Filter Results By:

Products

Applications

Manufacturers

Light

Visible spectrum of electromagnetic radiation from 400nm to 700nm.

See Also: Illumination, Lighting, Lightning, Lightwave, Daylight, Luminescence


Showing recent results 1531 - 1545 of 1987 products found.

  • Analog Cameras

    WONWOO

    1/4" 613K pixels Sony Super HAD II Double scan CCD 700TV lines High Resolution Powerful x36 Optical Zoom, x32 Digital Zoom(Total x1,152) True WDR(x512) Digital Noise Reduction(2D+3D) Digital Image Stabilizer(DIS) High Light Compensation(HLC) 255 Presets, 8 Tours, 8 Scans, 4 Patterns, 16 Areas, 2 Alarms 360 Endless Pan Rotation Stainless Steel Construction Upright or Inverted Installation For Use in a Variety of Harsh and Hazardous Environments including Marine Environments Built-in Wiper System

  • 1.3 MP Custom Lens NIR Camera Module (Monochrome)

    e-CAM10_CU0130_MOD - Sensory Analytics

    The e-CAM10_CU0130_MOD is a 1.3 MP NIR Camera module (Monochrome) based on the Aptina / ON Semiconductor AR0130CS CMOS image sensor with S-mount lens holder attached to it. The AR0130 is a 1/3” Optical Form factor, Electronic Rolling Shutter CMOS sensor with enhanced sensitivity in the Near Infrared region and superior low light performance. The e-CAM10_CU0130_MOD is designed to connect with any Application Processor that has parallel digital video interface. The standard S-Mount lens holder can accommodate a wide range of lenses based on the customer choice. e-CAM10_CU0130_MOD’s S-Mount holder can also house a fisheye lens or a zoom lens to meet their application requirements.

  • 1.3 MP Custom Lens NIR Camera Module (Monochrome)

    e-CAM10_CU0130_MOD - e-con Systems Inc.

    The e-CAM10_CU0130_MOD is a 1.3 MP NIR Camera module (Monochrome) based on the Aptina / ON Semiconductor AR0130CS CMOS image sensor with S-mount lens holder attached to it. The AR0130 is a 1/3” Optical Form factor, Electronic Rolling Shutter CMOS sensor with enhanced sensitivity in the Near Infrared region and superior low light performance. The e-CAM10_CU0130_MOD is designed to connect with any Application Processor that has parallel digital video interface. The standard S-Mount lens holder can accommodate a wide range of lenses based on the customer choice. e-CAM10_CU0130_MOD’s S-Mount holder can also house a fisheye lens or a zoom lens to meet their application requirements.

  • 1000A AC/DC Clamp Meter

    CM84 - Martindale Electric Co. Ltd

    The CM84 is a high specification 1000A clamp meter, packed full of functions for the installation, testing and maintenance of domestic and industrial installations. It is light enough for easy one handed operation but still robust enough for use in harsh environments.

    This compact meter provides accurate measurement of AC voltage to 750V, DC voltage to 1000V and AC current to 1000A. It has the same test functions you would find on a high specification multimeter making this clamp a comprehensive testing solution for electricians, maintenance and service engineers. This has the added benefit of DC current measurement to 1000A and has a useful DC current zero function.

  • Airborne Corona Detection

    DayCor® Rom - Ofil Ltd.

    DayCor® ROM, ROMpact Corona detection solutions for high speed airborne inspections and remote detection with outstandingly sensitivity and precision. ROM & ROMpact are light in weight, simple to install and configured for gyro stabilized payloads of sizes and mounts locations that match most known helicopters and UAVs. Optional combinations of IR-UV-HD multisystem per customer’s preferences. Features include: Digital video recording and storing; intercom voice annotation recording; rapid zoom; auto focus of the UV and visible channels; UV events counter, GPS data; control & display unit; auto tracking, multilingual localized report software.

  • RF-Microwave Radiation Measurement

    MW-AM10 - Sensory Perspective Ltd

    The Acoustimeter is a user-friendly accurate RF measurement instrument which provides both LED lights and LCD text display of peak and average levels of radio frequency and microwave frequency electromagnetic fields, covering the spectrum from 200 MHz (digital TV and radio) all the way up to and beyond the latest 5.6 GHz WiFi and WiMax frequencies to over 8 GHz. It has a digital readout which is sensitive to 0.02 V/m and a sound output enabling you to hear the actual sound of the signal modulation. These features make the instrument the most useful one available to even those with severe electrosensitivity.

  • Multi-Mode Ultrasonic Thickness Gauge

    Mitech Co., LTD.

    Multi-mode ultrasonic thickness gauge is the newest promoted upgraded product by Mitech. It pays more attention to user experience and functional innovation. Adopted with 320*240 colorful LCD display, it can show you clear measurement result under dim light and strong sunshine environment, improved the visual experience greatly. Sealed aluminum-magnesium alloy case delicate design, smaller volume, better quality are specially designed for defense against oil, dust in the bad sit environment. With intelligent warning function, it will promote automatically when beyond the setting range, it is convenient for reading.

