Filter Results By:

Products

Applications

Manufacturers

Light

Visible spectrum of electromagnetic radiation from 400nm to 700nm.

See Also: Illumination, Lighting, Lightning, Lightwave, Daylight, Luminescence


Showing recent results 1606 - 1620 of 1890 products found.

  • Sensirion SHT31-DIS-B Humidity and Temperature Sensor Breakout Board

    SEN-37002-H - Playing With Fusion Inc

    Breakout board for the Sensirion SHT31-DIS-B. This sensor is an extremely accurate digital (I2C interface) temperature and humidity sensing device, with +/-0.2C temperature and +/-2% humidity accuracy typical. These specs far exceed the accuracy of ICs that came before it, including the HTU2x and SHT1x series, and improves upon the success of the SHT2x that came before it. In addition, the SHT31-DIS-B has a wide input voltage range of 2.4V-5.5V and includes temperature isolation and airflow cutouts as recommended for the optimal operation. Finally, in the case of environmental changes that could cause light condensation, the SHT31-DIS-B has a built-in heater to burn off any condensate.

  • Onyx 1.3M

    EV76C664 - Teledyne e2v

    Teledyne e2v’s Onyx family of image sensors are designed for the most demanding outdoor camera and industrial machine vision applications, where illumination budgets are restricted or where high-speed inspection is required.Teledyne e2v’s new Onyx EV76C664 is a 1.3 million pixel CMOS image sensor for low light applications. It has been designed using e2v’s advanced CMOS imaging technology and is ideal for many different types of application where premium performance imaging is required. The Onyx EV76C664 has an innovative pixel design which offers excellent performance in low-light conditions, but also caters for ‘all-light’ environments (typical of outdoor camera applications) where wide dynamic range is also needed.

  • Video/Audio Transmitter

    VT40 Series - Systems Engineering & Management

    The VT40 series of broadcast quality airborne dual power (.25/2 W) video transmitters are designed to transmit black and white or color video signals in the frequency bands covering 1710-1850, 2200-2400, or 2400-2500 MHz. The VT40 design includes single or dual audio/telemetry sub-carriers. These transmitters are true FM, modular, all solid state and are protected for operation into any VSWR, without damage, including open or short circuit. Rugged construction, minimum size and light weight make these transmitters ideally suited for airborne applications and where operation in harsh conditions is required. Transmitters may be ordered as fixed frequency or any number of channels in a given band, spaced in 0.5 MHz increments.

  • Webster Hardness Tester

    Mitech Co., LTD.

    Aluminum Webster tester is also called clamp type hardness tester, They are divided into MW, MW-20a, MW-20b three types, they are light and portable can be hold by one hand, do not need sample when testing, without high skill requirements. It can do fast NDT test of workpiece on site and meet the needs of quality control and qualified rate. It is widely used in production test, acceptance inspection and products quality inspection of aluminum industries and many companies of windows, door and curtain wall, as well as in engineering quality inspection and technical supervision departments. It is a necessary device in raising qualification rate and saving cost.

  • Streak Camera and Frame Cameras

    BIFO Company

    Our company serially produces a set of basic models of image converter cameras (ICC), as single-frame, and with multi-frame and linear (streak) sweep, in the majority on a basis of image converter tubes (ICT) frame ad streak types of our own design. Cameras find wide application in many areas of a science and technology at registration various fast running processes. Necessary high sensitivity of cameras up to a mode of the pack of single photons registration can be provided at registration of extreme low light processes. The limiting temporal resolution of unique experimental models of cameras lays in femtosecond range. The small sizes of the majority of our cameras allow to embed them into the structure of almost every optical and optico-electronic equipment easily.

  • SiC UV spectrometer

    SolGel Technologies GmbH

    World first: SiC-based UV spectrometerDue to the high visible blindness of the SiC material, precise UV spectrometry is now possible in the presence of strong visible radiation (no VIS scattered light effects).The high radiation hardness of SiC and its low dark current create an increased dynamic range compared to Si spectrometers.The first model in the new series is the UV line SiC128 (128 pixels, 220nm - 360nm). Variants with lower bandwidth and higher resolution are available.Other models with a smaller size and higher resolution are in co-development with our R & D partner, the Berlin-based Ferdinand Braun Institute.

  • Tone & Probe Kits

    Triplett

    ProTone Wire Locator Kit features a powerful tone generator and a filtered, ultra-bright lighted probe. The CTX590 functions as a high quality wire locating tool that uses an inductive probe to sense a tone placed on the wires by its associated tone generator. The tone generator provides RJ11, RJ45 and insulated alligator clip connections. The Red/Green LED on the probe indicates continuity, voltage, and polarity. The probe also includes an ultra bright LED tip, fluorescent light noise filter and sensitivity control. The CTX590 can be used for tracking down short circuits, telephone central office connections, and other wire locating applications. Includes (2) 9V batteries and case.

