Filter Results By:

Products

Applications

Manufacturers

Light

Visible spectrum of electromagnetic radiation from 400nm to 700nm.

See Also: Illumination, Lighting, Lightning, Lightwave, Daylight, Luminescence


Showing recent results 1426 - 1440 of 1991 products found.

  • Digital Clamp Meter

    KT7192 - Ketai instrument (kunshan) Ltd.

    *3 1 /2 digit LCD display max.reading 1999 digits *Data-Hold-Function *Back Light*AC Current measurement up to 2000A(±2.5%+10d)*DC voltage measurement up to 1000V(±1.0%+5d)*AC voltage measurement up to 750V(±1.0%+25d) *Resistance measurement up to 2000k ohms(±1.0%+5d)*Diodes and continuity test (acoustical signal) *Clamp opening:57mm Power Supply: 9V 6F22*Designed and built according to EN61010, CAT II 1000V ,CAT III 600V

  • Dome Cameras

    WONWOO

    1/3" 2MP Panasonic CMOS sensor 1080p 60fps / 30fps, 720p 60fps HD-SDI, EX-SDI, CVBS, TVI(Option) x3 Optical Zoom(3mm ~9mm) & x32 Digital Zoom Day & Night(ICR) Real-time True WDR Digital Noise Reduction(2D+3D) Privacy Mask Function High Light Compensation Defog Function Motion Detection Protocol(VISCA, Pelco-D/P) 22pcs IR LED(IR Distance 18m, MP-038-22 only)

  • Double Monochromators/Spectrographs

    Omni-λxxxD - ZOLIX

    Omni-λxxxD series Double Monochromators/Spectrographs The Double Monochromators/Spectrographs include two 300 mm focus monochromators( or 500 mm, 750 mm focus) which are with fine alignment. Double Monochromator has the dispersion subtraction mode and dispersion sum mode. Using dispersion sum mode, the double monochromator / spectrograph spectral resolution can be doubled, suitable for high resolution measurement. Using dispersion subtraction mode, the double monochromator / spectrograph stray light can be reduced effectively, suitable for weaker signal detection, such as Raman spectral measurement.

  • Dry Dielectric RF Coaxial Loads

    4000 Series - Coaxial Dynamics

    These 50-Ohm RF Load Resistors are light weight, dry coaxial loads that can be used in any position. All power ratings are for continuous operation. However, data is available for special applications and pulsed power conditions. Any of our Quick Match connectors can be used on these loads. Should you desire a connector other than the one included, it should be specified when ordering.

  • Dry Dielectric RF Coaxial Loads

    Coaxial Dynamics

    These 50-Ohm RF Load Resistors are light weight, dry coaxial loads that can be used in any position. All power ratings are for continuous operation. However, data is available for special applications and pulsed power conditions. Any of our Quick Match connectors can be used on these loads. Should you desire a connector other than the one included, it should be specified when ordering.

  • Dual LED series

    AMS Technologies AG

    The Dual LED series consists of a 660nm (red) LED and a companion IR LED such as 880/ 895, 905, or 940nm. They are widely used for ratiometeric measurements such as medical analytical and monitoring devices. They can also be used in applications requiring a low cost Bi-Wavelength light source. Two types of pin configurations are available: 1.) three leads with one common anode or cathode, or 2.) two leads parallel back-to-back connection. They are available in two types of packaging. Clear lead frame molded side looker, and leadless ceramic substrate.

  • DC Coreless Motor

    Adamant Namiki Precision Jewel Co Ltd.

    There is a structure in the cage shape by only the copper wire turns around a cylindrical permanent magnet placed inside It is a feature. There There is not an anron core, it does not receive the action of the copper basket type rotor is light, the moment of inertia becomes small, so quick response is possible. A Permanent Magnet, There Is No Cogging, That Is, Rotation Is Smooth, And Vibration And Noise Can Be Reduced. - Since Rare Earth Magnets With High Magnetic Properties Are Used And The Rotor Is Formed Only With Coils, The Motor Itself Can Be Made smaller and lighter.

