Showing recent results 1561 - 1575 of 1963 products found.
-
MOS-200/200M - Uniscan Instruments Ltd
The MOS-200 spectrometer uses a Xe or Xe(Hg) 150 Watts light source attached to a manual monochromator on an optical bench.The connection to the Bio-Logic Stopped-Flow is done through a fiber optic specially designed to match the Stopped-Flow cuvette dimensions.The signal detection is performed by a photomultiplier directly mounted on the Stopped-Flow and connected to its control unit.The photomultiplier can be attached at 180° of the light source or at 90° allowing absorbance or fluorescence measurements (both at the same time using an optional additional detection channel). For fluorescence measurements, standard filters can be installed in front the photomultiplier tube inside the holder.The MOS-200/M has the simplicity of the MOS-200 and a motorized excitation monochromator for automatic spectral reconstruction.You may be interested in...
-
Solo 365 - Detectortesters
The fire industry’s most popular range of detector test equipment is about to get even better. Solo, the test equipment used world-wide to functionally test fire detectors has a new tester in its range – Solo 365. This exciting innovation provides fire safety professionals with an array of stand-out features which make for faster, simpler and cleaner functional testing of smoke detectors. Key features include automatic generation of smoke which ensures only the amount of smoke needed to activate the detector is produced – minimizing smoke wastage and eliminating the risk of detector contamination. In addition, Solo 365 is light in weight and has a slim-line design which allows easy access into tight spaces – making it possible to test detectors which are hard to access with other portable testers. In response to market feedback, Solo 365 features an LED torch which automatically illuminates when light levels drop, making for easy detector alignment and testing in dark environments. Smoke is generated via newly designed smoke cartridges which fit neatly into the rear of the tester. With no reliance on pressurised aerosol cans, the cartridges can be easily shipped and stored and are unaffected by new regulations, set for 2018, which will affect availability of some pressurised smoke aerosols.
-
Photo Emission Tech., Inc.
QE system provides electronics and software designed for fully automated measurement of external quantum efficiency of solar cells. All systems include probes and a fixed plate sample stage for samples up to 150 mm x 150 mm. The main system components include: custom designed software, measurement electronics, and computer system (Windows 8 operating system). The measurement involves focusing monochromatic light to a spot on the device under test, then accurately measuring the photon flux and current from the test cell. The system utilizes a dual beam configuration with lock-in detection, providing an absolute accuracy of ±3%. The QE system uses a grating monochrometer with silicon/InGaAs/Ge detectors. The system includes automatic order sorting filters and two light sources for monochromatic illumination (a Xenon- arc lamp and a halogen lamp). A single lock-in amplifier is used to measure both the reference detector and test device. The main system comes with all the hardware needed to measure quantum efficiency, a fixed plate sample stage and probes.
-
OWL 1280 - Raptor Photonics
Using a 1280 x 1024 InGaAs sensor from SCD, the OWL 1280 offers visible extension from 0.4µm to 1.7µm to enable high sensitivity imaging. The 10µm x 10µm pixel pitch enables the highest resolution imaging. The camera will also offer 2 x 2 binning to become 640×512, 20µm pitch for ultimate low light vision and high speed applications. It will offer less than 35 electrons readout noise combined with one of the lowest dark current readings on the market. The camera will offer ultra-high intrascene dynamic range of 70dB enabling simultaneous capture of bright & dark portions of a scene. Available with a 14 bit CameraLink output, the OWL 1280 will run from 10 up to 60Hz. The camera will feature On-board Automated Gain Control (AGC) which will enable the best contrast image from low light to bright as well as an on-board intelligent 3 point Non Uniform Correction (NUC) algorithm providing the highest quality images. As with all Raptor cameras the OWL 1280 is ultra compact, rugged and low power (< 3W). The camera is stabilised with no fan.
-
TAG5-Hyp - Tattile S.r.l.
