Showing results: 406 - 420 of 1315 items found.
-
Model BOX -
Laurel Electronics, Inc
Model BOX is a wall-mount / bulkhead enclosure which provides environmental protection to IP65 / NEMA-4X. It comes with a 1/8 DIN panel cutout (45 x 92 mm) and can be used with 1/8 DIN instruments with a depth up to 134.5 mm (5.30"). This includes all 1/8 DIN instruments sold by Laurel Electronics.
-
Pinnacle 250 -
VIEW Micro-Metrology
The Pinnacle features a damped granite base and column, with passive vibration isolation. A precision compound X-Y stage with high-speed linear motor drives provides velocity of 400 mm / sec and acceleration of 1000 mm / sec2. This combination of high acceleration and high velocity enables the high throughput required for near-line process monitoring.
-
INSPECTOR® 36 -
Camtronics bv
The improved robust Inspector® 36 is very suitable to inspect smaller pipelines thoroughly. The spherical camera head with flexible spring goes easily through right-angle bends from a diameter of 50 mm. Blockages and damage to pipes can thus be traced adequately. The working range of the camera is from 50 to 200 mm.
-
GF-A -
High Power Pulse Instruments GmbH
*Compatible with GGB picoprobe model 10 replacement probe tips*<1 ns rise time (200 ps possible with 5 mm GND wire length)*Custom selectable GND wire length 5-15 mm*Gold-coated spring-steel clamp with micro-machined groove for locking of the clamps on the probe tip*High conductivity and low inductance copper HF litz wire with 200 x Ø 0.02 mm strands*Easy to use clamping*Tungsten carbide probe needle with 1 inch length, 15° taper and 7.5 µm tip radius
-
PP007-WS-1 -
Teledyne LeCroy
The PP007 embodies leading technology in passive probe design. The small probe is optimized for maximum waveform fidelity, including high frequency signal components, in a rugged probe suitable for every day.The sharp probe tip* is spring loaded, allowing it to retract into the narrow probe head. The tip does not slip off the object being probed—important when probing small geometry surface-mounted components. Probing dense circuits is easier with the small 2.5 mm ground sleeve, which provides much better visibility than 5 mm and 3.5 mm probes.
-
PP007-WR-1 -
Teledyne LeCroy
The PP007 embodies leading technology in passive probe design. The small probe is optimized for maximum waveform fidelity, including high frequency signal components, in a rugged probe suitable for every day.The sharp probe tip* is spring loaded, allowing it to retract into the narrow probe head. The tip does not slip off the object being probed—important when probing small geometry surface-mounted components. Probing dense circuits is easier with the small 2.5 mm ground sleeve, which provides much better visibility than 5 mm and 3.5 mm probes.
-
OptoScope SC-20 systems -
Optronis GmbH
The SC-20 streak camera system is characterized by its large detection area of 35 mm x 4 mm and a large usable screen diagonal of 40 mm. Signals are mapped onto the fiber optic input window and measured without the need for optical reduction. In the simplest case, the entrance optics consists of a slit mask that lies directly on the entrance window. In addition, a flexible extension with a shutter, a lens mount or an adjustable slot with coupling optics is possible. The time resolution in the sub-nanosecond range qualifies the camera for many applications in detonics and plasma physics.
-
-
U5404A -
Keysight Technologies
This 18 mm test probe is highly recommended for CAT IV environment and is compatible with the U1281A/82A handheld DMMs
-
M-XY10 -
R&J Measurement
The JM-XY10 yoke is designed to measure dynamic magnetic properties of tested materials under alternating and rotational field. The measuring could by made on square samples (side: 60÷100 mm) or circle samples with diameter 60÷85 mm. The JM50 yoke could be cooperating with following equipment designed to measuring soft magnetic properties:
-
Pro -
RangeVision cis
Capable of scanning objects of different shapes and sizes by changing the scanner's field of view (FOV). Due to the use of the structured light technology, professional RangeVision 3D scanners provide highly detailed scans of any type of object, from jewelry to large automobiles, with accuracy up to 0.018 mm and resolution up to 0.03 mm.
-
CM-51SR-EC -
Taylor Dynamometer, Inc.
Weight Capacity: 25,000 lb (11,340 kg) per axleRoll Brakes: pneumatically-actuated discShipping Weight: 5,100 lb (2,312 kg)Capacity: 311 hp at 45 mph (232 kW at 72 kph)Rolls: 20 by 36 in. (508 by 915 mm) long, 2 fixedPit Required Depth: 25 in. (635 mm)
-
CM-51S-EC -
Taylor Dynamometer, Inc.
Weight Capacity: 25,000 lb (11,340 kg) per axleRoll Brakes: pneumatically-actuated discShipping Weight: 5,100 lb (2,312 kg)Capacity: 311 hp at 45 mph (232 kW at 72 kph)Rolls: 20 by 36 in. (508 by 915 mm) long, 4 fixedPit Required Depth: 25 in. (635 mm)
-
TD-36S-AC -
Taylor Dynamometer, Inc.
Weight Capacity: 30,000 lb (13,608 kg) per axleRoll Brakes: Pneumatically-actuated discShipping Weight: 19,700 lb (8,936 kg)Capacity: 460 hp at 40 mph (343 kW at 64 kph)Rolls: 36 by 31 in. (915 by 787 mm) 2 fixed rollsPit Required Depth: 35 in. (889 mm)
-
Insight Product Company
Insight Product Company offers IMPATT diodes with CW power up to 400 mW and operational frequency range up to 140 GHz. Silicon p+-p-n-n+ IMPATT diodes are designed to be used in the millimeter wave oscillators and amplifiers. They are fabricated in the metal-ruby packages with hard-lead carrier (diameter 3.0 mm, 1.5 mm).