Filter Results By:

Products

Applications

Manufacturers

Instruments

read precision values.

See Also: Instrument Cables, Modular Instruments, Instrumentation Amplifiers


Showing results: 1486 - 1500 of 5005 items found.

  • ScanWorks IJTAG Test

    ScanWorks IJTAG Test - ASSET InterTech, Inc.

    The ScanWorks Internal JTAG (IJTAG) tools allow system-on-a-chip (SoC) designers, DFT engineers and validation engineers a new and simpler way to access, control and run any embedded instrument designed into chips. When the IEEE ratifies the IEEE 1687 IJTAG standard in 2013, it will enable easy access to run any functional type of IJTAG instrument. ASSET is the first tool supplier with development tools available today for the early adopters of this important new technology.

  • Thermocouples

    WIKA Alexander Wiegand SE & Co. KG

    Thermocouples are temperature sensors that generate a voltage directly dependent on temperature. Compared to resistance thermometers, they are particularly suited for high temperatures up to 1,700 °C. Instrument designs from mineral-insulated sheathed cable are very resistant against extremely high vibration loads (depending on instrument model, sensor element and wetted materials). The accuracy classes 1 and 2 apply for thermocouples in accordance with IEC 60584 as well as the standard and special classes in accordance with ASTM E230.

  • 100MS/s 100MHz BW LPT/parallel Port 2-Channel Digital Storage Oscilloscope, Spectrum Analyzer, Voltmeter, Transient Recorder, AWG/Function Generator

    HS801-AWG - TEAM SOLUTIONS, INC.

    The HS801: the first 100 MSPS measuring instrument that consists of an Arbitrary Waveform Generator/Function Generator, a Voltmeter, a Digital Storage Oscilloscope (DSO), a Spectrum analyzer, and a Transient Recorder. This new portable and compact measuring instrument can solve almost every measurement problem. Analyzing signals is done with 8-bit resolution and a maximum sampling speed of 100 MHz. The input range is 0.1 Volt full scale to 80 Volt full scale. The record length is 32K/64K samples.

  • X-ray Fluorescence, XRF Analysis Services

    Evans Analytical Group®

    Two XRF systems are available, a wavelength dispersive system (WDXRF) and an energy dispersive system (EDXRF). The difference is the manner in which the x-rays are detected. WDXRF instruments have very good energy resolution which leads to fewer spectral overlaps and improved background intensities. EDXRF instruments have higher signal throughput which can shorten analysis times. The higher signal throughput also makes EDXRF systems suitable for small spot or mapping analysis.

  • Radiation Pressure Series

    Scientech Inc.

    The Radiation Pressure Series is Scientech’s newest innovation, designed to accurately measure high power levels from lasers that would normally require expensive, large water-cooled calorimeters. These instruments measure the radiation force exerted by the laser beam on a mirror and significantly improve response time, size, and scalability. The mirrors are designed to reflect ≥99.999% of the laser energy and allow continuous measurement. Radiation Pressure Series instruments actually improve in accuracy as laser power increases.

  • Tunable Laser Source

    Apex Technologies

    AP405xA series tunable laser sources are high performance external cavity Littman tunable lasers combining wide tuning range, high output power and high signal-to-noise ratio. Different wavelength ranges are available between 1000 nm and 1650 nm. Tunable laser sources OEM and stand-alone benchtop instrument versions are available. The TLS benchtop instrument is proposed with a friendly-user software, a touch sensitive screen, GPIB, ethernet , RS-232 and USB controls.

  • Cord Grip Test Apparatus

    SCR ELEKTRONIKS

    SCR ELEKTRONIKS focuses on designing a solution around the end use at her customer. Instead of offering a standard instrument for a specific task, we have an approach of customizing the test bench to target the specific goals of the process or test procedure. Our measurement instruments, test modules, electrical power systems & software libraries are developed with this vision, thereby reducing the test system’s time-to-deploy. Cord Grip Test Apparatus for testing effectiveness of the retention in flexible cables.

  • Humidity

    Rotronic Measurement Solutions

    The main fields of use for humidity measuring equipment lie in the pharmaceutical and food industries, heating, ventilation and air-conditioning (HVAC) applications as well as drying processes and storage. Measurement of air humidity moreover plays a key role in meteorology, while archives and museums also use data loggers or humidity measuring instruments. Apart from humidity, temperature is often also measured. Rotronic humidity measuring instruments therefore usually also measure temperature at the same time.

