Filter Results By:

Products

Applications

Manufacturers

Showing results: 6991 - 7005 of 17066 items found.

  • Flying Probe Tester

    Pilot 4D M4 - SEICA SpA

    The Pilot 4D M4 is a full-performance, double-sided, flying probe test system with an extremely high level of flexibility, making it the ideal solution for those with a wide variety of testing needs, from prototypes to small/medium production volume, through the repair of field returns and reverse engineering. The vertical, compact architecture and the excellent board clamping system ensure that there is no oscillation of the board under test, which in turn greatly facilitates the precise positioning of the probes on the test points.

  • Load Cells

    VPG Transducers

    The heart of each weighing system is a load cell. Load cells are mechanical components which act as force sensors by employing strain gages to provide an electrical output proportional to the applied force. Typically the electrical output is either analog (voltage or current) or digital. Load cells have specific mechanical packaging and sensing orientation to fit into electronic scales, and testing and monitoring systems. Load cells can be used for tension, compression, and/or shear measurement.

  • Load Banks

    Power Test, Inc.

    Power Test Dynamometer offers a complete high capacity load testing solution with our load bank and gen set testing systems. Capable of testing generators and AC/DC power sources, our load bank systems safely apply electrical loads across the entire spectrum of operation. By offering a one-stop-shop for your Load Bank and it's accompanying data acquisition software, Power Test is committed to Making Your Testing Easy.

  • Ion Chromatography

    Eco IC - Metrohm AG

    Discover Eco IC, an ion chromatography system that focuses on the essentials while not compromising on quality, robustness, and reliability. Eco IC has been developed to enable more users to benefit from this technique. Whether you need to perform routine water analysis or you’re looking for an instrument for higher education, Eco IC comes with all the components you need. In addition, you can also save time and reduce work by getting an automated system.

  • Automotive Audio Bus (A2B®)

    Analog Devices Inc.

    Analog Devices Automotive Audio Bus (A2B®) technology provides critical support to the vehicle infotainment systems of tomorrow. Our A2B products deliver high fidelity audio while increasing fuel efficiency, thanks to upward of 75% less cabling weight. The A2B portfolio helps enables multiple applications such as voice recognition and active noise cancellation. A2B is a single-master, multiple-slave system where the transceiver chip at the host controller is the master.

  • Digital Potentiometers

    DigiPOT - Analog Devices Inc.

    Analog Devices portfolio of digital potentiometers provide uncompromising performance across a wide range of industrial temperatures. Sometimes called digital pots, RDACs, or digiPOTs, these compact devices can be used to calibrate system tolerances or dynamically control system parameters. DigiPOTs such as the AD5123 and AD5143 offer a nonvolative solution for 128-position/256-position adjustment applications, with low resistor tolerance and the low temperature coefficient simplifying open-loop applications and those that require tolerance matching.

  • Low Noise Amplifiers

    Macom Technology Solutions Holdings Inc.

    MACOM low noise amplifier MMICs cover a frequencies from DC to 86 GHz operation for a wide range of applications, including network infrastructure, radar and communication systems. MACOMs portfolio of low noise amplifiers offer a broad array of noise figures, input IP3, and input power in bare die and a variety of package types. Offerings include wideband distributed topologies and self or actively biased configurations tailored to system design needs.

  • PMC to PCI Adapters

    Silicon Control Inc.

    The PMC to PCI, PMC to CPCI and PMC to PC/104+ adapters enable the use of the PMC650 or PMC850 bus analyzers in PCI, CompactPCI and PC/104+ systems. The PMC analyzer plugs onto the adapter and then the mated adapter and analyzer plug into a PCI, CompactPCI or PC/104+ system. These passive adapters route the bus signals from the analyzer to the bus with minimal trace length and impedance matching. The adapters provide the full 64 bit interconnect between the analyzer and the bus.

  • Cable Identification & Phasing

    VCi-3™ - ndb Technologies Inc.

    The VCi-3™ system is designed for cable and phase identification, mainly for instal­lation or maintenance purposes on three-phase electrical networks during power shutdowns.The transmitter module injects a low current on the cable conductors by direct con­tact or magnetic clamps methods. A voice message is recorded by the user and will be transmitted along with digital signals. Groundings stay connected at both ends of the three-phase circuit during the test. The detector module is used at the other end of the cable system.

  • Check Case Definition Language

    CCDL - Razorcat Development GmbH

    CCDL is a test specification language that provides a dedicated high-level and easy to learn test language for powerful requirements based system testing. The fully automated test execution and evaluation shortens testing cycles and reduces required manpower. The intuitively readable CCDL test specification reduces documentation effort and the test execution flow visualization reveals the dynamic behavior of the system under test (SUT) and clearly spots any deviations against the expected results.

  • Dual 4 To 1 Terminated 50Ω 600MHz PXI RF Multiplexer

    40-761A-002 - Pickering Interfaces Ltd.

    The 40-761A-002 terminated dual 4 to 1 multiplexer is part of a range of RF multiplexers available in the following configurations: dual, quad and octal 4 to 1, single, dual and quad 8 to 1, single and dual 16 to 1 and single 32 to 1. All multiplexers have the option of automatic terminations which offer advantages at system level by reducing the presence of standing waves in the system which can cause degradation in isolation and crosstalk.

  • Dual 16 to 1 Terminated 50Ω 600MHz PXI RF Multiplexer

    40-765A-002 - Pickering Interfaces Ltd.

    The 40-765A-002 terminated dual 16 to 1 multiplexer is part of a range of RF multiplexers available in the following configurations: dual, quad and octal 4 to 1, single, dual and quad 8 to 1, single and dual 16 to 1 and single 32 to 1. All multiplexers have the option of automatic terminations which offer advantages at system level by reducing the presence of standing waves in the system which can cause degradation in isolation and crosstalk.

  • Military Aircraft Lighting

    Oxley Group

    Oxley continues to provide the benchmark in LED lighting for military fixed wing and rotary aircraft. Solutions include external lighting systems, internal cockpit/cabin lighting, and the widest range of positional, landing and taxi lights. Both visible and covert solutions are available for day and night operations; many lights in the range provide dual mode capability. Oxley has experience in designing and manufacturing highly specialized solutions such as complex air refueling lighting systems.

  • Functional Test Fixtures

    RNS International

    RNS can build almost any test equipment and automated test machinery. We have delivered soltions for HiPot, LED Test, Leak Test and RF shielded applications for years. We can provide Complete Test Systems, including Test Fixtures, Rack System and even Programming. Our team is committed and has a proven track record of delivering exceptional products independent of scope, so simple- and high-complexity projects are handled with equal care.

  • PCI High Density Resistor Card 5-Channel, 16-Bit, 0 To 65k Ohm

    50-295A-021-5/16 - Pickering Interfaces Ltd.

    The 50-295A is a Programmable Resistor card with up to 18-channels of 8-bit resolution resistor chains in a single PCI slot. The flexible architecture allows the card to also be supplied as 12-bit, 16-bit or 24-bit resolution versions for applications requiring finer resolution, greater resistance range or higher channel count. The card is ideal for simulating the sensors for control and management systems under test, allowing the user to verify system response in design verification or manufacturing test applications.

Get Help