Filter Results By:
Products
Applications
Manufacturers
-
product
High-Performance Liquid Chromatograph Mass Spectrometer
LCMS-2050
The LCMS-2050 single quadrupole mass spectrometer combines the user-friendliness of an LC detector with the excellent performance of MS to provide a complete package of easy-to-use high-level performance and compactness. To make it accessible to all users, the system is enhanced with technology and functions to ensure that even technicians unfamiliar with mass spectrometers can easily and efficiently perform analysis. While delivering operational convenience on par with an LC detector, the LCMS-2050 can rapidly analyze compounds of a wide mass range with high sensitivity, continuing the tradition of excellence recognized with Shimadzu mass spectrometers. Capable of analyzing a wide range of compounds from high to low polarity, the LCMS-2050 can be used in a variety of markets and applications. This new mass spectrometer system is also equipped with data analysis features using Analytical Intelligence and eco conscious functions, which contribute to labor and energy savings in the laboratory.
-
product
Portable or Stationary Ultrasonic Flowmeter for Liquids
DUC
Two ultrasonic clamp-on transducers are externally mounted on a pipe and produce an acoustic path. The transducers send and receive acoustic signals and their transit times are measured by an electronic flow transmitter. The signal is accelerated by the flow in the forward direction. The return signal is decelerated by the flow in the opposite direction. The difference in time between the two, together with the path length L, can be used to determine the average flow velocity. This principle is known as the acoustic time-of-flight principle.
-
product
Off-line Automated Liquid Handling Station
SimPrep
- Wide range of syringes from 10 μL to 50 mL- A single system can serve multiple techniques such as ICP-MS, ICP, AA, Colorimeter, IC, FIA- An extra autosampler - easily switch between sample prep and sample analysis with a switching USB hub (see below).
-
product
OEM Sensors For Liquid Analytical Measurements
*Connect Sensors Directly to the OEM’s control or monitoring system*Connect Sensors via MODBUS RTU*Connect Sensors via USB*Intelligent Sensor: Stores Identity and Calibration Information*Replaceable Electrode Cartridges: Application Specific Solution*Replaceable Electrode Cartridges: Low cost of Ownership*Insertion/Submersion with adjustable gland fittings and Valve *Retractable Designs*Wide Variety of Materials of Construction for Industrial Applications
-
product
Temperature Control Device for Liquid Electrode
SF600
Shanghai Launch Electric Co., Ltd.
This device is specially designed to control temperature for insulation oil measuring electrode. It could be used together with universal cylinder insulation oil electrode. This device ensures that the insulation oil will get a required temperature and keep at this temperature for long. Thus tgδ and εr could be measured through high voltage electrical bridge.
-
product
Magnetic Float Type Liquid Level Gauge
HR9210
HighReach Measuring & Controlling System Co.,Ltd
The HR9210 magnetic float type liquid level gauge is a measuring instrument that reflects the measured liquid level or interface by the magnetic float as the sensing element and through the coupling of the magnetic float and the magnetic body in the display color strip.
-
product
Digital Liquid Mass Flow Meters / Controllers
LF-F/LV-F Series
The LF-F and LV-F Series are digital liquid mass flow controllers using a Peltier element which cools the liquid rather than using the more common method of thermal heating. This technique removes the risk of boiling chemicals with a low boiling point, thus allowing for greater chemical control.
-
product
Leak Detect Stik Liquid Level Sensor
7100
The 7100 leak detect stik is a liquid level sensor that takes field proven magnetostrictive sensing technology and packages it in a revolutionary new way for greater reliability and for easy installation and mounting.The 7100 leak detect stik has PPM (Pulse Position Modulated) outputs for product and interface level and for temperature measurement, which are all superimposed on the two wire power line.All sensor electronics used in this liquid level sensor are SMT components integrated into the 5/8” diameter sensing tube. This breakthrough in package design eliminates the bulky electronics enclosure at the top of the sensor and offers you greater options for insertion.
-
product
Input High Temperature Liquid Level Transmitter
HR8005
HighReach Measuring & Controlling System Co.,Ltd
HR8005 input high temperature liquid level transmitter is used to measure the water level and water temperature change of high temperature surge well, digital temperature error compensation in full temperature zone, and store the compensation parameters in non-volatile memory.
-
product
Vertical Entry Liquid Level Pressure Sensor
LL-V
The rugged Model LL-V vertical entry submersible liquid level sensor from Honeywell Sensotec can be suspended in an open tank or attached to the crown of an enclosed tank and used to any depth. The atmospherically vented oceanographic cable assembly exits through a 1/2-14 NPT threaded conduit connection that allows mechanical or chemical protection tubing or pipe to be threaded on over the cable.
