Filter Results By:

Products

Applications

Manufacturers

Meters

sense, display, measures; gas, water, electricity, particles, vibration, light or quanta.

See Also: Sensors, Measurement


Showing recent results 2281 - 2295 of 4375 products found.

  • Double Voltage Double Frequency meter

    DVDF - UMA Electronics Enterprises

    Double Voltage Double Frequency meter, ideal for DVDF test sets. Uses 24 bit ADC to measure voltage. Accuracy Class 0.2 Box Size - 96mm by 96mm ( Depth 65mm ). Voltage range: 30.0 V to 1000.0 V Frequency Range: 30.0 to 200.0 Hz Two rows four digit seven segment Display Simple and easy to operate user interface. Relay Facility with Timer ( Optional). Computer Interfacing Facility ( Optional).

  • Automatic Transformer Turns Ratio Meter

    VTRM - Veer Electronics

    VEER make Automatic Transformer Turn Ratio Meter - VTRM measures no-load Turn Ratio of transformer means Ratio of High Voltage Winding to Low Voltage Winding of Transformer. You can read Turns Ratio directly from front LCD display. It also measures and display % Deviation, Excitation Current. VTRM has inbuilt Data Storage Memory to store 200 Test Results. It can transfer all test results to Computer using dedicated Software.

  • Audio Meter and Side Chaining Tool

    Digital Peak Meter Pro - Blue Cat Audio

    The metering capabilities of the DPMP plug-in let you control and monitor your audio signal exactly the way you want: almost every aspect of the meters can be customized. It now proposes five different scales, including Bob Katz's very popular K-System scales (K-12, K-14, K-16 and also the extra K-10). The graphs show the evolution of the audio envelopes over time, and the mid-side switch lets you verify mono compatibility problems and check the "stereoness" of your audio sources very easily.

  • 100Hz/120Hz/1kHz Handheld LCR Meter

    U1731C - Keysight Technologies

    Now you can measure at frequencies as high as 100 kHz, a capability that is typically found only in benchtop meters. With the auto identification, Ai which conveniently displays component type and detailed component analysis such as Z, ESR, DCR, you can get measurements done faster. Better yet, the battery lasts up to 16 hours, ideal for testing on the go. With the U1730 Series, you can perform quick, basic LCR measurements at your convenience, without burning a hole in your pocket.

  • 100V MEGOHMMETER Surface Resistivity Meter

    B8562 - Botron Inc.

    Portable 100 volt LED megohm tester with two parellel probes and two banana jacks for optional 5lbs weights. a 10 light Surface Resistivity Meter that test at 100 volts. This portable test instrument provides both RTT (resistance top to top) and RTG (resistance top to ground) will measure a wide variety of static dissipative and conductive materials.

  • OVERALL ACOUSTIC LEVEL METER (OVA)

    OROS sa

    With an OROS 3-Series you get a multi-channel analyzer, so, why not turn your unit into a true multi-channel sound level meter. The OVA plug-in extends the analyzer capabilities to a comprehensive acoustic measurement system. The OVA complies with the latest standards such as IEC 60-672. It runs 3 RMS and a peak detector on each input. The detectors feature time filtering and weighting.

  • Pen Type Oxidation-Reduction Potenial Meter

    Bestone Industrial Ltd.

    Pen type ORP (oxidation reduction potential) meter is set pH measurement and control and redox measurement and control in one multi-function intelligent instrument. Simultaneously displayed ORP value and temperature. Its full function, stable performance, easy to operate and so on. Making it the best choice for enterprises wild and laboratory testing and control ORP value. The ORP value monitoring is widely used in the chemical, pharmaceutical, electronics, food and other industries

  • Six Digit Ampere Hour Meter

    IM2506 - Ajinkya Electronic Systems

    IM2506 model which provides 6 digit display as compare to IM2501 Ampere Hour Meter which has 4 digit display. This model can be used with any circuit as the shunt value can be programmed by the user. The equipment is provided with one relay output to alert the user when the sufficient charge has been delivered. It is also used to directly cut off the rectifier.

