hide

Filter Results By:

Products

Applications

Manufacturers

Show Filters

Showing results: 7501 - 7515 of 17066 items found.

  • MIL-STD-1553 IRIG 106 Chapter 10 Streaming Application

    F-SIM-1553-CH10-STREAM - Avionics Interface Technologies

    Streams MIL-STD-1553 Data from AIT MIL-STD-1553 interfaces in Chapter 10 Format - Software application which is Compatible with all AIT MIL-STD-1553 Interfaces - Capable of streaming data captured from one or multiple MIL-STD-1553 Bus Interfaces - Streamed data can be sent to a single network system or multicast on the Ethernet LAN - Compatible with AIT F-SIM-1553-AVOE analyzer or 3rd party Chapter 10 systems - Timestamps & Errors detected embedded in Chapter 10 stream

    Product Home Contact/Sales Distributors/Reps Company Catalog Add To List

  • Software Communications Architecture (SCA) Development Environment

    NordiaSoft

    NordiaSoft products enable embedded systems developers to rapidly create software artifacts using the Component Based Development (CBD) and Model Driven Engineering (MDE) paradigms. Implementing the Software Communications Architecture (SCA), an open specification adopted internationally and evolved through the Wireless Innovation Forum (WInnF), a consortium of major radio manufacturers, academic, research laboratories and government authorities, the NordiaSoft products provide multiple advantages over other commercially available solutions for embedded systems:

    Product Home Contact/Sales Company Catalog Add To List

  • Time Measurement Equipment

    TimeSpy - Brandywine Communications

    The TimeSpy precisely measures the time accuracy of a wide range of inputs (such as: NTP, IRIG B, 1PPS, and ASCII) against an internal precision GPS-controlled oscillator, displayed on the large, full color windows-based touch screen. The TimeSpy can precisely measure the time error at the point of use for systems where time is distributed over large distances. The TimeSpy can also measure free-running clocks and timing systems which are synchronized from untraceable sources, such as television and radio broadcasts, electrical power lines and the internet.

    Product Home Contact/Sales Distributors/Reps Company Catalog Add To List

  • Specialty Products

    DiagLink - Autel

    Besides providing safe replacement and recalibration of brake pads for modern vehicles with EPB systems, the DiagLink device also offers the most convenient oil service reset functions. As a specialized diagnostic tool for DIY users and technicians of service workshop, DiagLink supports the diagnosis for all electronic systems of makes and models compliant with OBD II/EOBD and CAN. This compact handheld device enables you to accurately diagnose complex problems and makes your vehicle service experience much easier!

    Product Home Contact/Sales Manual Company Catalog Add To List

  • RF.SPICE A/D

    EMAG Technologies Inc..

    RF.Spice A/D™ is a powerful visual simulation environment for analysis and design of analog, digital, RF and mixed-signal circuits and systems. Rather than verifying your circuit designs after the fact using real physical components with expensive laboratory test equipment, RF.Spice A/D allows you to perform accurate and realistic simulations of your circuits without clipping wires or splashing solder. With RF.Spice A/D, creating, modifying and simulating electronic circuits and systems is a quick, easy, even enjoyable, process.

    Product Home Company Catalog Add To List

  • Video Inspection Station

    VIS300 - MicroImage Video Systems

    Video Inspection Stations are available with?or without on-screen measurement capabilities?and offer?an excellent way to evaluate or test small works or items in?difficult to access locations.? As todays electronic and mechanical systems keep getting smaller, it becomes impossible to test or measure these products with traditional methods. For many applications, from development to production testing, video based inspection can help maintain quality control. Many of these systems are used in labs for development or used in production for testing production samples.

    Product Home Contact/Sales Distributors/Reps Company Catalog Add To List

  • Multi-Channel Carrier Demodulator

    CD280 - Validyne Engineering

    The CD280 Carrier Demodulator is a complete multi channel system in a small package which houses a plug-in power supply and 4 carrier demodulator circuit boards. The power supply provides regulated 5 Vac 5 kHz carrier power for Variable Reluctance and LVDT transducers , and the carrier demodulators demodulate and amplify the input signals to a 10 Vdc full-scale output. Zero and span adjustments are available for each channel. The system operates from 115 Vac, 50 to 400 Hz, line power.

    Product Home Contact/Sales Distributors/Reps Datasheet Company Catalog Add To List

  • Refrigerant Leak Detector

    Extech RD300 - Extech Instruments Corporation

    The RD300 Refrigerant Leak Detector detects leakages from air-conditioning units and cooling systems. It's easy to use and is ideal for detecting leaks from air-conditioning units and cooling systems that use all standard refrigerants. The multi-colored LED light bar indicates the level of leaking refrigerant detected by the RD300. The built-in, bright LED convenience light located at the sensor tip illuminates dimly lit inspection areas. Complete with leak test bottle, 9V battery, and protective hard carrying case.