  • Multiphoton Laser Scanning Microscope

    FVMPE-RS - Olympus Corp.

    The Olympus FVMPE-RS multiphoton imaging system is purpose-built for deep imaging in biological tissue, aimed at revealing both detail and dynamics. Innovative features for efficient delivery and detection of photons in scattering media enable high signal-to-noise ratio acquisition. This translates to bright images with precise details — even from deep within the specimen. High sensitivity is matched with high-speed imaging to capture rapid in vivo responses. For advanced applications, dual-wavelength excitation extending to 1300 nm is available. Independent control of visible or multiphoton laser light stimulation and the ability to synchronize with patch clamp data are also possible.

  • Multi-point Laser Sensor for Rapid Component Inspection

    HL-D3 - Panasonic Automotive & Industrial Systems Europe GmbH

    With the HL-D3 measurement sensor heads, you can choose one of four sensing modes to cater to a variety of measurement needs, including high-speed sensing in production lines and high-precision detection at workstations outside production lines. The HL-D3 series calculates the shapes, including the height difference, width, and cross-sectional area, from the shape waveform based on the received light. At the same time, the displacement sensor uses these calculation results to instantaneously make High / Go / Low judgments based on the current upper and lower limits (only height calculation and step calculation are possible in multi-select displacement sensing mode).

  • Multi-Sensor Systems

    Inframet

    Multi- sensor surveillance systems represent a fast growing group of electro-optical systems of critical importance in both defense and civilian applications. At the same time they are the most expensive groups of electro-optical systems. Most advanced but rarely met multi-sensor surveillance systems are built from a long series of sensors like thermal imager (or two thermal imagers, color VIS camera, low light VIS-NIR camera, SWIR camera, laser range finder, laser designator, laser pointer, illuminator located on a stabilized platform and such systems. Simpler systems built from two-three sensors located on smaller stabilized or non-stabilized platforms are more common.

  • On-Board Digital Flow Meter

    DF-210B / DF-211B - Ono Sokki

    The DF-210B / DF-211B are small-size, light weight and a low-profile with approx. 3 cm thickness flow meters designed for use on vehicles. The DF-210B measures instantaneous flow and accumulated flow with high resolution at 0.01 l/h in combination with FP-2140H / 2240H Positive-displacement Flow detectors. The DF-211B Extension Unit provides additional function to display the pressure, temperature, and elapsed time on-vehicle measurement. Portable battery box, DF-021A, is provided as an option, which is used to supply power to both units using its internal dry cell in case that the enough power supply is difficult on vehicle.

  • Onyx 1.3M

    EV76C664 - Teledyne e2v

    Teledyne e2v’s Onyx family of image sensors are designed for the most demanding outdoor camera and industrial machine vision applications, where illumination budgets are restricted or where high-speed inspection is required.Teledyne e2v’s new Onyx EV76C664 is a 1.3 million pixel CMOS image sensor for low light applications. It has been designed using e2v’s advanced CMOS imaging technology and is ideal for many different types of application where premium performance imaging is required. The Onyx EV76C664 has an innovative pixel design which offers excellent performance in low-light conditions, but also caters for ‘all-light’ environments (typical of outdoor camera applications) where wide dynamic range is also needed.

  • Optical Form- and RoughnessMeasurement System

    InfiniteFocus - Alicona Imaging GmbH

    With the InfiniteFocus you benefit from a 3D micro coordinate measurement machine and surface roughness measurement device in only one system. The range of measurable surfaces is almost unlimited, enabled by the use of coaxial lightning and optimized LED ring light. You achieve traceable measurements that combine high resolution, high repeatability and high accuracy. All relevant surface features are measured using only one multi-functional measurement sensor. Generally, the optimal setting of measurement parameters is provided automatically. This allows multiple users in different groups or departments with different materials to use the system with ease and confidence.

  • Rail Vacuum Circuit Breakers

    Omnicor

    Rail Vacuum Circuit Breakers are usually multi-functional AC vacuum circuit breakers combined with several other functions such as Disconnect Switches, Earthing Switches or Pantograph Interlocking valve making them a unique and small unit. Small size and light weight make vacuum circuit breakers perfect solution for rolling stock running on 15 kV or/and 25 kV railway networks. In addition to operating frequency of 50 Hz and 60 Hz sometimes 16.7 Hz frequency is also required. Because of rail vacuum circuit breaker location on the train and wide operating temperatures on the train routes temperature from -50 C to + 70 C is also one of the requirements.

  • Rebar Locator

    Profoscope - PASI srl

    The Profoscope is a versatile, fully-integrated rebar detector and cover meter with a unique real-time rebar visualization allowing the user to actually “SEE” the location of the rebar beneath the concrete surface to a maximum depth of 180 mm. This is coupled with rebar-proximity indicators and optical and acoustical locating aids. Rebar diameter can also be estimated within the specified testing range. The Profoscope combines these unique features in a compact, light device that allows the user to operate this rebar detector with one hand making the task of locating rebars a simple and efficient process. In addition, Proceq’s rebar detector convinces through its intuitive user interface making rebar detection easy.