Filter Results By:

Products

Applications

Manufacturers

IEEE

Institute of Electrical and Electronics Engineers

See Also: Standards, IEC


Showing recent results 361 - 375 of 380 products found.

  • 2-port/4-port GigE PCI Express Card

    AX92322 - Axiomtek Co., Ltd.

    The AX92322 is a GigE compliant PCI Express card supporting two or four independent Gigabit Ethernet ports. It features PCI Express x4 interface and has four powerful independent Intel® Ethernet Controller i210-AT. The GigE frame grabber card supports 9.5KB Jumbo Frame and IEEE 1588 to enable faster and more accurate throughput of data. The AX92322 is built for machine vision and surveillance applications in industrial IoT field. This PCI Express frame grabber card is designed to help customers develop and deploy machine vision and surveillance applications which will greatly benefit through reduce the cost and simplify system integration. Moreover, the AX92322 has a wide operating temperature of 0˚C to 70°C, making it suitable to be used in most server environments. The advanced GigE frame grabber runs on Windows® 7, Windows® 10 and Linux.

  • Target Boards

    C5000 - Spectrum Digital, Inc

    Selectable Core Voltages (1.2V, 1.4V, 1.6V)Power Capture for Core, I/O, and board current via onboard National Instruments USB power monitor interfaceCPU clock frequency measurementUser USB port via VC5509AEmbedded USB JTAG controller with plug and play, USB cable includedTLV320AIC23B codec8 Megabytes SDRAM512K bytes of on board Flash ROM3 expansion connectors (Memory Interface, Peripheral Interface, and Host Port Interface)On board IEEE 1149.1 JTAG connection for optional emulator debugFour 3.5 mm. audio jacks (microphone, line-in, speaker, line-out)4 user definable LEDs4 position dip switch, user definable+5 Volt operation only, power supply includedSize: 8.25" x 4.5" (210 x 115 mm), 0.062" thick, 6 layersCompatible with Spectrum Digital's DSK Wire Wrap Prototype CardRoHS Compliant

  • Power System Recorder with CDR , PMU and IEC 61850 station bus protocol

    TESLA 4000 - ERLPhase Power Technologies Ltd

    The new TESLA 4000 is an intelligent, state of the art, user-friendly multi-timeframe dynamic power system recorder with advanced Phasor Measurement Unit (PMU) and Continuous Disturbance Recording (CDR) capabilities. Wide area swing recording accomodates system performance analysis in minutes Meets NERC continuous disturbance recording standards with non-volatile on board flash memory No mechanical moving parts – flash drive eliminates most common mode of failure in recorders. Each flash drive holds 1000 records. IEEE C37.118-2005 SynchroPhasor Standard

  • Fast and Flexible WLAN Measurements up to 802.11ax

    WLAN Test Toolkit - NI

    The WLAN Test Toolkit gives you direct and fine control over the generation and analysis of IEEE 802.11a/b/g/n/ac and ax signals, as well as 802.11j/p/ah/af waveforms, with industry-leading speed and accuracy. It empowers you to characterize, validate, and test a variety of WLAN connectivity products, such as RF front end components, wireless modules, and user devices.The toolkit includes extensive support for the latest features of the 802.11ax standard, including extended single-user packets, multiuser OFDMA, and multiuser multiple input, multiple output (MIMO) functionality with per-user configuration and measurement results. The WLAN Test Toolkit helps you solve demanding new access point test cases by generating signals that simulate multiuser environments, including per-user impairments. You can also use the new software to generate trigger frames to test the real-time response of client devices and make power precorrection and relative center frequency measurements.

