Filter Results By:
Products
Applications
Manufacturers
-
product
Contacting Single-turn
A rotary position sensor translates angular mechanical position to an electrical signal. Rotary position sensors are designed for applications that typically require frequent adjustments. Shaftless designs allow for different engagement mechanisms, such as a customized shaft, a motor control, a human interface adjustment or a mechanical arm position locator. Rotary position sensors can be used in applications where a user needs to control a variable output such as a frequency, speed or volume control. Typical applications include test and measurement equipment, consumer electronics, small engines, robotics, and medical equipment. The Bourns® Model 3382 Series uses resistive technology to sense rotary position.
-
product
Non-Contacting Single-turn
A rotary position sensor translates angular positions to an electrical signal. Rotary position sensors are designed for applications that typically require frequent adjustment. Shaftless designs allow for a different engagement mechanisms, such as a customized shaft, a motor control, a human interface adjustment or a mechanical arm position locator. Rotary position sensors can be used in applications where a user needs to control a variable output such as a frequency, speed or volume control. Typical applications include test and measurement equipment, consumer electronics, small engines, robotics, and medical equipment. The Bourns® Model AMS22S Series uses Hall Effect magnetic technology to sense rotary position.
-
product
2.0 ~ 68.0 Gb/s Pulse Pattern Generator
CA9809
The UC INSTRUEMNTS CA9809 2.0 ~ 68.0 Gb/s Pulse Pattern Generator pulse pattern generator and error detector is a high performance, flexible and costeffective broad band data rate covered Pulse Pattern Generator that can operate from 2.0 Gb/s to 68 Gb/s. The CA9809 can be used with existing equipment to generate higher rate bit streams for use in telecom applications up to 68 Gb/s. Broadband test systems will benefit from the low power dissipation, precision connectors, and excellent output waveform characteristics. The compact size of the equipment allows the CA9809 to be placed at the measurement plane, reducing or eliminating artifacts related to long cables.
-
product
Reach-In Ageing Test Chambers
Aging Chamber has been designed to simulate environmental condition to test the stability and reliability of products under stressed environment. Weiber is a leading manufacturer and supplier of Aging Test Chamber in India and abroad. Weiber offers scientific equipments at the most economical rates and versatile design. Microprocessor based Aging Test Chambers are made in accordance with the international testing standards. The equipments are NABL, NSF certified and CE approved. Aging Chamber maintains 25% to 95 % RH. The Test Chamber is digitally controlled delivering accurate result under controlled environmental conditions. This chamber also known as Accelerated Ageing Test Chamber.
-
product
Coaxial Tracing
Coaxial cabling, by its nature, is often difficult to trace with "traditional" equipment. This is because the screen is most commonly grounded, which prevents any electrostatic field to radiate. In return, Greenlee has created a specialist coaxial cable identification kit: the 402K.
-
product
Consumer Global Shutter Image Sensors
Smart GS Series
SmartSens creatively combines the backside-illuminated (BSI) pixel design process with the Global Shutter image sensor design to provide imaging performance with better signal-to-noise ratio, higher sensitivity and wider dynamic range . The new vitality of intelligent sensing equipment.
-
product
CO₂ Sensor
ExplorIR®-W
The ExplorIR®-W is a small footprint low power CO₂ sensor designed for applications where space is at a premium. The combination of small size, low power and high accuracy makes this sensor suitable for portable, battery powered personal safety equipment.
-
product
Demo Board
DB Series
*Allows for easy bread boarding of any surface mount part. *SMA connectors allow quick hook up to standard test equipment. *Works with our Programming Modules and TCXO Demo boards. *Specifications match the incorporated surface mount part.
-
product
Energy Measuring Units
Mitsubishi Electric Automation, Inc
Energy measuring units to support energy saving at workplaces.These units support to monitor consumption energy precisely, which is necessary for reducing energy cost. By combining with Split-type current sensor, you can easily fix in equipments which you want to measure.
-
product
Gage Calibration Services
Accu-Chek calibrates all inspection, measuring, and test equipment (IMTE) to either manufacturer’s specifications, Federal/Military/ANSI specifications or, if requested, we can perform calibrations to customer requirements. We calibrate all IMTE using written procedures and standardized data sheets.
-
product
Gas Chromatograph for Analyzing Trace Hydrocarbon
GC2010B
Chongqing Kailian Yongrun Industrial Co.,Ltd.
To analyze trace hydrocarbon (C1 – C4) in liquid oxygen, liquid air, air at exhaust inlet of air separation equipment, and trace hydrocarbon (C1 – C4) in liquid oxygen tank. Provide data for safety production of oxygen generator and guide the production.
-
product
Miniature LVDT Position Sensors
Miniature LVDTs are ideal where reliable measurements are needed in small spaces. With options for venting up to 30,000 psi, and temperature ratings to 400°F (200°C), these LVDTs operate in hydraulic equipment, embedded in robotics, and used in harsh downhole conditions.
-
product
PacStar Commercial Solutions for Classified (CSfC) Solutions
Curtiss-Wright Defense Solutions
The National Security Agency (NSA) Commercial Solutions for Classified (CSfC) program enables organizations to transmit classified information using commercial-grade encryption solutions (when appropriately tested, certified, and configured), eliminating the need for expensive, difficult-to-use classified equipment.