  • PD Monitoring Systems

    Power Diagnostix Systems GmbH

    The ICMmonitor is an instrument for continuous on-line monitoring of partial discharge activity in high voltage equipment. The instrument tracks changes in key discharge quantities for storage in trending diagrams and for triggering user-settable alarms. TCP/IP, Modem, fiber optic or direct serial links enable remote access and full remote control. The latest version of the ICMmonitor comes with spectrum analysis function (formerly know as SPECmonitor), acoustic signal detection, and a conventional partial discharge measurement circuit.

  • Dynamic Signal Acquisition and Analysis

    M+P International

    m+p Analyzer systems are available for field and laboratory use from 4 to many hundreds of measurement channels. From gathering simple time history data to narrowband (FFT) spectra, fractional octaves, wavelets, shock response spectra and much more, m+p Analyzer real time analyzers can be used with a wide range of instrumentation hardware including our own m+p VibPilot, m+p VibRunner and m+p VibMobile systems, National Instruments (CompactDAQ USB, PCI, PXI) and VTI Instruments (PCI). Low cost portable instruments to systems for distributed measurements can be configured for maximum flexibility. Measurement data from all sources are stored in a common format so it is easy to compare and handle results from any measurement source.

  • Resister

    AATA Japan Co., LTD.

    Our ARFC type Film Flat Chip Resistor & ARFCN type Thin Film Chip Resistor Network are high precision Metal Film resistors produced with high purity. Alumina Substrate and Ni-Cr-Si Resistor Film based on high precision Etching Technology. The electrode Terminals are made with Spattering Film and Nickel-Solder Plating, and solderability is very good in all Flow, Reflow and Dipping type soldering for Hybrid IC, SMT, PCB etc. Our ARFC Metal Film Resistor & ARFCN type Thin Film Chip Resistor are being produced under the thorough quality control, and are being used widely in high precision and high reliability electronics circuit such as Measuring Instrument, Medical Instruments, Communication and other Industrial Instruments.

  • SGMA Upconverter

    SGU100A - Rohde & Schwarz GmbH & Co. KG

    The R&S®SGU100A SGMA upconverter offers a frequency extension to 40 GHz. When the R&S®SGS100A and the R&S®SGU100A are connected, they act as a single instrument for both remote control and manual operation. The combined instruments offer the same connections as the R&S®SGS100A: one RF output for the entire frequency range and one analog I/Q input for vector modulation. In this setup, tasks are automatically distributed between the two instruments so that users feel as if they are operating a single instrument.Equipped with the R&S®SGU100A, the R&S®SGS100A covers the entire frequency range from 10 MHz to 40 GHz without modulation, and from 80 MHz to 40 GHz with vector modulation.

  • Fully Customized OEM and ODM Spectroscopic Solutions

    BaySpec, Inc.

    BaySpec offers fully customized original design (ODM) and original manufacturing (OEM) integration of advanced spectroscopic solution. With diverse instruments range from handheld portable spectrometers, high-performance UV-VIS-NIR-SWIR spectrometers, hyperspectral imagers, and portable mass spectrometers. BaySpec’s innovative R&D team designs and develops the spectral instrument around customers’ specifications. BaySpec’s R&D team is made up of experienced engineers who work with the customer to fully understand the scope of the application requirements, whether it is to address a specific wavelength range, or for instrument operation in a particular environment. The design and manufacturing process all take place on-site at the BaySpec facility in San Jose, California, following strict processes of product quality and control. We have the expertise to take an idea and put it into action!

  • Crush Tester

    CRT-01 - Jinan Leading Instruments Co., Ltd.

    CRT-01 Crush Tester is a high accuracy and intelligent instrument, designed according relevant standards. The advanced components, mating parts and micro-computer are logical structured, to ensure the property and appearance.

  • Dielectric Cure Monitor

    LT-451 - Lambient Technologies

    The LT-451 Dielectric Cure Monitor is a versatile instrument designed for research and development, quality assurance/quality control, and manufacturing applications involving thermoset materials such as resins, composites, and paints and coatings.

Get Help