  • Photometer

    Optronik Line DSP 200 - Instrument Systems Optische Messtechnik GmbH

    DSP 200 offers outstanding sensitivity and stability for precise measurements even at very low illumination levels. The instrument meets, of course, all requirements of the newest standards, like EN 13032-1 and DIN 5032-7 (2017). A low-noise photo diode with V(lambda)-filtering and optimized electronics provides for a broad dynamic range from 0.1 mlx to 200 klx. At the same time the very high local resolution allows an accurate determination even of high gradients when measuring headlamps. Therefore, the DSP 200 is suitable for all automotive and traffic applications, as well as for flashlights and for measurements of all pulse width modulated light sources.

  • VOICE OF THOR

    THOR GUARD

    THOR GUARD's Voice of Thor or VOT lightning alarm system is utilized to provide a unique aubible warning pattern when the area THOR GUARD is monitoring has become susceptible to a lightning strike. Simultaneously during the hazard time, LED strobe lights can be utilized to provide a continued visible notification of the impending hazard. THOR GUARD allows for a base horn with the remotes, either electric or solar powered, being controlled using THOR GUARD’s dedicated RF system. When combined with the Guardian Emergency Notification System, a special 1-minute pattern is generated to provide for any unexpected emergency.

  • Laser Damage Measurement And Control System

    Beijing Pansino Solutions Technology Co., Ltd.

    This system uses laser technology to determine the degree of damage to the sample being tested. The system consists of four sub-systems, namely the laser control system (including laser, sample XY two-dimensional movement control, energy adjustment control (rotary wave plate )), beam parameter test system (CCD camera test spot spatial distribution, energy card meter) Measure the energy of each pulse of the beam, oscilloscope measures the time distribution of the beam), damage determination system (photomultiplier tube to measure the photoelectric signal , CCD to measure the scattered light imaging map), data processing and control system.

  • Ultrasonic Precision Gages

    UPG-07 Monochrome - Danatronics Corporation

    PG-07 Series of hand held ultrasonic precision gages are available in 4 models. Our UPG-07 series is the ideal unit to non-destructively test the wall thickness for manufactured parts requiring unprecedented accuracy and resolution. The UPG-07 series utilizes single element transducers and offers a 30 Mhz, square wave pulser, .0001" or 1 micron resolution with the ability to store and re-call 30 unique applications. So if you are measuring light bulbs, plastic bottles, golf clubs, coil steel, thin aluminum, aircraft parts and even pure gold bars, the UPG-07 series is the right choice.

  • ICP/IEPE Accelerometer

    Bustec Ltd.

    Are a class of piezoelectric accelerometers that incorporate an electronic amplifier and use a single two-pole coaxial connector for both power input and signal output.[1] The devices are also known by proprietary names such as integrated circuit piezoelectric sensor (ICP).[2] Compared with earlier sensor interface systems requiring a charge-sensitive preamplifier external to the sensor, the use of a single coaxial connector with integrated electronics gives IEPE devices their main advantages: small size, light weight, robustness and low cabling costs. Microphones and other vibration sensors are also made using an IEPE-compatible interface.

  • Spectral Plotting Tool

    SearchLight™ - Semrock, Inc

    SearchLight is a free, online spectral plotting and analysis tool that allows fluorescence microscope users and optical instrument designers to model & evaluate the spectral performance of fluorophores, filter sets, light sources, and detectors as components of an overall system. Its intuitive user interface makes it easy to manipulate spectral component specifications and plot spectral results. The System Calculator allows the user to quantify system metrics including signal, SNR, and bleed through; as well as to compare various system configurations against each other. earchLight App available for iOS and Android

  • Surge Generators

    K&S Engineering and Scientific Ltd

    The instrument is fully enclosed in a robust all steel enclosure mounted on castors and fitted with carrying handles. The control panel forms the top of the case, it is finished in high gloss light blue stoving with cutter engraved labelling, and is protected by a detachable lid. The EHT outlet is of a recessed type designed to prevent accidental contact with high voltages. Surge repetition is electronically controlled from 0 to 10 seconds, a single surge or a train of pulses can be selected by a panel mounted switch. Automatic discharge of the instrument is achieved by a gravity operated switch which is released on switching 'OFF' the instrument or on disconnecting the supply.

  • WDXRF Spectrometer

    S8 TIGER Series 2 - Bruker Optics

    Thanks to HighSense technology the S8 TIGER Series 2 WDXRF spectrometer delivers for all elements accuracy and precision for industrial quality and process control. With high resolving WDXRF technology and optimal detection of light, medium and heavy elements based on the new HighSense beam path, the XRF2 mapping tool of the S8 TIGER Series delivers best sensitivity, smallest spot size, and highest resolution for small spot applications. Ergonomic and failsafe operation are vital for efficiency and best analytical data. Simple, intuitive start of samples are guaranteed with the multilingual TouchControl interface.