Filter Results By:

Products

Applications

Manufacturers

Measurement

an acertained value.

See Also: Metrology, Instrumentation, Sensors, Meters, Stability


Showing results: 7276 - 7290 of 10608 items found.

  • Pressure Sensor Kit for Changing Ranges

    DP15TL - Validyne Engineering

    The wide range of diaphragms furnished eliminates expensive stocking of several transducers and offers the versatility of the differential type bi-directional transducer at a very low cost. The broad line pressure capability of this unit makes it useful in almost every laboratory application from flow to level measurement, vacuum to 3000 PSIG. The high output, when used with a carrier system such as the Model CD15 Sine Wave Carrier Demodulator or the CD12 Transducer Indicator, provides resolution equal to many secondary standard units.

  • Dual Channel Driver Card

    42460 - Pulse Instruments

    Two channels of 32 MHz clock drivers with up to 20 volt amplitude. The output voltage range is ±20 V, with independent high and low voltage settings. The inputs to the Card can be optically isolated. The card also contains voltage and current sense capability, which allows muxing of the current or voltage output measurements from all the Driver Channels in the system to a single DVM. The card allows independent programming of the rise and fall time of each channel one nanosecond increments.

  • Dual Channel Driver Card

    40461 - Pulse Instruments

    Two channels of 8 to 10 MHz drivers (25 V amplitude). The output voltage range is ±25V, with independent high and low voltage settings. The inputs to the Card are optically isolated. The card also contains voltage and current sense capability, which allows muxing of the current or voltage output measurements from all the Driver Channels in the system to a single DVM. The card allows independent programming of the rise and fall time of each channel as low as one nanosecond increments.

  • Analog Oscilloscope

    TOS-2100C - Twintex Electronics Co., Ltd

    ★ Dual channel 100MHz★ Time base auto-range★ Cursor readout with 7 measurements★ Panel lock function★ Buzzer alarm★ LED indicators★ TV synchronization; X-Y mode★ Z-axis modulation input; Trigger signal output★ Signal delay function, monitoring the leading edge★ Continuously adjustable screen illumination★ Delayed sweep ★ 10 sets memory for panel settings save & recall

  • NTA Particle Size Analyzers

    NanoSight Range - Malvern Panalytical Ltd

    The Malvern Panalytical NanoSight range of instruments utilizes Nanoparticle Tracking Analysis (NTA) to characterize nanoparticles from 10nm -2000nm* in solution. Each particle is individually but simultaneously analyzed by direct observation and measurement of diffusion events. This particle-by-particle methodology produces high resolution results for nanoparticle size distribution and concentration, while visual validation provides users with additional confidence in their data. Both particle size and concentration are measured, while a fluorescence mode provides differentiation of intrinsic or fluorescently labelled nanoparticles.

  • Automatically Differentiate Cyanobacteria

    FlowCam® Cyano - Fluid Imaging Technologies

    Based on proven FlowCam® technology, the new FlowCam Cyano automatically identifies cyanobacteria from other algae and particles in aquatic samples. Using a patent-pending combination of excitation wavelength, phycocyanin fluorescence measurement and image recognition software, the system automates what used to be done manually using microscopy. After differentiating the cyanobacteria form the other algae in the sample, VisualSpreadsheet and Advanced Classifier software can be used to further characterize the specific types of all algae found in the sample.

  • Portable Sucrose Brix Refractometer (0 to 32%) - for Measuring Concentration of Sugar in Fruit Juice and Industrial Fluids

    Extech RF10 - Extech Instruments Corporation

    The Extech RF10 0 to 32% Brix Refractometer measures the concentration of sugar in fruit juice and industrial fluids. Its compact size makes it easy to operate in small locations and it provides accurate and repeatable measurements on an easy to read scale. It requires only two or three drops of solution and comes with the prism and lens which has a simple focus adjustment. The Extech RF10 0 to 32% Brix Refractometer comes complete with a case, a calibration screwdriver, a plastic pipette and the calibration solution.