Hyperspectral imaging (HIS) has made inroads in the machine vision industry in the recent past. More and more customers ask about the opportunities of this technology. With the new TAG5-Hyp HSI camera Tattile offers a state of the art hyperspectral camera equipped with a compact and robust Snapshot Mosaic Sensor available in two versions: the 4×4 filter array with 16 HSI bands captures visible light in the spectrum of 470-630nm and the 5×5 filter array with 25 HSI bands captures near infrared light in the wavelength between 600-975nm. The effective resolution in the 4×4 array lies at 512×272 pixels and in a 5×5 array at approx. 410×218 pixels. The original resolution can be reconstructed by interpolation. Moreover, the new C-Mount hyperspectral camera takes advantage of the well-established Tattile TAG-5 high performance digital camera which is fully compatible with the GigE Vision and GenICam standards. Power over Ethernet supply (PoE) and the compact design with dimensions of 34x34x59 mm at a weight of 115g allow a quick and easy installation, at any inspection point. Equipped with a CMV2000 global shutter image sensor it operates at a frame rate of 44 fps.
-
FIRS Technologies(Shenzhen) Co.,Ltd.
1. Our face recognition time attendance terminal supports multiple identification methods. 2. The adoption of the powerful SDK allows two-way data interaction and auto uploading function. 3. Supporting the GPRS data transmission, this product has optional TCP/IP, USB communication interfaces for multi applications. 4. Its embedded face monitor software allows for on-site and remote (optional) video monitoring.5. This product is fitted with a buzzer, body sensor and anti-disassembly security alarm. 6. The user data and RTC synchronization can be simultaneously displayed. 7. The access control ability of this face recognition time attendance terminal is maximum users for E5 1: N (500 users) and for E10 1: N (1000 users).8. There are an embedded web server and standard attendance management software manufactured by our own company.9. The exclusive facial image +V4.0 recognition algorithm is used to ensure operation speed and user's safety.10. This product boasts high recognition accuracy and fast speed with the recognition rate over 99.9%, false acceptance rate (FAR) less than 0.01% and recognition speed lower than1s. Furthermore, the LFM function makes recognition speed faster and accuracy higher.11. Our product adopts the 3.5 inch TFT Touch color screen with 320×240 resolution and FIRS patent non-visible auxiliary light to protect users from danger. The voice prompt is used to remind users of each operation step. 12. When data storage exceeds 85%, then the alarm light will be triggered and the alarm message is shown in LCD.13. Owing to the excellent light adaptability, our face recognition time attendance terminal can intelligently grasp the desirable information, not being disturbed by factors, like glasses, hair style, age, or other small changes of face. 14. With the features of easy operation and humanized interface, our product can work for 24 hours a day.
-
AS7262 - ams AG
The AS7262 is a cost-effective multispectral sensor-on-chip solution designed to address spectral ID applications. This highly integrated device delivers 6-channel multispectral sensing in the visible wavelengths from approximately 430nm to 670nm with full-width half-max (FWHM) of 40nm. An integrated LED driver with programmable current is provided for electronic shutter applications. The AS7262 integrates Gaussian filters into standard CMOS silicon via nano-optic deposited interference filter technologyand is packaged in an LGA package that provides a built in aperture to control the light entering the sensor array. Control and spectral data access is implemented through either the IC register set, or with a high level AT Spectral Command set via a serial UART.
-
34937A - Keysight Technologies
The Keysight 34937A is a general-purpose switch module for the 34980A Multifunction Switch/Measure Unit. It has 28 independent single-pole, double-throw (SPDT) 1A relays and 4 single-pole, single-throw (Form A) 5A relays. This module is used to cycle power to products under test, control indicator and status lights, and to actuate external power relays and solenoids. The Form C channels are 300V, 1A contacts and can handle up to 60W, and the Form A channels are 30VDC/250VAC, 5A contacts and can handle up to 150W. Standard 50-pin Dsub connectors allow for use with standard cables, terminal blocks, or mass interconnect solutions.
-
Artec Space Spider - Artec Europe S. a. r. l.
A new and enhanced precision instrument for CAD users and engineers, Artec Space Spider is a high-resolution 3D scanner based on blue light technology. It is perfect for capturing small objects or intricate details of large industrial objects in high resolution, with steadfast accuracy and brilliant color. The scanner’s ability to render complex geometry, sharp edges and thin ribs sets our technology apart. It is an ideal industrial 3D scanner for high resolution capturing of objects such as molding parts, PCBs, keys, coins or even a human ear, followed by the export of the final 3D model to CAD software.