  • Electrical / Air / ABS Tester

    Inspector 920 - LITE-CHECK

    The Advanced ABS diagnostic trailer tester with brake and light testing takes the guesswork out of trailer repairs. LITE-CHECK 3-Step ABS Process will cut ABS troubleshooting time in determining ABS problems. The Inspector 920 includes all of the PLC ABS codes dating from 2001 and with the latest Roll Stability codes eliminating multiple operations and tools in one simple process. The tester automatically identifies the ABS ECU issues and displays the necessary information to make repairs.

  • Electrical Testers

    PowerScan PS100 - Autel

    The PowerScan Tool is the most revolutionary circuit tester to date. Featuring AVOmeter, test light, built-in flashlight, short circuit indicator, relay/component tester, continuity tester and bad ground indicator, the PowerScan is truly the ultimate in power and affordability, allowing users to check circuitry in one single step. An absolute must for every technician looking for a fast and accurate solution to electrical system diagnostics.

  • Electronic Attack Synthesizers

    Frequency Electronics, Inc.

    The VMESG 1003, 2-20GHz Synthesizer was developed as a “Synthetic Instrument” for flight line test equipment, where its small size, light weight and high performance characteristics are paramount. The modular design of this instrument allows for many performance and interface options. Elcom‘s VME Series Synthesizers are similar in design to the IBS Series with the added benefit of an extremely compact 2 slot design. WIDE FREQUENCY RANGE: 2.0 to 20 GHz

  • ELECTRO OPTICS

    AMS Technologies AG

    Optical birefringence is induced in an electro optic crystal such as KD*P or BBO when a high voltage is applied. A Pockels cell makes use of this effect, rotating the plane of polarisation of light or of a laser beam passing through the cell. When used together with a polariser, these cells can function as optical switches, or laser Q-switches.The electro optics devices in our portfolio feature high repetition rates for high power applications.

  • ESR Meter

    HecKits

    measures ESR from .2 ohm to about 30 ohmleft LED lights at 30 ohm, far right at .2 ohm30 turn POT allows full scale calibrationUses 50 kHz frequency at 200 mv for testCan test capacitors in circuit without biasingon solid state junctions.> Mini gold plated banana jacks> measures 4.5 x 2.5 x 1.5 inches> 9 volt battery operation

  • ELECTROSTATIC FIELDMETER

    S2001 - Statico

    The S2001 is designed to locate and measure static charge potentials on product, people, equipment and packaging. The instrument uses a non-contacting, chopper stabilized field sensor and a ranging light mechanism to ensure correct measurements of electrostatic fields in all areas- even those using air ionization. The Fieldmeter is easily zeroed with the turn of a small knob and does not require re-zeroing between measurements. Powered by a 9 Volt battery, the S2001 features a conductive case and a convenient snap-on ground lead to facilitate grounding and increase accuracy. NIST Certified.

  • Electrostatic Field Meter Micro Kit

    PFM-711A - Prostat Corporation

    A hand held, compact, electronic digital chopper field meter used for locating and measuring electrostatic fields.Use alone to measure fields on defined surfaces and materials. Red "Bulls Eye" ranging lights assist in obtaining reproducible measurements.Use with CPM-720A Charge Plate Assembly and PCS-730 Charging Source to balance and test ionization blowers and devices. May be used to measure charge generation related to personnel, floors, chairs, carts, equipment, packaging materials, etc.

  • Energy Dispersive Spectroscopy (EDS) Platform

    Octane Elect EDS System - EDAX

    The Octane Elect EDS System is an enhanced Energy Dispersive Spectroscopy (EDS) platform with the latest advancements in Silicon Drift Detector (SDD) technology and high speed electronics. Tailored for users who demand higher performance and functionality than the options available in entry-level systems, the Octane Elect EDS System provides excellent resolution and high throughput at an optimal value with a remarkable low energy sensitivity for light element detection and low voltage (kV) microanalysis.