Showing results: 706 - 720 of 1323 items found.
-
V1250 -
CAEN S.p.A.
The V1250 is a 16 channel differential to single ended signal converter in a 1-unit wide VME 6U form factor. It provides differential inputs (34-pin 2.54 mm header, Zdiff = 100 Ω) and single ended outputs (coaxial LEMO, Rout = 50 Ω).
-
YMP30-S -
Helmut Fischer AG
The hand-held sealing quality tester measures the admittance (Y) of anodic oxide films according DIN EN ISO 12373-5 and ASTM 457-67. Measuring range 3 200 S, with test cell 13 mm diameterInstrument calibration with optional accurate electrical reference
-
Advantech Co. Ltd.
Advantech UTX motherboards are the smallest industrial motherboard form factor which measure 116.8 X 111.8 mm. Equipped with max connectivity, low power consumption with wide temp, and fanless design, UTX motherboards are ideal for AI, robotics, IoT gateway solutions.
-
Advantech Co. Ltd.
Advantech Industrial ATX motherboards series measure 305 x 244 mm and support up to 7 expansion slots. With Intel Core family of processors, our Industrial ATX Industrial Motherboards reach high performance and offer a wide range of computing capacities.
-
Q7-BASE -
ADLINK Technology Inc.
Qseven is a Computer-on-Module (COM) standard for small sized and highly integrated systems adopted by SGET. The Qseven concept is an off-the-shelf, multi-vendor, Computer-on-Module that integrates all the core components of a common PC and is mounted onto an application specific carrier board. Qseven modules have a standardized form factor of 70 mm x 70 mm or 40 mm x 70 mm and have specified pinouts based on the high-speed MXM connector, regardless of the vendor. The Qseven module provides the functional requirements for an embedded application, which include, but are not limited to, graphics, audio, mass storage, network and multiple USB ports. A single ruggedized 230 pin MXM connector provides the carrier board interface to carry all the I/O signals to and from the Qseven module. This MXM connector is a well-known and proven high-speed signal interface connector that is commonly used for -PCI Express graphics cards in notebooks.
-
LIR320 -
New Infrared Technologies
*LIR320 is the perfect system for IIoT and Machine Vision applications.*With a resolution of 320×240 pixels and state-of-the-art pixel pitch of 12 μm, it is offered with two optical options, 4 mm and 9.1 mm, giving you calibrated, high-quality thermal images, at a frame rate of 27 Hz.*The camera LIR320 is a cost-effective imaging solution that provides maximum performance in multiple industry applications.
-
HP2540-9TB1G -
ELMA Electronic, Inc.
DC/DC converter with 192 W from Bel Power Solutions | input ranges 16.8 - 137.5 VDC | two outputs at 15 V | operates in temperatures from -40 to +71 °C | provides 10 ms hold up time | 20 mm heatsink included
-
TBCP1-200 -
TekBox Singapore Pte. Ltd.
The TBCP1-200 is a fixed aperture RF current monitoring probe.The probe has a 3dB bandwidth of approximately 200 MHz. The aperture of the RF current monitoring probe is 25 mm. Its transfer impedance is > 14 dB Ohm in the range from 40 kHz to 200 MHz.
-
Beha-Amprobe
Contents* AM-510-EUR (Digital multimeter)* ACD-10 PLUS (Digital current clamp)* TPP1-C1 (contact thermometer)* EU-200 (test lead set with 2 leads), 2 test prods (4 mm), 2 crocodile clips (CAT III/1000 V)* Hard carrying case
-
Knick Elektronische Messgeräte GmbH & Co. KG.
Transmitters for platinum temperature sensors and thermocouples in 6 mm housing with calibrated range selection. Functional safety up to SIL 2, SIL 3 redundant to parameterization via interface or intuitively, directly on the device. Universal use with 24 V DC or AC power supply.
-
CM600 -
General Technologies Corp.
Clamp opens up to 1 inch (25.4 mm). One rotary switch operation. Large 4 digit LCD display. AC/DC Voltage measurement up to 600 Volt. AC/DC current measurement up to 600 A.Relative measurement. One touch auto zero.
-
AX93274 -
Axiomtek Co., Ltd.
*PoE-PD I/O board complies with IEEE802.3at standard via an internal cable to power on SBC*100 x 32 mm*1 x LAN cable, 1 x power cable, 1 x thermal module*Compliant products: PICO831, PICO121, PICO841, PICO843
-
L12531 -
Hamamatsu Photonics K.K.
Sealed type microfocus x-ray source using the transmission target. Tube voltage : 40 to 110 kV, Maximum output : 16 W, Minimum resolution : 2 um, Short FOD : 1 mm, X-ray beam angle : 120 degree, Communication method : RS-232C.
-
CAMSIZER -
Retsch Technology GmbH
Dynamic Image Analysis (DIA) is a modern high-performance method for the characterization of particle size and particle shape of powders, granules and suspensions. Retsch Technology's optical analyzers CAMSIZER P4 and CAMSIZER X2 are based on this technology, covering a measuring range from 0.8 m to 30 mm.
-
KNM 2X / 5X series -
KAPP NILES Metrology GmbH
Analytical gear inspection machine for workpieces up to Ø 650 mm. Measuring machines for spur and helical gears, rotors, bevel gears, gear tools, shafts etc. Ultimate highly precise measurement of smaller size gears in the lab or on the shop floor - no foundation required.