  • Laser M² Measuring System

    MS-1780 - Ophir Photonics

    The ModeScan Model 1780 is a laser beam profiling instrument that measures the M² Beam Propagation Ratio and all associated ISO 11146 parameters instantaneously in real time at video rates to over 20Hz. The measurement technique, patented by Photon Inc., uses 10 reflective surfaces to form simultaneous images of the propagating beam at 10 locations on a Model 2512 CCD array camera. With all ten measurement positions acquired at once, the instrument is suitable for measurement of both CW and pulsed lasers down to single-shot rates. Beam diameters are obtained to better than 2% using the BeamPro software. This translates to M² measurements with accuracy to ~5%. The FireWire system operates under Photon’s BeamPro in Microsoft Windows. The compactness of the system and the IEEE 1394a FireWire interface offers enhanced ease-of-use and portability. The ability to operate in any orientation allows for easy placement on any optical bench and saves valuable bench space.

  • Non-steady-state probe for thermal conductivity measurement

    TP02 - Hukseflux Thermal Sensors B.V.

    TP02 is a probe that offers the possibility to perform a practical and fast measurement of the thermal conductivity (or thermal resistivity) of the medium in which it is inserted at the highest accuracy level. It works in compliance with the ASTM D 5334-00, D 5930-97 and IEEE 442-1981 standards. The standard TP02 probe has proven suitability in soils, thermal backfill materials, sediments, foodstuff, powders, sludges, paints, glues and various other materials. The Non-Steady-State Probe (NSSP) measurement method (also known as transient line source, thermal needle, hot needle, heat pulse- and hot wire technique) has the fundamental advantages that it is fast and absolute while the sample size is not critical. Hukseflux is specialised in NSSP design. Special models have been developed for in-situ field experiments. For permanent installation in soils, a dedicated model, TP01, is available. TP02 has been designed and tested in collaboration with the Applied Physics Group of Wageningen University.

  • LLDP Emulation & Analysis

    PSA-LLDP & PSL-LLDP - Sifos Technologies, Inc.

    The optional LLDP Emulation feature allows a PSA-3000 or PSL-3000 test port to behave just like an 802.3at or 802.3bt PD that uses LLDP to convey its power demands. 802.3 PoE LLDP is a special variant of LLDP protocol that involves handshakes and protocol timing between a PSE and a PD. 802.3at and 802.3bt PD Emulation and Protocol Analysis:• Integrated PoE LLDP and Load Emulation in a Single Instrument• IEEE 802.3at and 802.3bt LLDP Compliance Analysis• Independent, Per-Port 802.3at and 802.3bt LLDP Emulations• Flexible Single and Dual Signature PD LLDP Emulations• One-Click LLDP Protocol Capture and Analysis• Pop-Up Excel Spreadsheet Reports Assess Protocol Content and Timing• Enables One-Click Emulated Power-Ups and Standard Waveforms with LLDP Power Granting PSE's• Enables 2-Pair and 4-Pair PSE Conformance Test Suties with LLDP Capable PSE's• Enables 2-Pair Multi-Port Suite with LLDP Capable PSE's• Available for PSA-3000 and PSL-3000 Platforms

  • ND1 NDF/NDR interface

    kronback tracers

    The Kronback Tracers ND1 is placed in the CCAP CORE for NDF/NDR - narrowband digital forward/return interfacing. It consists of a NDF channel (70 to 1218 MHz) and multiple NDR channels (5 to 204 MHz). The NDF channel transmits one narrowband range to the RPD up to 25,6 MHz, including the full FM band 87.5 to 108 MHz. The NDR receives up to three narrowband signals from the RPD with a bandwidth up to 5,12MHz These three bands can be placed agile in the full return path spectrum from 5 to 204 MHz, and can be digitally combined from up to 16 simultaneous RPD inputs. The ND1 can also receive FFT spectrum data from the RPD, turning the ND1 in to a fully featured return path monitoring system. Because the ND1 has a multi channel FSK demodulation functionality, it offers full HMS gateway (HMTS) operation. The ND1 can be synchronized from a local 10 MHz input or from IEEE 1588 PTP network protocol.

  • Compact PowerSync Analyzer

    PSA-3402 - Sifos Technologies, Inc.