-
product
Analyzer for Solution for Measuring Sulfur in Liquid Applications
SLA-1000
The ATOM SLA-1000 is an online process analyzer utilizing patented Excimer UV Fluorescence (EUVF) Technology to measure Total Sulfur in Liquid in a variety of refinery process applications.ATOM Instrument offers the most versatile Total Sulfur analyzers available. The ATOM SLA-1000 has the fastest analysis time of any commercially available analyzer allowing user-defined , multiple cycle averaging to improve analyzer performance. The analyzer operating software is both intuitive and user-friendly. In addition, the SLA-1000 requires only bottled air (no other gases needed for carrier or combustion) during normal operation and does not require installation in a shelter.
-
product
Preparative High Performance Liquid Chromatography System
ACCQPrep HP150
Compared to Flash chromatography, High-Performance Liquid Chromatography (HPLC) operates under a higher pressure and uses columns of a smaller particle size for higher efficiency and increased resolution for purer results.HPLC is divided into analytical and preparative forms. Prep HPLC uses larger particles, meaning less surface area for the stationary phase, a higher flow rate and, generally, less pressure than analytical HPLC. Flash and prep HPLC are both used to purify large sample quantities; in analytical HPLC, the goal is to achieve the highest resolution possible to observe each unique compound in the sample. Explore the ACCQPrep® HP150 from Teledyne LABS to discover why ISCO is known worldwide for Prep HPLC.
-
product
Large Flow Liquid Source Vaporization Control System
LE Series
A high-flow, high-efficiency, liquid vaporizer with flow channels and heater elements embedded in a cast aluminium block which ensures maximum heat transfer, and the elimination of both cold spots and the risk of condensation. This Liquid Source Vaporization Control System can operate at up to 300 °C and can vaporize up to 30g/min of IPA (or equivalent).
-
product
VITA 48.4 Liquid Flow-Through (LFT) ATR Platform
VITA 48.4 LFT ATR
Elma Electronic’s rugged OpenVPX ATR platform is designed to accommodate boards requiring liquid flow-through (LFT) cooling per the VITA 48.4 standard. VITA 48.4 establishes the mechanical design interface, outline and mounting requirements for 6U OpenVPX liquid-flow-through cooled plug-in modules within associated sub-racks.
-
product
Digital Brix Refractometer - for Measuring Dissolved Sucrose in Liquids
Extech RF153
Extech Instruments Corporation
Take quick and accurate % Brix or Refractive Index (RI) measurements of dissolved sucrose level in liquids for beverage and food production, determine maturity of fruits and plants, or control the concentration of industrial fluids (such as cutting coolants, hydraulic fluids, and antifreeze) to extend equipment life and prevent corrosion. Fast three second response time, the LCD displays %Brix or RI and Temperature. The RF153 fits in the palm of your hand and it features built-in ATC, single Zero calibration, prism cover, and auto memory storing 10 readings. Rugged low maintenance water resistant (IP65) housing with convenient side spouts for easy drainage.
-
product
Quadrupole Time-of-Flight Liquid Chromatograph Mass Spectrometer
LCMS-9030
The LCMS-9030 quadrupole time-of-flight (Q-TOF) mass spectrometer integrates the world's fastest and most sensitive quadrupole technology with TOF architecture. A product of Shimadzu's engineering DNA, speed and effortless performance enable the LCMS-9030 to address qualitative and quantitative challenges with genuine confidence and ease. The LCMS-9030 uses newly patented technologies to deliver both high resolution and accurate mass, attributes essential for confident formula assignment and unknown identification.
-
product
Extremely Low Noise Liquid Nitrogen Cooled Cameras
PyLoN® IR
Teledyne Princeton Instruments
The PyLoN® IR offers high-performance NIR/SWIR spectroscopy with a cryogenically cooled InGaAs detector with fast spectral rate and lowest system read noise.
-
product
VITA 48.4 Liquid Flow Through Development Chassis
VITA 48.4
Power hungry OpenVPX modules require a cooling solution guaranteed to keep the mission on course. From the experts in packaging for extreme environments comes the VITA 48.4 LFT test and development chassis.
-
product
Safety Liquid Leak Sensor [Control Category 4PLE SIL3]
SQ4 Series
Panasonic Industrial Devices Sales Company of America
The SQ4 Series Safety Liquid Leak Sensor detect leaks and curbs danger resulting from them.The two-part design, consisting of the Sensor and the mounting bracket, simplifies installation. The Sensor itself incorporates a two-stage detection. The detection unit at the front of the Sensor issues a warning if it comes into contact with liquid, and the detection unit in the center of the Sensor initiates an emergency stop if it becomes immersed in liquid.To provide utmost flexibility, a chemically resistant version is also available. Up to 4 Safety Liquid Leak Sensors can be connected to the SQ4-C11 Controller.