-
product
Phase Shifter Modules
The Analog Devices portfolio of analog phase shifters and digital phase shifters provides controllable phase shift that is ideal for multiple designs. These devices are used in a range of technologies, including wireless infrastructure, test equipment, fiber optics, and aerospace and defense applications.
-
product
Pulsed Withstand Voltage Safety Test
Suzhou 3ctest Electronic Co.,Ltd.
Designed to test the induced and conducted disturbance on the telecom lines generated by power line and electrical railway. It meets the requirements of YD/T 993-2006(The technical requirements and test methods of over-voltage and over-current resistibility for telecommunication terminal equipment), ITU-T K21 and ITU-T K44.
-
product
Signal Generators
NF‘s function generators have been used in many applications, since NF produced the first Japan-built function generator in 1959.A function generator is general-purpose test equipment used to generate various waveforms and to execute trigger, sweep and gate oscillation.
-
product
Single Truck Steri-Dry™ Sterilizer
The Gruenberg Steri-Dry™ Dry Heat Lab Animal Science Sterilizer provides the lab animal science market with equipment to sterilize habitat cages through the process of dry heat sterilization. These sterilizers are designed and built for lab animal science applications.
-
product
Sphygmomanometer Calibrator
Huaxin instrument (Beijing) Co., Ltd
Here at Huaxin, as an expert test equipment solution provider, we are proud to offer a selection of pressure calibrators for precise calibration of sphygmomanometer in laboratory and on site. Our sphygmomanometer calibrators find wide applications in metrology bodies, hospitals, university labs, etc.
-
product
Vector Network Analyzer Automation
CMT’s vector network analyzer software supports multiple automation languages, including C++, Python, MATLAB*, Visual Basic (Excel)*, and LabVIEW*. Our command set is modeled after industry-standard legacy equipment; porting code is straightforward, and we can help.
-
product
Virtualization Software
Enea NFV Core
Enea NFV Core is a carrier-grade virtualization software platform built on OPNFV and OpenStack. It enables deployment and management of virtual Customer Premise Equipment (vCPE) network functions in central offices and data centers, utilizing cost efficient generic hardware platforms.
-
product
Head-separated Dual Display Digital Pressure Sensor [For Gas]
DPS-400 / DPH-100
Panasonic Industrial Devices Sales Company of America
The DPS-400 Pressure Sensors were designed to meet the specific requirements needed at today's production sites such as miniaturization of Sensors to facilitate the downsizing of equipment, convenient shape to better fit into their machines and efficient set-up functions that can help reduce the man-hours spent on replacements.
-
product
Parallel Seam Sealers
It is an equipment to hermetically seal the packages, such as the crystal and SAW devices, optical devices, sensors, MEMS, etc., by seam welding. Hermetic sealing can be accomplished in both N2 and vacuum environment. Furthermore, we are offering a variety of products for research and development and production applications.
-
product
Cryogenic Platforms
QMC Instruments are able to build standalone dry cryogenic platforms and support equipment to suit customer needs. Our range spans everything from off the shelf 4k cryostats that we cool our TES detectors in, to bespoke sub-kelvin systems.
-
product
4 2/3 Digit Temperature (TC) Meter (1/42 DIN)
CS3-TC
Chuan Sheng Electronics Co., Ltd.
CS3-TC Temperature Indicator has been designed with high accuracy measurement.A compact body design for small equipment, laboratory instrument, and others.Also are available with relay output, analog output, RS485 Modbus RTU communication to cover a wide range of applications.
-
product
Accessories: Test Software
NODES™ is the one-stop-shop software package for all your Intermittent Fault Detection (IFD) needs. It is the standard user interface software used on the VIFD™ and IFDIS™ ranges of IFD test equipment, and is also compatible with earlier models.
-
product
Ascent Software
Using Ascent software in tandem with a vbSeries portable or permanently-mounted instrument, companies are able to effectively monitor the condition of their plant equipment with unprecedented accuracy. This monitoring ensures peak performance and increased quality, output and compliance while reducing cost, time and risk.
-
product
Predictive Maintenance
Predictive Maintenance (also known as Condition Based Maintenance) defines the need for maintenance tasks based on the actual condition of the machine.Predictive maintenance helps to eliminate catastrophic equipment failures, extends the operational life of machine components and reduces the costs of parts and labor.
-
product
Optical Transceiver
RJ-11
The next generation of optical transceiver has arrived with the introduction of GCI's RJ-11 Optical Transceiver. This fully SEMI compliant and Hokuyo compatible unit is the choice of leading 300mm FABs and equipment manufacturers throughout the world to simplify installation and maintenance of their E84 communications.
-
product
Microwave Monitor + Power Check Kit
A100c
This single-range, RF power measurement instrument is designed to operate in the 2.45 GHz range. Used by field service engineers, engaged in the repair and maintenance of commercial and domestic microwave heating equipment, its primary function is the detection RF microwave energy leakage.
-
product
New Generation Analyzer For IEEE C37.94
NetProbe 2000 C37.94
The NetProbe 2000 C37.94 is a field analyzer with IEEE C.37-94 Multimode optical fiber interface for testing bit error preformance between teleprotection and digitalMultiplexer equipment. Can be combined with many optional interfaces for T1,E1, WiFi, VoIP and V-series testing.