    Sifos Technologies offers the PowerSync® Analyzer Compact PSA-3402 supporting the world’s most comprehensive and automated PSE Conformance Test Suites covering PSE’s that power up to 30W on 2-pairs and up to 90W on 4-pairs. Compact and transportable configuration supporting PSE Conformance Test Suite and LLDP Emulation and Analysis options. Key Features:• Continuous 2-Pair Loading > 47 Watts Per PSE Port• Continuous 4-Pair Loading > 99 Watts Per PSE Port• Industry Leading IEEE 802.3 PSE Conformance Tests• Unique, Fully Automated Multi-Port PSE System Analysis for 802.3at• Flexible 802.3at & 802.3bt Powered Device Emulation​• One-Click 2-Pair and 4-Pair PSE Waveform Analysis• Flexible PoE LLDP Emulation and LLDP Protocol Analysis• Flexible and Accurate Measurements of Voltage and Current• Noise Immune Triggering and Flexible Load Transients• Ethernet 10/100 Control Interface• Smart Fan Control – Runs Cool and Quiet​• Comprehensive Safety and RF Certifications​

  • PowerSync Analyzer

    PSA-3000 - Sifos Technologies, Inc.

    Sifos Technologies offers the PowerSync® Analyzer PSA-3000 multi-slot chassis support the world’s most comprehensive and automated PSE Conformance Test Suites covering PSE’s that power up to 30W on 2-pairs and up to 90W on 4-pairs. Connects up to 24x PSE ports and provides access to the PSE Conformance Test Suite, the Multi-Port Suite, and LLDP Emulation and Analysis.Key Features• Continuous 2-Pair Loading > 47 Watts Per PSE Port• Continuous 4-Pair Loading > 99 Watts Per PSE Port• Industry Leading IEEE 802.3 PSE Conformance Tests• Unique, Fully Automated Multi-Port PSE System Analysis for 802.3at• Flexible 802.3at & 802.3bt Powered Device Emulation​• One-Click 2-Pair and 4-Pair PSE Waveform Analysis• Flexible PoE LLDP Emulation and LLDP Protocol Analysis• Flexible and Accurate Measurements of Voltage and Current• Noise Immune Triggering and Flexible Load Transients• Ethernet 10/100 Control Interface• Smart Fan Control – Runs Cool and Quiet​• Comprehensive Safety and RF Certifications​

  • Micro-Ohmmeters

    IBEKO Power AB

    Contact resistance measurement is one of the most important and common tests during switchgear manufacturing, commissioning and maintenance stages. Besides switchgear testing, the RMO digital micro-ohmmeters are designed for simple, safe and efficient testing of:disconnecting switches,high-current bus bar joints,cable splices,welding joints,and different high-current links in factory and high-induction field environments.All DV Power RMO micro-ohmmeters use Kelvin’s 4-point measurement principle which is the most convenient for very small resistance measurements. The measurements are accurate and in accordance with international standards for AC high-voltage circuit breakers testing (IEEE C37.09 and IEC 62271-100).Starting from 2003, DV Power has been a trend-setter on the market when our first 500 A micro-ohmmeter weighing only 8 kg (RMO500A / CPM500) was released.Currently, DV Power products portfolio includes 16 models, divided into 3 series:13 portable models: RMO-A (6) and RMO-G (7) series.6 handheld models: RMO-H (6) seriesThe instruments generate a user-selectable and ripple-free test current up to 800 A in an automatically regulated test ramp. Test current ramping significantly decreases the influence of the magnetic transients to measurement.

  • PXI Module

    QT-PXI-95 - Qmax Test Technologies Pvt. Ltd.