-
WONWOO
1/4" 613K pixels Sony Super HAD II Double scan CCD 700TV lines High Resolution Powerful x36 Optical Zoom, x32 Digital Zoom(Total x1,152) True WDR(x512) Digital Noise Reduction(2D+3D) Digital Image Stabilizer(DIS) High Light Compensation(HLC) 255 Presets, 8 Tours, 8 Scans, 4 Patterns, 16 Areas, 2 Alarms 360 Endless Pan Rotation Stainless Steel Construction Upright or Inverted Installation For Use in a Variety of Harsh and Hazardous Environments including Marine Environments Built-in Wiper System
-
e-CAM10_CU0130_MOD - Sensory Analytics
The e-CAM10_CU0130_MOD is a 1.3 MP NIR Camera module (Monochrome) based on the Aptina / ON Semiconductor AR0130CS CMOS image sensor with S-mount lens holder attached to it. The AR0130 is a 1/3” Optical Form factor, Electronic Rolling Shutter CMOS sensor with enhanced sensitivity in the Near Infrared region and superior low light performance. The e-CAM10_CU0130_MOD is designed to connect with any Application Processor that has parallel digital video interface. The standard S-Mount lens holder can accommodate a wide range of lenses based on the customer choice. e-CAM10_CU0130_MOD’s S-Mount holder can also house a fisheye lens or a zoom lens to meet their application requirements.
-
e-CAM10_CU0130_MOD - e-con Systems Inc.
The e-CAM10_CU0130_MOD is a 1.3 MP NIR Camera module (Monochrome) based on the Aptina / ON Semiconductor AR0130CS CMOS image sensor with S-mount lens holder attached to it. The AR0130 is a 1/3” Optical Form factor, Electronic Rolling Shutter CMOS sensor with enhanced sensitivity in the Near Infrared region and superior low light performance. The e-CAM10_CU0130_MOD is designed to connect with any Application Processor that has parallel digital video interface. The standard S-Mount lens holder can accommodate a wide range of lenses based on the customer choice. e-CAM10_CU0130_MOD’s S-Mount holder can also house a fisheye lens or a zoom lens to meet their application requirements.
-
CM84 - Martindale Electric Co. Ltd
The CM84 is a high specification 1000A clamp meter, packed full of functions for the installation, testing and maintenance of domestic and industrial installations. It is light enough for easy one handed operation but still robust enough for use in harsh environments.
This compact meter provides accurate measurement of AC voltage to 750V, DC voltage to 1000V and AC current to 1000A. It has the same test functions you would find on a high specification multimeter making this clamp a comprehensive testing solution for electricians, maintenance and service engineers. This has the added benefit of DC current measurement to 1000A and has a useful DC current zero function.
-
DayCor® Rom - Ofil Ltd.
DayCor® ROM, ROMpact Corona detection solutions for high speed airborne inspections and remote detection with outstandingly sensitivity and precision. ROM & ROMpact are light in weight, simple to install and configured for gyro stabilized payloads of sizes and mounts locations that match most known helicopters and UAVs. Optional combinations of IR-UV-HD multisystem per customer’s preferences. Features include: Digital video recording and storing; intercom voice annotation recording; rapid zoom; auto focus of the UV and visible channels; UV events counter, GPS data; control & display unit; auto tracking, multilingual localized report software.
-
MW-AM10 - Sensory Perspective Ltd
The Acoustimeter is a user-friendly accurate RF measurement instrument which provides both LED lights and LCD text display of peak and average levels of radio frequency and microwave frequency electromagnetic fields, covering the spectrum from 200 MHz (digital TV and radio) all the way up to and beyond the latest 5.6 GHz WiFi and WiMax frequencies to over 8 GHz. It has a digital readout which is sensitive to 0.02 V/m and a sound output enabling you to hear the actual sound of the signal modulation. These features make the instrument the most useful one available to even those with severe electrosensitivity.
