Filter Results By:

Products

Applications

Manufacturers

IEEE

Institute of Electrical and Electronics Engineers

See Also: Standards, IEC


Showing recent results 346 - 360 of 380 products found.

  • Bluetooth® Testing

    TUV Rheinland Inc

    Bluetooth® technology is a global wireless standard which allows convenient and secure connectivity over short distances for many devices, such as computers, laptops, cell phones, cameras, networks and medical equipment.The technology uses short-wavelength UHF radio waves to exchange data between two devices and is based on the IEEE 802.15.1 Wireless Networking Standard.In order to ensure reliability, quality and safety, TÜV Rheinland provides high-quality Bluetooth® testing services to qualify and list Bluetooth® hardware and software components and products. Our experts have the knowledge to assist you in all of your Bluetooth® testing and certification requirements, guaranteeing you reliable and secure Bluetooth® devices.

  • Day/Night IP Surveillance Camera

    ENVIROMUX-IPCAM-N - Network Technologies Inc

    View and control the camera from the ENVIROMUX web interface, the camera web interface, included software, or with a compatible cell phone. With the ENVIROMUX-2D/5D/16D, a triggered snapshot can be forwarded in alert e-mails. A snapshot can be triggered by any programmed event (motion detection, door open/close, glass break, smoke, liquid detection, etc.). Image sensor: 1/4" progressive scan CMOS sensor. Video Streaming: simultaneous Motion JPEG and MPEG-4. Frame rate: 30fps at 640x480 (VGA) resolution. Lens: F2.0, 4.3 mm (0.17 in), 12 infrared LEDs for night vision. RJ45 connector. Wireless models: wireless IEEE 802.11 b/g up to 54 Mbps. Regulatory approvals: CE, FCC, RoHS.

  • DSP Starter Kit

    Spectrum Digital, Inc

    Embedded USB JTAG controller with plug and play drivers, USB cable includedTLV320AIC codec2M x 32 on board SDRAM512K bytes of on board Flash ROM3 expansion connectors (Memory Interface, Peripheral Interface, and Host Port Interface)On board IEEE 1149.1 JTAG connection for optional emulator debugFour 3.5 mm. audio jacks (microphone, line-in, speaker, and line out)4 user definable LEDs4 position dip switch, user definable+5 Volt operation only, power supply includedSize: 8.25" x 4.5" (210 x 115 mm), 0.062" thick, 6 layersCompatible with Spectrum Digital's DSK Wire Wrap Prototype CardRoHS Compliant

  • ETN 19" RACK MNGD 24 10/100 (2)10/100/10000 OR SFP GIGABIT

    ESWG726-2SFP - B+B SmartWorx

    Light industrial design EN61000-6-1 specifications-10 to 60°C or -40 to 75°C (-T models) temperature ratingSupports IEEE 802.3 10Base-T,802.3u 100Base-TXRJ-45 port supports auto MDI/MDI-X functionSC Single mode and Multi mode fiber connectorsGigabit options with copper and SFP combo portsWeb Browser Management and ConfigurationRingOn redundant rapid recovery systemRapid Spanning Tree Protocol recover systemIGMP with Query mode for multimedia applicationPort based VLAN / 802.1 Q Tag VLANRelay alarm output for system eventsPort mirroring for diagnostics256K bytes packet buffer8k MAC address table18 to 36 VDC power input19-inch rack 1U height100% burn in testing5 year warranty

  • ETN 19" RACK MNGD 24 10/100(2)10/100/1000 OR SFP GIGABIT -40° to 75°C

    ESWG726-2SFP-T - B+B SmartWorx

    Light industrial design EN61000-6-1 specifications-10 to 60°C or -40 to 75°C (-T models) temperature ratingSupports IEEE 802.3 10Base-T,802.3u 100Base-TXRJ-45 port supports auto MDI/MDI-X functionSC Single mode and Multi mode fiber connectorsGigabit options with copper and SFP combo portsWeb Browser Management and ConfigurationRingOn redundant rapid recovery systemRapid Spanning Tree Protocol recover systemIGMP with Query mode for multimedia applicationPort based VLAN / 802.1 Q Tag VLANRelay alarm output for system eventsPort mirroring for diagnostics256K bytes packet buffer8k MAC address table18 to 36 VDC power input19-inch rack 1U height100% burn in testing5 year warranty