    Qmax QT-PXI-95 is new generation PXI module designed to provide test solution for both Boundary Scan compliance devices and Non-Boundary scan devices. The system is provided with programmable Bi-directional Digital IO channels which are capable of drive and receive as per IEEE standard compliance and is fully synchronized with JTAG port pins. The use of virtual test pins and edge connector eliminates the need for expensive test fixture strategy. It employs unique continuous mode drive which reduces the testing time drastically and algorithm of bypassing specific set of channels to minimize the scan time is a supplementary enhancement included for best results. The Bidirectional IO digital channels can be used as functional test channels in Test Program Set (TPS) environment using edge connector as well. The expandability of digital IO channels per requirement based on number of slots in the PXI chassis in steps is a real value add to the module at all timesmedication to terminate pregnancy abortion aspiration where do you have an abortiondrug coupon card liberitutti.info internet drug couponsfree prescription cards blog.brunothalmann.com pfizer coupons for viagralisinopril and uric acid lisinopril and uric acid lisinopril and uric aciddiflucan 200 site diflucan 200imodium plus reviews fem-choice.com imodium spc

  • Load Cell Transmitter

    MODEL SST-HV - Transducer Techniques, Inc

    The SST-HV is a Plug & Play Smart TEDS IEEE 1451.4 compliant Transmitter. Just plug in a TEDS compatible Load Cell or Torque Sensor and the SST-HV will automatically self-calibrate. When used with a non-TEDS Load Cell or Torque Sensor, the SST-LV Transmitter is easily programmed using a PC with an RS232 port and Instrument Setup (IS) software, which provides a graphical user interface. The SST-HV may be powered from 95-240 Vac ±10%. The SST-HV has an Isolated transducer excitation output that is selectable between 5Vdc or 10Vdc. There are Dual solid state relays and an Isolated 4-20 mA, 0-20 mA or 0-10V analog output. There are three Isolated serial data transmitter output ( RS232 , Half-duplex RS485, full-duplex RS485 ) and three serial protocols that are software selectable (Modbus RTU, Modbus ASCII and Custom ASCII). Isolation to 250V rms is provided for power, signal input, analog output, relay outputs, and communications. Isolation adds safety and avoids possible ground loops. The transducer excitation output is isolated to 50V from signal ground.

  • Load Cell Transmitter

    MODEL SST-LV - Transducer Techniques, Inc

    The SST-LV is a Plug & Play Smart TEDS IEEE 1451.4 compliant Transmitter. Just plug in a TEDS compatible Load Cell or Torque Sensor and the SST-LV will automatically self-calibrate. When used with a non-TEDS Load Cell or Torque Sensor, the SST-LV Transmitter is easily programmed using a PC with an RS232 port and Instrument Setup (IS) software, which provides a graphical user interface. The SST-LV may be powered from 12-30 Vac or 10-48 Vdc. The SST-HV Has an Isolated transducer excitation output that is selectable between 5Vdc or 10Vdc. There are Dual solid state relays and an Isolated 4-20 mA, 0-20 mA or 0-10V analog output. There are three Isolated serial data transmitter output ( RS232 , Half-duplex RS485, full-duplex RS485 ) and three serial protocols that are software selectable (Modbus RTU, Modbus ASCII and Custom ASCII). Isolation to 250V rms is provided for power, signal input, analog output, relay outputs, and communications. Isolation adds safety and avoids possible ground loops. The transducer excitation output is isolated to 50V from signal ground.

  • Digital Panel Mount Load Cell Meter

    MODEL DPM-3 - Transducer Techniques, Inc

    The DPM-3 is a smart Plug & Play TEDS IEEE 1451.4 compliant Digital Panel Mount Load Cell meter. Just plug in a TEDS compatible Load Cell or Torque Sensor and the DPM-3 will automatically self-calibrate. When used with a non-TEDS Load Cell or Torque Sensor, the DPM-3 can be set up by simple front panel push buttons. The DPM-3 can be scaled to a full 5 digit display from 0 to 99,999 counts to read directly in engineering units such as grams, ounces, pounds, etc. The DPM-3 samples 60 readings per second (50 for 50Hz operation) for fast control response and true peak/valley reading capability. The meter has an adaptive digital filter that can automatically select the best time constant for minimum noise, yet respond rapidly to an actual change in signal level. The peak and valley values can be displayed by a push of a button on the front panel. Auto-tare allows the meter to be set to zero for any input signal level. Available options include dual relays, analog output, serial communications, and low voltage power supply.