Showing results: 316 - 330 of 851 items found.
-
8712-6 -
TEGAM Inc.
For fast response temperature measurements of gases, surfaces, or liquids. These 3-ft long, Type-K probes, (8712) are constructed with fiber-glass insulated, 24-ga wires welded at the tips. Model 8712-6 are 6-ft in length.
-
8712 -
TEGAM Inc.
For fast response temperature measurements of gases, surfaces, or liquids. These 3-ft long, Type-K probes, (8712) are constructed with fiber-glass insulated, 24-ga wires welded at the tips. Model 8712-6 are 6-ft in length.
-
HE-960LF / FS-09F-1/2 -
HORIBA, Ltd.
It is effective to keep the dilution of Slurry constant. Maintaining an appropriate conductivity value contributes to process stability in the wafer polishing process. Even highly viscous sample liquids such as CMP Slurry can be measured without problems because they use a sensor structure that reduces the risk of the sample liquid sticking to the electrodes. In addition, the sensor is made of a wetted material with excellent chemical resistance, which meets the cleanliness requirements of semiconductor processes. In addition to the above, it can also be used for introduction at the semiconductor process development stage and conductivity control of special chemicals.
-
DRK66902W -
Shandong Drick Instruments Co., Ltd.
DRK66902 Abbe refractometer is instrument of measuring refractive rate nD of transparent, translucent liquid or solid and the average dispersion nD-nC (of which measured transparent liquid based). For example, instrument connected with the thermostat can determine refraction rate nD within temperature 10 DEG C for 50. Its use of visual sight, optical dial readings, temperature display, so it’s simple and reliable. The base consists of stainless steel material, and the prism is made up of hard glass, so it is not easy to wear out.
-
WIKA Alexander Wiegand SE & Co. KG
Flow switches are used for the display and monitoring of the flow of liquid and gaseous media. The instruments feature a high switching accuracy and functional safety, low switch hysteresis and continuous switch point setting by the user.
-
Dielectrotest -
Amperis sl
The Dielectrotest is a fully automatic dielectric oil meter for determining the breakdown voltage of insulating liquid. It is designed for both laboratory and field use for commissioning and maintenance purposes. The test standard is selected via menu.
-
CHANGSHA KAIYUAN INSTRUMENTS CO., LTD.
Adopts energy dispersive X-ray fluorescence spectrum (EDXRF), which is a qualitative and quantitative analysis technique for rapid and nondestructive determination of major and minor elements in various types of samples (solid, powder, liquid).
-
AIRIS -
Physical Sciences Inc.
The Adaptive Infrared Imaging Spectroradiometer (AIRIS) has been developed for real-time standoff detection of chemical vapors and biological aerosols as well liquids and solids (such as chemical agents and trace explosive residues) on surfaces.
-
AF16-N -
optek
High precision sensor for direct installation into pipelines measuring NIR light absorption of various liquid samples. The optical path length can be individually configured to meet the process control requirements with the highest accuracy.
-
AF56-N -
optek
AF56-N is a high precision sensor for direct installation into pipelines measuring NIR light absorption (turbidity) of various liquid samples. The optical path length can be individually configured to meet the process control requirements.
-
THW-L2 -
Thermtest Instruments
Designed with speed and operational simplicity in mind, the Transient Hot Wire (THW-L2) Liquid Thermal Conductivity Meter is an advanced measurement system for direct determination of the thermal conductivity of liquids and pastes in accordance with ASTM D7896-19. In less than 2 seconds, a single measurement of small volumes of liquids and pastes can be accurately and precisely measured for thermal conductivity. Using a non-stationary measurement approach, the THW-L2 uses rapid test times to limit convective effects for samples with a wide range of viscosities. The THW sensor consists of a 60 mm heating wire that is fully inserted into an isothermal sample. A constant current source (q) is used to heat the sensor wire and the temperature rise is recorded by monitoring the change in electrical resistance of the wire. The slope (m) is determined from the plot of temperature rise vs. logarithm of time and is used in the calculation of thermal conductivity (λ). Liquid samples of high thermal conductivity will have a lower slope, while liquid samples with low thermal conductivity will have a higher slope.
-
SPM-8100FM -
Shimadzu Corp.
The new HR-SPM scanning probe microscope uses frequency detection. his instrument is not only capable of ultra-high resolution observations in air or liquids, but for the first time enables observations of hydration/solvation layers at solid-liquid interfaces.
-
2285 -
Georg Fischer Signet
The 2285 Level Float Switch is suitable for level switching of various liquids, sewage in shafts, tanks, basins or cisterns. The double-chambered float is made of injection molded tough polypropylene that ensures good waterproof protection.
-
Verax SSG & SSL -
JP3 Measurement, llc
They provide rapid and reliable measurement of key compositional and physical properties for a wide variety of natural gas analysis (Verax SSG) and liquid (Verax SSL) applications in crude oil, condensates, NGLs and refined fuels.
-
HD2156.2 -
Delta OHM S.r.L.
pHmeter-Conductivity-Thermometer measures pH, mV, conductivity, liquid resistivity, total dissolved solids, salinity and temperature. Datalogger, stores the maximum, minimum, average value and can store up to 20,000 sets of three measurements.