  • ETN 19" RACK MNGD 26 10/100

    ESW726 - B+B SmartWorx

    Light industrial design EN61000-6-1 specifications-10 to 60°C or -40 to 75°C (-T models) temperature ratingSupports IEEE 802.3 10Base-T,802.3u 100Base-TXRJ-45 port supports auto MDI/MDI-X functionSC Single mode and Multi mode fiber connectorsGigabit options with copper and SFP combo portsWeb Browser Management and ConfigurateionRingOn redundant rapid recovery systemRapid Spanning Tree Protocol recover systemIGMP with Query mode for multimedia applicationPort based VLAN / 802.1 Q Tag VLANRelay alarm output for system eventsPort mirroring for diagnostics256K bytes packet buffer8k MAC address table18 to 36 VDC power input19-inch rack 1U height100% burn in testing5 year warranty

  • ETN 19" RACK MNGD 26 10/100 -40° to 75°C

    ESW726-T - B+B SmartWorx

    Light industrial design EN61000-6-1 specifications-10 to 60°C or -40 to 75°C (-T models) temperature ratingSupports IEEE 802.3 10Base-T,802.3u 100Base-TXRJ-45 port supports auto MDI/MDI-X functionSC Single mode and Multi mode fiber connectorsGigabit options with copper and SFP combo portsWeb Browser Management and ConfigurateionRingOn redundant rapid recovery systemRapid Spanning Tree Protocol recover systemIGMP with Query mode for multimedia applicationPort based VLAN / 802.1 Q Tag VLANRelay alarm output for system eventsPort mirroring for diagnostics256K bytes packet buffer8k MAC address table18 to 36 VDC power input19-inch rack 1U height100% burn in testing5 year warranty

  • Optical Line Terminal

    OLT-4PON - Hangzhou Softel Optic Co., Ltd.

    Compatible with the international standard GEPON IEEE 802.3ah, IEEE802.3-2005. ● Compatible with the standard of China Telecom EPON V2.1 version.● High reliability: Redundancy Backup for power supply● Good intercommunication and compatibility: support to communicate with other chip ONU and expand OAM management● Plug and play for all modules in OLT system● Advanced layer 2 switch technology● SLA and QoS ● Powerful OAM: support the remote management● Support status detection and fault report● Support to save configured parameters if power down● Support to configure the work mode of user port(ONU), and auto-detection of MDI-MDIX● Supports data encryption and decryption● Support 802.1Q VLAN● Supports the remote reset and reboot

  • TTEDevelopment System A664 For VxWorks 653

    TTTech Computertechnik AG

    The TTEDevelopment System A664 supporting the ARINC 653 interface is an out-of-the box starter kit for integrating TTEthernet’s deterministic network technology with the time and space partitioned real-time operating system VxWorks 653. The easy-to-use and ready-to-run solution includes hardware and software as well as a Distributed IMA demo application showing deterministic communication among the different real-time operation system partitions. The system supports up to 1 Gbit/s speed, enables event-driven Ethernet (IEEE 802.3) as well as rate-constrained (ARINC 664 part 7) and hard real-time (Time-Triggered Ethernet SAE AS6802) communication on the same network with the option to synchronize IMA modules using the fault-tolerant TTEthernet network time base.

  • Wireless Day/Night IP Surveillance Camera

    ENVIROMUX-IPCAM-WN - Network Technologies Inc

    View and control the camera from the ENVIROMUX web interface, the camera web interface, included software, or with a compatible cell phone. With the ENVIROMUX-2D/5D/16D, a triggered snapshot can be forwarded in alert e-mails. A snapshot can be triggered by any programmed event (motion detection, door open/close, glass break, smoke, liquid detection, etc.). Image sensor: 1/4" progressive scan CMOS sensor. Video Streaming: simultaneous Motion JPEG and MPEG-4. Frame rate: 30fps at 640x480 (VGA) resolution. Lens: F2.0, 4.3 mm (0.17 in), 12 infrared LEDs for night vision. RJ45 connector. Wireless models: wireless IEEE 802.11 b/g up to 54 Mbps. Regulatory approvals: CE, FCC, RoHS.