  • Metal Tube Float Flow meter

    F56 - Beijing Airport Beiguang Instruments Co., Ltd

    F56 Metal Tube Float Flow meter Series are used for measure instantaneous and accumulated flow rate of liquid, gas and steam in closed pipelines. It is suitable for metering flow value on site or electronic remote. The measuring principle is based on the hydrodynamic effects,This makes float moving from bottom to top in vertical Pipe. As the displacement of float is in related to flow rate, which can be read from the indicator by means of the magnetic drive system in non-contact form . Also, flowmeters output electrical signal (4-20)mA / hart communication protocol with high / low limit Warning switches/integrating flow PCB broad can be configured.

  • Single Phase Reference Standard Meter

    Guangzhou GENY Electric Co.,

    ingle Phase Electronic Energy Standard Meter Model ID: SZ-01A-K3E Features: High class accuracy up to 0.02% Wide testing range, 5V...480V in voltage, 1mA...120A in current Testing mode includes active powe, reactive power, cross connected reactive power Harmonic analysis.

  • Three Phase Reference Standard Meter

    Guangzhou GENY Electric Co.,

    Three phase Stationary Reference Standard Model: QME4103 ◇ Description GENY's reference standard adopt unique sampling technology, with high accuracy, wide testing range. It is suit for electric power departments, electric energy meter manufacturers, measuring and quality.

  • Analog TV Signal Level Meter

    HT828B - Hangzhou Softel Optic Co., Ltd.

    The signal level meter, SE828C is able to measure EQ, C/N, V/A and trunk volt in the CATV analog system, the number keys is designed to direct input frequency so that work would be easier. It can measure 2 channels at the same time.

  • Class 2 Sound Level Meter

    SP79 - Martindale Electric Co. Ltd

    The SP79 is a Class 2 sound level meter for on-site measurements in accordance with Noise at Work legislation in industrial and office environments. Featuring A and C frequency weighting and fast and slow time weighting, the compact design can be handheld, or mounted on a tripod for longer term monitoring of Min / Max values. Detailed recording and analysis can be made using the AC and DC outputs. The SP79 complies with BS EN 61672-1:2003 and is supplied with a detachable windshield and hard carry case. The large high contrast display includes both digital reading and analogue bar graph. An optional Class 2 sound level calibrator is available to verify accuracy before and after readings in accordance with international standards. The SPC70 is simple to use and provides a 1kHz reference at 94dB and 114dB.

  • Electrometer/High Resistance Meter, 0.01fA, Battery

    B2987A - Keysight Technologies

    The B2987A Electrometer/High Resistance Meter is the world's only graphical electrometer that allows you to confidently measure small currents with 0.01 fA (0.01 x 10-15 A) resolution and large resistances of up to 10 P (10 x 1015 ). In addition, battery operation eliminates AC line noise from your critical measurements. It possesses a 4.3" color LCD with a graphical user interface that provides trend chart and histogram data in addition to numeric information. These front-panel capabilities enable you to capture transient behavior and to perform quick statistical analyses without a PC. The available Setup Integrity Checker software option allows you to compare the noise levels of different cabling and fixturing arrangements to help isolate external noise sources.

  • Automatic Transformer Turns Ratio Meter

    ATRI-3 - UMA Electronics Enterprises

    Range: 3.00 to 200.0 Accuracy : class 0.1 Ideal for tranformer and motor winding ratio measurement Auxilliary Power: 230V +/- 20% Measures and displays Transformer Turns Ratio by using voltage ratio method. Applying Test Voltage to the Low Voltage winding of a transformer and accurately measures the resulting voltage from the High Voltage winding. As per ANSI/IEEE C57.12.90 Standard Accessories: 10 meter long wire for three phase connection on LT and HT sides. Dimension: 131(H) by 280(W) by 230(depth) Excitation : 1.8V , 150.0Hz, sine wave. Max.500mA Fully Automated measurement of Turns Ratio, Excitation current, LT voltage, HT Voltage and polarity Three Phase Connection enables faster testing Test voltage is applied by 'PUSH to ON' switch, thus allowing safety of personnel during connection/disconnection (Optional) Data can be saved in memory card