-
product
High Performance Liquid Chromatograph Triple Quadrupole Mass Spectrometer
LCMS-8045
Equipped with a heated ESI probe, the LCMS-8045 has the highest sensitivity in its class. The heated ESI probe, high-temperature heating block, desolvation line (DL) and drying gas, all act to promote desolvation and prevent contamination due to the penetration of liquid droplets into the MS unit. This improves the robustness, so reliable and high-accuracy data can be obtained over the long term. The LCMS-8045 also achieves the world's fastest scan speed (30,000 u/sec) and polarity switching speed (5 msec). These enable ultra-high-speed, high-sensitivity analysis. The excellent cost performance of this system is demonstrated in food safety, environmental analysis, and other quantitative analyses, it can be upgraded to the LCMS-8060.
-
product
Laboratory Analyzer for Total Sulfur and Total Nitrogen for Gases and Liquids
XT-2000
XT-2000 is the most innovative laboratory analyzer on the market for reliable total sulfur and total nitrogen measurement on the market today. The XT-2000 laboratory analyzers are designed and built for precise, accurate and reliable analysis with the flexibility that allows the measurement of a wide range of samples with a single instrument.
-
product
Head-separated Dual Display Digital Pressure Sensor [For Gas & Liquid]
DPC-L100 / DPH-L100
Panasonic Industrial Devices Sales Company of America
Single-Axis Type Digital Pressure Sensor With Optional Dual 3-Color Display
-
product
High Performance Liquid Chromatograph Triple Quadrupole Mass Spectrometer
LCMS-8050
Thanks to a heated ESI probe and the UFsweeper III collision cell, the LCMS-8050 achieves a level of sensitivity 30 times that of the LCMS-8030.The UF Technology, the ultrafast measurement technology built into the LCMS-2020 has further evolved, so measurements can now be performed even faster, without sacrificing data quality. At the same time, more compounds can now be measured in simultaneous qualitative and quantitative analysis. The system can be used in a wide range of fields for a variety of applications, such as quantitative analysis which requires high sensitivity, multicomponent simultaneous analysis, and screening.
-
product
L40 Series Vertical Mount Polypropylene Plastic Liquid Level Switch
Most versatile and durable of the vertical liquid level switch line. Highly compatible with numerous liquids :acids, water, bases.
-
product
L25 Series Side Mounted Polypropylene Plastic Liquid Level Switch
L25-20-S1-20-NO
The L25 Series Side Mounted Polypropylene Liquid Level Switches are among the most versatile and durable of the side-mounted liquid level switch line. The polypropylene wetted material makes the switch highly compatible with numerous liquids from acids, to water, to bases. The side mount provides added versatility, allowing the switch to be used as a high or low level indicator, and plastic body provides use up to 100 PSI.
-
product
L20 Series Side Mounted Polypropylene Plastic Liquid Level Switch
L20-20-S1-20-NO
The L20 Series Side Mounted Polypropylene Liquid Level Switches are among the most versatile and durable of the side-mounted liquid level switch line. The polypropylene wetted material makes the switch highly compatible with numerous liquids from acids, to water, to bases. The side mount provides added versatility, allowing the switch to be used as a high or low level indicator, and plastic body provides use up to 100 PSI.
-
product
L27 Series Side Mounted Polypropylene Plastic Liquid Level Switch
L27-20-S1-20-NO
The L27 Series Single-Ended Side Mount Polypropylene Liquid Level Switches are among the most versatile and durable of the side-mounted liquid level switch line. The polypropylene wetted material makes the switch highly compatible with numerous liquids from acids, to water, to bases. The side mount provides added versatility, allowing the switch to be used as a high or low level indicator, and plastic body provides use up to 100 PSI.
-
product
L22 Series Side Mounted Polypropylene Plastic Liquid Level Switch
L22-20-S1-20-NO
The L22 Series Single-Ended Side Mount Polypropylene Liquid Level Switches are among the most versatile and durable of the side-mounted liquid level switch line. The polypropylene wetted material makes the switch highly compatible with numerous liquids from acids, to water, to bases. The side mount provides added versatility, allowing the switch to be used as a high or low level indicator, and plastic body provides use up to 100 PSI.
-
product
3.4 MP Autofocus (Liquid Lens) Low Light Camera Module
e-CAM31_MI0330_MOD
e-CAM31_MI0330_MOD is a high performance, small form factor, 3.4 MP Autofocus Low Light Camera Module with Liquid Lens. It is based on AR0330 CMOS Image sensor from ON Semiconductor®. This Autofocus Liquid Lens Camera Module has slave mode for precise frame-rate control and for synchronizing two sensors. e-CAM31_MI0330_MOD – Liquid lens camera module has superior low light performance. It supports Full HD @ 60fps for maximum video performance. It also has a support for external mechanical shutter and an on-chip phase-locked loop (PLL) oscillator. The dedicated ISP performs the entire Auto functions like auto white balance, auto exposure control in addition to complete image signal processing pipeline.
-
product
L20 Series Side Mounted CPVC Plastic Liquid Level Switch
L20-16-S1-16-NO
The L20 Series Side Mounted CPVC Plastic Liquid Level Switches are typically used in water and potable water applications. The side mount provides added versatility, allowing the switch to be used as a high or low level indicator, and plastic body provides use up to 100 PSI.