  • Serial-to-Daq Minibox

    Model 2367 - ICS Electronics

    * 2367 provides 32 digital I/O lines, 4 analog outputs, 6 analog inputs, 6 relay driver outputs and 4 temperature inputs.* Firmware supports ASCII command strings, Addressed commands for RS-485 networks and packet protocol. * Operates as a RS-232 as a RS-485 to Data Acquisition Module. * DB-25 connector has both RS-232 and RS-485 signals.* SCPI commands and IEEE 488.2 compatibility provide GPIB like operation over the serial link. * The 2367 is packaged in a CE approved Minibox™ metal case to minimize EMI/RFI. * 1 U high Rack Mounting Kit mountsone or two 4867s.* Plug-on Terminal Board simplifies wiring connections.* Includes Universal Power Adapter and 62-pin mating connector.

  • PSE Conformance Test Suite for 4-Pair 802.3bt PSE's

    PSA-CT4P - Sifos Technologies, Inc.

    Whether testing single port injectors or 48 port PSE’s, Sifos offers the ultimate solution to assess PSE conformance to all applicable IEEE specifications. With the click of a button, fully automated testing and reporting delivers comprehensive and informative results including difficult-to-spot intermittent conformance behaviors. • Robust 4-Pair 802.3bt (Type-3,4) PSE Conformance Testing• Fully Automated Port Sequencing and Statistics - Test up to 24 ports with the PSA-3000• Catch Both Repeatable and Intermittent Specification Compliance Issues• Greater than 92% 802.3bt PICS Coverage from 24 Fully Automated Tests• Pop-Up Excel Reports Covering 1 to 24 Ports• Widely Used by PSE System and Silicon Manufacturers World Wide

  • Battery Capacity Tester

    BLU-T Series - IBEKO Power AB

    Battery load bank BLU-T is a powerful and lightweight solution designed for condition assessment of telecommunication and radio equipment backup supply. This instrument can perform the battery capacity test on battery strings such as Pb, Li-ion, Ni-Cd, and others. It tests battery strings with voltages in the range of 0,9 – 70,5 V DC. As a special feature, the BLU110T model enables capacity testing of single PB, Ni-based as well as Li cells (with current up to 100 A).The capacity test is conducted in an accurate, user-friendly way. Also, it is in accordance with battery testing standards: IEEE 450-2010, IEEE 1188-2005, IEEE 1106-2015, IEC 60896-11/22, and other relevant standards.BLU-T battery load bank enables setting the discharge current up to 350 A, with 0,1 A resolution. If higher currents are required, the BLU-T units can be connected in parallel, or BXL-T additional load units can be linked.The instrument offers a high power-to-weight ratio. BLU-T series has models starting from 12,8 kg / 28.2 lbs and up to 19,2 kW of power.A user can select one of three discharge modes: Constant current, Constant power, Constant resistance. Additionally, different battery duty cycles can be simulated using user-selectable discharge profiles.Discharge parameters can be monitored in real-time during the capacity test. A 4,3-inch touch screen shows overall battery voltage, discharge current, discharge test time and capacity during the entire test. Also, the capacity tester is compatible with DV-B Win software. A user can view a detailed numerical and graphical presentation of key parameters, and create reports in various formats.Testing can be carried out without disconnecting the battery from the service.

  • GPIB Hardware

    PXI-8232 - NI

    Gigabit Ethernet, IEEE 488 PXI GPIB Instrument Control Module—The PXI‑8232 combines a high-performance GPIB controller and a Gigabit Ethernet port into a single-slot module. You can use this module to integrate non-PXI instruments into a PXI system. The PXI‑8232 takes advantage of the Intel 82540EM Gigabit Ethernet controller. The 1,000 Mbit/s Gigabit Ethernet transfer rate provides a substantial performance increase over the Fast Ethernet transfer rate while remaining compatible with 10BASE‑T and 100BASE‑TX Fast Ethernet networks. You also can use the Ethernet port on the PXI‑8232 as an EtherCAT master, which is programmed with the NI‑Industrial Communications for EtherCAT software in LabVIEW. This module includes a license for the NI‑488.2 driver software, providing maximum reliability for connecting to third-party instruments with GPIB.

  • Ultra Low Power Radios

    IoT - Silex Technology

    IEEE 802.11b/g/n-compliant Wi-Fi Radio (2.4 GHz)Ultra-low-power hostless Wi-Fi IoT Module features QCA4010 RadioSingle Stream System (1x1), 20 MHzIntegrated RF front end and PCB trace antennaHostless IoT application development platform with large internal memoryUART AT command set for optional external MCU hostAllJoyn supportWi-Fi Protected Setup SupportIPv4 / iPv6, TCP and UDP Protocol Supported on Chip, Offloading the Host ControllerIdeal for cost effective Internet of Things (IoT) Applications