Showing results: 661 - 675 of 999 items found.
-
Bloomy Controls, Inc.
Bloomy's 8-Channel Load Module provides isolated current and voltage measurements for eight on-board 5W loads or for eight off-board 120W loads. With built-in switching for calibration and fault injection, the module provides unsurpassed capability for Mil/Aero applications. The module also provides switching and connections to allow switching between a real load (e.g., actuator, valve, etc.) and the simulated load.
-
OxyTec-5S -
Chaban Technology Ltd.
The Oxytech 5S is an advanced oxygen therapy solution that provides its users with a higher standard of care. -Emphasis on Safety, High/Low Flow, High/Low Pressure, Low Oxygen, Power Failure alarms. Advanced, optional Monitoring Capabilities. -Ease of maintenance, convenient access or filter cleaning: due to its unique design, awarded with a Certificate of Design Patent. -Optimum patient comfort, due to its easy to use design, features and operation. -Lightweight (only 15.9 kg), quiet (less than 45dB), reliable (94% AVG oxygen purity).-User friendly, capable of operating 24 hours continuously.-Easy-to-read electronic control panel – with LCD display including an audio and visual alarm system indicating low oxygen concentration, power off, pressure circulation fault and compressor fault.-Minimal power consumption.-Controlled oxygen output – from 0.1 to 5.0 LP
-
HGM-MZ -
IMR Environmental Equipment, Inc.
The Multi-Zone Monitor provides continuous detection of refrigerant gas levels in up to 16 separate test zones and can be fitted with an optional two channel 4-20 mA current loop board for connection to remote monitoring equipment. Multi-Zone monitors retain a log of previous readings that can be easily accessed for analysis. Four relay contacts are provided that can be programmed to trigger external alarm devices in the event of a system fault, or if a leak (small), spill (medium) or evacuation (large) level of gas is detected, while audible and visual front panel indicators show alarm and fault conditions.
-
COMBI521EV -
HT Italia Srl
COMBI521EV is the new HT instrument to perform verification and control of electric car charging stations (EVSE) safety according to IEC / EN 61851-1 and IEC / EN60364-7-722 standards. Being a combined verification instrument, COMBI521EV also carries out tests on electric systems in compliance with IEC/EN 61557-1 and therefore measurements of continuity of the protection cable, insulation resistance (with calculation of PI and DAR), overall earth resistance, RCDs type B, A and AC tripping time and current, line / fault impedance with calculation of prospective short circuit / fault current, phase sequence and conformity.
-
JPRO -
Noregon
JPRO Commercial Vehicle Diagnostics (CVD) scans any class 7-8 truck in less than a minute and displays 44,000+ detailed fault codes. With JPRO, technicians see and solve all issues related to the multiple systems found on the truck that may be causing problems with other vehicle components. Techs love JPRO because it saves them time, increases their efficiency during diagnosis and repair!
-
Vonaq Ltd
The ARTISAN xDSL with Bonding handheld tester is a powerful and comprehensive ADSL and VDSL Test solution. The AutoTest feature makes testing standard and Channel Bonded lines simple and keeps training needs to a minimum. Features such as 7” colour touchscreen, Web Browser, Histograms for monitoring longer term intermittent faults and industry leading Broadcom chipset puts the Vonaq ARTISAN xDSL Tester ahead of the pack.
-
Megger Group Ltd.
Locating high and low impedance faults on paired metallic cables is a crucial yet often difficult task for a telecoms engineer. Megger designs TDRs specifically for the communications industry, which makes each unit a safe, application specific tester that can be used on virtually all communications cable types. The wide range of TDRs makes it easy to choose the tester with the resolution and range you need.
-
Bloomy Controls, Inc.
Bloomy’s 8-Channel Thermocouple Simulator Module provides eight channels of galvanically-isolated thermocouple simulation and simulates types E, J, K, M, N, and T thermocouples. High-precision digital-to-analog converters which are isolated from each other and from system power provide sub-microvolt resolution and accuracy. Built-in switching provides open-circuit faults as well as switching to system calibration resources.
-
KV Hipot Power Test Equipment Co.,Ltd
resistance tester is used to measure the resistance of the earth is called Earth Resistance Tester. All the equipment of the system is grounded through the earth electrode. Unhindered earthing protects electrical equipment and personnel from the fault current.
-
Chongqing Dodem Communication Technology Co., Ltd
DP-500 2M data transmission quality analyzer is our Dodem self-developed handheld tester. It is widely used in BER test and line fault analysis, suit for the maintenance and measurement of 2M system and Nx64k signal channel.
-
Reach Technologies Inc.
Reach Technologies' Generator Monitor is a high performance, DSP enabled, power generation monitor, quality analyzer and event data logger. The Generator Monitor is ideal for monitoring 3-phase power generation installations in support of Smart Grid compliance. Our goal is to help our customers retrofit existing and OEM new installations to improve quality, and maintain stability through the fast detection, recording and notification of power faults.
-
FLIR GF320 -
Teledyne FLIR
The FLIR GF320 detects hydrocarbon and volatile organic compound (VOC) emissions from natural gas production and use. With this optical gas imaging camera, inspectors can check thousands of components and see potential gas leaks in real-time. The GF320 is lightweight, offers both a viewfinder and LCD monitor, and has direct access to controls. Embedded GPS data helps in identifying the precise location of faults and leaks, for faster repairs.
-
Renesas Electronics Corp.
Renesas offers a complete portfolio of system supervisory solutions ranging from single to quintuple (five) voltage monitors. In addition, the system management ICs are voltage monitors with small amounts of I2C or SPI software programmable EEPROM memory. Renesas single-chip sequencing solutions sequence up to four different voltages while providing other useful features such as voltage monitoring, fault protection, and reset assertion.
-
MGS-408 -
Bacharach, Inc.
Bacharach’s MGS-408 Gas Detection Controller centralizes the status of up to 8 gas detection channels in a single location. The digital display provides a real-time view of the gas concentration and status at each gas detection point. It also allows for the controller to be configured in minutes vie the intuitive menu system. A bank of LEDs corresponds to each connected gas detector; showing power, alarm status and fault indicators.
-
GDJB -1200 -
HV Hipot Electric Co.,Ltd.
Relay Protection microcomputer test device play a key role in operating electricity power systems reliably and safely.It is the testing device used in professional field of microcomputer protection,relay protection,excitation measurement,fault recorder.