    Product Home Contact/Sales Distributors/Reps Company Catalog Add To List

  • Test, Map, Profile and Qualify "Dark" Coax Cable Networks

    Coax Clarifier - T3 Innovation

    Dark unpowered coax systems give no clue as to their design, condition or configuration. The new Coax Clarifier by T3 Innovation makes it simple and easy to discern the layout of a coax network, locate faults on individual cable runs, identify remotes through splitters, and determine cable run length. In addition, separate wiremapping sets allow a technician to map out the entire coax system and measure the quality and characterization of the overall network for carrying services, such as high grade video, surveillance data and HD programming.

    Product Home Contact/Sales Distributors/Reps Manual Company Catalog Add To List

  • PXI Single 46x4 Matrix, 1 Pole Switching

    40-524-021 - Pickering Interfaces Ltd.

    Medium density PXI dual 46x4, 1-pole matrix - it is also available inreed relay formats of 2-pole and 1-pole screened (see "also in this range" on right). The screened version is suitable for switching signals up to 50MHz. Typical applications include signal routing in ATE and data acquisition systems. The two banks may be used for operating a 4-wire measurement system (bank-1 for source, bank-2 for measure). Larger matrices may be constructed by daisy chaining the common signals from multiple PXI Modules.

    Product Home Contact/Sales Distributors/Reps Datasheet Company Catalog Add To List

  • NSOM & SNOM SPM

    Nanonics Imaging Ltd.

    NSOM Is the premier tool for imaging and manipulation of light on the nanoscale and is a critical instrument for understanding plasmonics, photonic waveguides, photovoltaic and photoconductivity studies. The optical openness of the NSOM system permits any illumination scenario while the Multiprobe NSOM head offers optical transport and dynamic study on the nanoscale for the first time. Offering a variety of options from entry level to low-temperature systems, the MultiView NSOM series has been the platform of choice for imaging on the nanoscale for nearly two decades.

    Product Home Contact/Sales Company Catalog Add To List

  • Current Transformer Comparator

    ZERA® WM3000I - Powermetrix Systems

    The current measuring comparator WM3000I is a high-precision device for comparing secondary outputs from a current transformer under test (or digital output of Electronic CTs or Digital CTs) with a reference signal supplied by a standard transformer primary. The resulting error value will be displayed as ratio error and phase error on the screen. The operation of the comparator will be performed via an integrated 10.1” capacitive touch screen or controlled by PC software. The WM3000I is compatible with existing systems, like Knopp, and exports a data output for active database systems.

    Product Home Contact/Sales Distributors/Reps Company Catalog Add To List

  • High Performance LXI Microwave Multiplexers

    Pickering Interfaces Ltd.

    Pickering's LXI Microwave Multiplexers offer the highest density microwave multiplexer configurations possible, packaging 16 multiplexers into a 2U high rack. All versions of this multiplexer have an extremely high level of performance, offering low VSWR, high isolation, low loss and high power handling. Occupying only 2U of valuable rack space - our microwave multiplexers provide a space saving solution for systems requiring high performance multiplexers in the construction of microwave switching systems.

    Product Home Contact/Sales Distributors/Reps Company Catalog Add To List

  • HVAC/R Environmental Meter

    FLIR EM54 - Teledyne FLIR

    The FLIR EM54 is ideal for inspecting and troubleshooting HVAC/R ducting systems within residential, commercial, and industrial facilities. This meter can help you verify that duct inlets and outlets have the specified volumetric flow – a prerequisite to an efficient functional system. Featuring humidity, wet bulb, and dew point functions, the EM54 can measure deviations from proper relative humidity levels. Plus, the included Type-K contact temperature probe is useful to check electric motors and thermal equipment components for proper operating temperatures.

    Product Home Contact/Sales Company Catalog Add To List

  • Load Cells

    Force Logic UK Ltd

    Force Logic UK provides high-quality load cells, load indicators, and force measurement systems for a variety of industries. All our load cells are manufactured in the UK, and have passed through rigorous quality control standards for precise and accurate measurement, load monitoring systems, and industrial weighing applications. They are suitable for the measurement of static loads and dynamic forces in tension or compression, our load cells cover a wide range of mechanical forces, from 1kg to 1000 tonnes.

    Product Home Contact/Sales Company Catalog Add To List
Get Help