Showing results: 736 - 750 of 872 items found.
-
ISL29125 -
SparkFun Electronics
If you’ve had ideas for a project that depends on the ability to sense different spectrums of visible light and react based on those measurements, the ISL29125 breakout board may be just what you need. The ISL29125 breakout board makes it very easy to sense and record the light intensity of the general red, green, and blue spectrums of visible light while rejecting IR from light sources. You can then use these color sensor readings for the purposes of logging and finding patterns, or creatively calculate and make control decisions in your electronic projects.
-
InfraTec GmbH
Single channel enhanced IR detectors with fast response, extended gain, and/or high modulation frequency range for applications in spectroscopy and analytical instruments.
-
WITec
All WITec''s Raman microscopes are operated with ultra-high throughput spectrometers (UHTS) that were distinctively developed for high speed and high resolution Raman imaging. The UHTS series comprises of six models in several focal lengths to accommodate multiple laser excitation wavelengths (UV to IR) and spectral resolution requirements.
-
MS-700 Series -
EKO Instruments Co., Ltd.
Since their introduction, they were widely used as reference instruments for outdoors spectral irradiance measurements in the fields of Photovoltaic and Meteorological research. In 2001 the MS-700/701 was successfully introduced and adopted by researchers. Since then, the MS series expanded, with sophisticated instruments like MS-711 and MS-712 which cover a wide spectral range for VIS-NIR-IR applications. The MS-series now covers a spectral range from 300nm up to 1700 nm. All spectroradiometers benefit from an advanced spectrometer which is temperature controlled at a fixed temperature to maximise performance in a wide operating temperature range. During the years we proved that long term stability was one of the success factors of the MS-series spectroradiometers.
-
832 Series -
Leco Corp.
LECO’s 832 series will redefine the way you determine sulfur and carbon in a wide variety of organic materials. Using extensive customer feedback and innovative engineering, our latest instrumentation takes advantage of an on-board software platform powered by a touch-screen interface, increasing usability and operational control without using valuable bench space. A high-efficiency combustion furnace, improved IR cell design, and a robust, rugged design make the 832 a valuable resource for any laboratory needing fast and accurate analysis of sulfur and/or carbon in organic materials.
-
Linkam Scientific Instruments
Your product descripThere are various version options for this stage, including pressure, vacuum, electrical sample measurement and sample holders to mount the stage vertically in IR or xray spectrometers.tion goes here.
-
ST60 TO-18 -
Dexter Research Center, Inc.
A single-channel silicon-based thermopile provides lowest cost solutions in a small active area of 0.61mm x 0.61mm in a small TO-18 package. Time constant of 18ms with Nitrogen encapsulation gas. Delivers a very low Temperature Coefficient of Responsivity of -0.04%/C. This detector has a very short thermal shock response to ambient temperature change.
-
ST120 TO-5 -
Dexter Research Center, Inc.
A single-channel silicon-based thermopile provides lowest cost solutions in a small active area of 1.2mm x 1.2mm in a TO-5 package. Time constant of 25ms with Nitrogen encapsulation gas. Delivers a very low Temperature Coefficient of Responsivity of -0.04%/C. This detector has a very short thermal shock response to ambient temperature change.
-
S25 TO-5 -
Dexter Research Center, Inc.
A single-channel silicon-based thermopile that offers the smallest single element active area size at 0.25mm x 0.25mm in a TO-5 package. Delivers a fast 18ms time constant in Argon encapsulation gas and even faster with Neon gas at 9ms. Delivers a very low Temperature Coefficient of Responsivity of -0.04%/C.
-
M5 -
Dexter Research Center, Inc.
A thin film-based thermopile offering very low noise and a small 0.5mm diameter active area in a TO-5 package. This is one of the lowest noise thermopiles you can buy and provides a time constant 28ms time constant with Argon encapsulation gas.
-
DR34 Compensated -
Dexter Research Center, Inc.
A one-channel compensated thin-film thermopile in a TO-5 package. The active area and compensating element area are 3.16mm x 0.4mm each. Internal aperture minimizes channel-to-channel crosstalk and thus increasing sensitivity.
-
ST150 With Diffractive Lens -
Dexter Research Center, Inc.
A single-channel silicon-based thermopile with integrated diffractive lens and internal baffle that delivers a very low Temperature Coefficient of Responsivity of -0.04%/C with a high output voltage, 19.5 FOV and a quick time constant of 38ms. This Low-cost detector comes in a TO-5 package and has a very short thermal shock response to ambient temperature change.
-
M34 -
Dexter Research Center, Inc.
A thin-film thermopile in a TO-5 package with an active area of 3.16mm x 0.4mm that offers low noise output.
-
1SC Compensated -
Dexter Research Center, Inc.
A thin film-based single channel thermopile detector that offers thermal compensation to minimize effects of sudden ambient temperature change during the initial five seconds of change. The 1SC Compensated comes in a TO-5 package with a medium sized 1.0 x 1.0mm active area. Compensation is achieved through the integration of two additional half-sized thermopile elements. Internal aperture is standard and precisely defines active area for applications with FOV and/or spot size requirements.
-
1M -
Dexter Research Center, Inc.
A thin film-based thermopile with a 1.0mm diameter active area with good signal-to-noise ratio in a TO-5 package and a moderate time constant of 32ms with Argon encapsulation gas.