Showing results: 316 - 330 of 4999 items found.
-
DynTek-PC -
Taylor Dynamometer, Inc.
The DynTek-PC for engine dynamometers is a display-only system intended for basic engine dynamometer testing requirements. This system provides for the measurement of torque in either tension or compression (both clockwise and counter-clockwise engine rotation) and speed from a standard Magnetic Pickup. The system is designed to set on a table or desktop near the PC.
-
MPA-100 -
Santec Corporation
MPA-100 is a highly integrated rack mountable model of pigtailed photo-detectors. Multi-channel optical power from MPO or MTP connectors are measured. Photo-detectors of Silicon type for 850 nm range and InGaAs type for 1260 - 1610 nm are available. The detected photo-current is converted into a voltage output using a 16-bit multi-channel DAQ interface. The dimensions are (W) 482.6 x (D) 430 x (H) 44 mm. The highly integrated MPA-100 is available up to 80 channels with an excellent cost performance and small footprint. The MPA-100 is useful for many 40 GbE / 100 GbE applications, such as testing and monitoring of transceivers (SR4, SR10, LR4, and ER4) for data communications, broadband / CATV, and telecommunications. Tap-PD model (Eg. a partial 5 % tapped power detection) is also available with customization.
-
GL Communications Inc.
GL’s PacketExpert™ 10G provides comprehensive testing of 10 Gbps wirespeed Ethernet/IP networks. It has two 10 Gbps Optical ports, and two 10/100/1000 Mbps Electrical/Optical ports capable of BERT, Smart Loopback, RFC 2544, ExpertSAM, Record and Playback, IPLinkSim™ and PacketBroker functionalities.
-
HS-WDI -
HenergySolar
Application■Semiconductor wafer■Solar wafer■Solar Cell■Thin-film Cell
-
DS & pDS Meters™ -
Myron L Company
No water supply is completely pure. Every industrial, commercial, or natural source contains dissolved solids or salts. These impurities contribute to scale, corrosion, poor taste, and environmental pollution that endanger animal and plant life. Myron L® Company has two proven ways to measure such impurities. Our DS Meters™ provide fast, accurate, on-the-spot measurements of total dissolved solids (TDS) or conductivity. pDS Meters™ test conductivity or TDS, plus pH. Readings from their highly stable circuitry help assure product quality, prevent equipment damage and verify in-line instrumentation in a wide range of applications.
-
Soken Electric Co. Ltd
is desirable for measuring ratio errors and phase angles of low current (voltage) transformers used in electric devices, such as watt hour meters, smart meters, digital current meters, and transducers, etc.
-
SHF Communication Technologies AG
In digital high speed test and measurement, a perfect clock signal is crucial for the generation of low jitter reference test signals. A SHF Synthesized Signal Generator (Synthesizer) used as a clock source can operate over several decades of frequency and is an essential part of any high speed test and measurement environment.
-
-
FISCHERSCOPE X-RAY/XUL -
Helmut Fischer AG
For coating thickness measurements in the electroplating industryFixed aperture and fixed primary filterX-ray tube with a slightly larger primary spot, well suited for applications with measurement spot sizes starting at about 1 mmLow-energy beam components are excited with lower effectiveness, however for standard applications measuring the thickness of typical electroplated coatings such as Cr, Ni, Cu, this poses little to no problemMeasuring direction from bottom to top, this allows for quick and easy sample positioningLarge measurement chamber with a cutout (C-slot) Standard X-ray tube, proportional counter tube
-
HBM, Inc
Whatever your application, mobile or stationary, on a test cell or under extreme environmental conditions, HBM has the right measurement data acquisition system for your needs.
-
SoMat
Whatever your application, mobile or stationary, on a test cell or under extreme environmental conditions, HBM has the right measurement data acquisition system for your needs.
-
Advance Instrument Inc.
It is a Strain Gage Indicator and also function as a Strain Gage Transducer Indicator.As a Strain Gage Indicator, it can support 10 types of bridges and dummies. While if used as a Strain Gage Transducer Indicator, there are 24 bits A/D converts to make the measurement.
-
-
881E/882E -
Teledyne LeCroy quantumdata
The Teledyne LeCroy quantumdata 881E/882E-HDMI Video Generator model is packed with features for video and audio testing of HDMI 1.4a sink devices. The HDMI transmitter provides 12-bit/component deep color and HDMI 3D testing features. An analog option with 250 MHz analog output and composite analog for NTSC and PAL testing is available as well with the HDMI transmitter only configuration.
-