results realtime, save and/or print them due to software special features. Unit fixation mechanism is very flexible: a compressor can be easily fixed, no matter what kind of fittings it has. Units with electromagnetic clutch or electromagnetic valve can be tested both separately and simultaneously. Peculiar features of electric commutation are considered, connection polarity is identified automatically, indicator on the control panel indicates on presence of a diode in a circuit.

  • Laboratory EM current meter / water level and wave height meter

    JFE Advantech Co., Ltd.

    ACM2-RS and ACM3-RS are 2-D and 3-D electro-magnetic current meters for laboratory experiments. The models provide digital output, a high-speed sampling rate and insusceptibility to electro-magnetic noise. ACH-600RS is a highly sensitive capacitance water level meters. With the new system, a maximum of four different sensors can be connected to the compact interface unit, enabling simultaneous recording on a personal computer. Additionally, the system can provide analog output as well as necessary. While conventional water level and wave height meters cannot be used near velocity sensors, our instrument can be as near as 5 cm without increasing noise, due to its special isolated circuit. The result is an innovative system that is capable of achieving highly accurate data.

  • Keysight FEM Simulator Element

    W2342EP - Keysight Technologies

    The Keysight FEM Simulator Element (formerly known as EMDS G2) provides full wave 3D EM simulation capabilities based on the Finite Element Method (FEM). This frequency domain simulation technology can be used in both the Electromagnetic Professional (EMPro) 3D EM platform and the Advanced Design System (ADS), the flagship product from Keysight EEsof EDA, the technology and innovation leader in high-frequency mixed-signal electronic design automation (EDA). ADS is the only design simulation platform that enables the co-design of IC, package and board in high-frequency and hi-speed applications. It seamlessly integrates system, circuit, and full 3D electromagnetic simulation with Keysight's test instrumentation for you to do single pass successful electronic designs repeatedly.

  • Gerber Union Element

    W2322EP - Keysight Technologies

    The Gerber Union Element is a Gerber file format layout import and translation tool to produce clean layout for full 3D and planar electromagnetic (EM) simulation from Keysight EEsof EDA, the technology and innovation leader in high-frequency mixed-signal electronic design automation (EDA). It is seamlessly integrated into the Advanced Design System (ADS), the only design simulation platform that enables the co-design of IC, package and board in high-frequency and hi-speed applications. It seamlessly integrates system, circuit, full 3D electromagnetic simulation with Keysight's test instrumentation for you to do single pass successful electronic designs repeatedly.

  • TEM Cells

    EMCTEST Tecnologia Eletronica e Telecomunicaçao Ltda.

    Transverse Electro Magnetic (TEM) cell or Crawford cell (named after its inventor) is used to generate accurate electromagnetic waves over a wide frequency range: DC (0 Hz) to GHz., EM waves generated in the cell propagate in transverse mode and have the same characteristics as a plane wave. It can be used to calibrate E-field broadband probes for testing radiated E-field immunity as well as for measuring radiated emission from a product with a spectrum analyzer/EMI receiver.TEM cell generates a consistent electromagnetic field for testing small RF devices such as wireless pagers, receivers, portable phones, etc.