  • Test Data Management

    AmFax Ltd

    When testing your products, the measurement and test data produced is invaluable in helping your improve your product quality. Most companies do nothing with their test data apart from storing on a hard drive somewhere. Accessing it and using this data is the most valuable way of gaining insights into your manufacturing performance and enabling you to make immediate improvements to help increase product quality whilst reducing the likelihood of unwelcome field failures and expensive product recall events.

  • Harmonic Studies

    Electrical Testing Solutions

    Harmonic studies are performed to determine harmonic distortion levels and filtering requirements within a facility and to determine if harmonic voltages and currents are at acceptable levels. Field measurements and computer simulations are used to characterize adjustable-speed drives (ASDs) and other nonlinear loads and simulations are then performed to determine the filter specifications and effectiveness. The application of harmonic filters will significantly alter the frequency response of the power system. An evaluation of the harmonic voltage and current limits, (e.g., IEEE Std. 519) is completed to determine the effectiveness of the proposed filter installation.

  • Full Range / High Resolution Field Portable NIRSpectroradiometers For Remote Sensing

    Spectral Evolution Inc.

    SPECTRAL EVOLUTION is a leading manufacturer of field-portable and laboratory NIR spectroradiometers and spectrometers for remote sensing applications including geological remote sensing, ground-truthing, spectral remote sensing, environmental and climate research, crop and soil research, vegetative studies, forestry and canopy studies, radiometric calibration transfer, upwelling and downwelling measurement and more. Our NIR spectrometers and spectroradiometers provide the best combination of high resolution and high sensitivity resulting in the most precise field portable instruments available on the market.

  • Tilt Position Sensors

    Positek Limited

    Available with any measurement angle between 15 and 160 the P603 tilt sensor operates a gravity driven, oil damped pendulum with a very low settle time and durable housing. Our tilt sensor has proved popular in marine applications because like our linear and rotary sensors we have used highly durable and corrosion resistant materials.We also offer the S623 which is waterproof sealed for continual submersion to IP68 350bar, 5000psi, 3500msw

  • Handheld OTDR

    Exfiber Optical Technologies Limited

    EX3210 Handheld OTDR Features:♦ One-key operation♦ Shortcut key design, one- key setup♦ Smart portable OTDR, 4¡ TFT LCD display♦ Firm, durable, shock-proof, moisture-proof♦ Large storage capacity, maximum store up to 800 measurement files♦ Built-in lithium rechargeable battery, more than 10 hours working hours♦ Support USB and network interface, more convenient to manage files

  • Modular Solution for RF Switch & Control Tasks

    OSP - Rohde & Schwarz GmbH & Co. KG

    The R&S®OSP comes in two compact 2 HU models (R&S®OSP220, R&S®OSP230) and one large 3 HU model (R&S®OSP320) to meet diverse test scenario requirements – ranging from desktop configurations for laboratory measurements to complex, rack-integrated test systems. The R&S®OSP230 model comes with a manual control touchscreen. The R&S®OSP320 model has a monitor option.

  • FT-NIR for Process Analytics

    QuasIR™ 2000E - Galaxy Scientific, Inc.

    Galaxy Scientific’s QuasIR™ 2000E is designed for continuous measurement of the chemical composition of material transported on a conveyor belt, through a pipe, or in a chute. Our unique external projection optics use high powered tungsten lamps to illuminate the sample from as far as 24 inches away and collect the scattered reflection off the sample through a fiber optic cable. The analysis spot size can be set as small as 0.5″ or as large as 8″ in diameter and can be custom tailored to applications needs.

  • Cable Locator

    CL 20 - BAUR Prüf- und Messtechnik GmbH

    Cable fault location with the BAUR CL 20. The CL 20 cable locator comprising a transmitter and a receiver is used to determine the exact location of cables and metal pipes. The ability to determine laying depths of up to 4.5 m and to measure signal currents at the touch of a button allows you to obtain reliable information on the position of the cable within the shortest time.* Fast and exact location of position and laying depth of cables* Intuitive operation – no special measurement knowledge required* Lightweight and manageable

Get Help