Filter Results By:

Products

Applications

Manufacturers

Meters

sense and display measures of gas, water, electricity, particles, vibration or light.


Showing results 3211 - 3225 of 4309 products found.

  • Ultrasonic Flowsensor

    ULTRAFLOW U1000 - Georg Fischer Signet

    The U1000 is an ultrasonic permanent/fixed clamp-on flow metering solution for measuring flow rate. The cost effective device can either be used as a stand alone meter or as an integral part of a control loop.

  • Wireless Interface

    Quasar 7Z01300 - Ophir Photonics

    The Quasar module provides a way to use Ophir sensors as a remote laser power/energy meter allowing optimum placement of the sensor and separate optimum placement of your PC or laptop with no connecting cables.

  • Wireless Load Cell Readout And Data Acquisition

    WTS - Interface Inc.

    Continuous 5VDC power from USB200 meter rangeIP65 Nema 4 Enclosure (WTS-BS-4)USB output to PCConnection from up to any number of Transmitters.USB Data Logging Software Provided

  • Motorized dynamic torque bench

    TORKHEADRIVER - Com-Ten Industries

    The TorkHeaDriver is a motorized torsion tester that is equipped with a rotary torque sensor allowing torque and angle measurements on complete system. This torsion meter is particularly well suited for measurements on knobs, valves, faders… installed on sets.

  • Leakage Detectors

    CoberMuegge LLC

    MDRM microwave leakage monitor is designed as a fixed location leakage detector. Mounted 1-2 meters from your equipment, it will detect excessive emissions and trigger an alarm or shut down the system in the event of high emissions.

  • Rebar Locator

    Profometer PM-630 AI - PASI srl

    The Profometer PM-630 AI advanced cover meter is a sophisticated instrument extending the application range of the Profometer PM-600 with the Line and Area Scan Modes and an extensive choice of statistical views.

  • Temporary Power Restoration

    Aqua-Tronics

    This new Modular System from Aqua-Tronics, Inc. drastically changes the way you temporarily provide service to your customer. Unlike the awkward, heavy and sometimes dangerous units currently available on the market, Aqua-Tronics has broken the system down into smaller pieces that can easily be picked up and moved by one person. This provides maximum flexibility to the user while restoring power to the customer instantly. The system master unit has a meter socket (buddy base) attached where the lineman simply parks the faulted leg of the service. By plugging in the meter base and replacing the meter, service is restored to the customer, allowing the faulted cable to be repaired at a later time. This system is capable of providing 7.5 to 22.5KVA service depending on the number of booster units attached.

  • Electrical Calibration

    GF6018A - Beijing GFUVE Electronics Co.,Ltd.

    The equipment is compliance with national verification regulation: JJG1242005 "Ammeter, voltmeter, power meter and resistance meter verification rules" and related national standards. 0.05 single-phase AC/DC standard source, can verify magnitude 0.2 and the following AC/DC voltmeter, ammeter, frequency meter, resistance meter. The source signals by using DSP and 16-bit high-speed analog-to-digital converters of controllable sine wave, the distorted wave signal source.The equipment comes with RS-232 interface, can be connected with PC to a semi-automatic verification system. It has precise interface and multi-functions including verification, storage and query.The equipment adopts color LCD screen, chart character display is clear, with high precision, stable and reliable, convenient operation and flexible characteristics.

  • Field Power Sensors

    Bird Technologies

    Bird offers a comprehensive range of field sensors, meters and monitors, all easy-to-use solutions for users of all skill levels. The Field Sensors range from the economical, element based Directional Power Sensor to the multi-functional Wideband Power Sensor capable of measuring a broad range of critical metrics for modern telecommunication systems. The 5000-XT is a rugged, handheld meter capable of interfacing with all Bird Field Sensors and includes advanced features such as multiple languages and data logging. The Monitor family includes a range of products that not only measure power and VSWR but also provide hard contact alarms to protect your system in the event of a system failure the IP-enabled, BPME is even capable of emailing a failure notification.

  • DC Gaussmeter

    GM1-HS - Alpha Lab, Inc.

    The Model GM1-HS measures the strength and polarity of magnetic fields up to 799.99 gauss. The thin sensor is at the end of a 100 cm flexible cable. The sensor tip is also flexible and can be bent for a variety of situations. The sensor can be held against the surface of a steel part to check for residual magnetism, or it can be bent into an "L" shape to measure inside a DC Solenoid. This meter has a resolution of .01 gauss (1/50 of the Earth's typical field) which is finer resolution than the Model GM1-ST. It is also used to map fields from large magnets (If fields are over 800 gauss, use the Model GM1-ST). The meter has immediate turn-on and updates 4 times a second. There is no setup required, making this the fastest gaussmeter available.

  • Industrial Nodes

    B+B SmartWorx

    The Wzzard IP-67 rated Intelligent Industrial Edge Nodes accommodate virtually any industry-standard external sensors. The Nodes can collect data from up to 3 external sensors from a wide variety of interface options, including general purpose analog inputs, digital inputs/outputs and thermocouples. Nodes can also contain internal sensors like an accelerometer and temperature and can integrate other application specific sensors upon request. Wzzard Intelligent Edge Nodes will physically connect, via conduit fitting, cable gland or an M12 connector. Nodes are available with an integrated or longer range external antenna, allowing for connectivity distance of up to 500 meters outdoors and 200 meters indoors.

  • Human Vibration Monitor

    HVM2300 - Larson Davis, Inc.

    The HVM200 is a small rugged vibration meter with built in Wi-Fi that can be used to measure hand-arm, whole body and general vibration. It includes the metrics and frequency weightings needed to measure human vibration. This 3 channel meter meets the requirements of ISO 8041:2005 and it is designed to measure per ISO 2631-1, 2 & 5 and ISO 5349 in support of the American Conference of Governmental Industrial Hygienists (ACGIH) Threshold Limit Values (TLVs) and the directive 2002/44/EC. This makes the HVM200 an ideal choice for an instrument used to demonstrate compliance with human vibration requirements and regulations worldwide.

  • Dummy Load

    RKR Designs LLC

    Dummy load is capable of dissipating four times the legal limit 6 kW for 2 minutes and legal limit 1500 watts key down, forever. It covers the 160 meter to 6 meter bands (actually 1 Mhz-60 MHz continuously). It is a dry dummy load intended for testing amplifiers and station conditions. Two fans on the rear of the unit are automatically turned on when the internal temperature reaches 120°F/49°C . The unit runs off a universal AC supply. Simple to operate and use, the dummy load includes an RF sample output of -60 dBc.

  • Audio Monitoring

    Mini-Mon3 - Murraypro Electronics

    “Touch Latch” selection between 4 input Groups provides Flyaway, Mobile Kit, Edit Suites and CARs with comprehensive and cost effective monitoring facilities. The miniature "Type 19" meter movements that are fitted in this 1 U Unit boast a surprisingly large 42 x 20 mm scale which enables practical viewing at distances in excess of 2. The Movements have a very slightly relaxed specification which closely emulate the full-sized BS 6840 meters, which have now been withdrawn by their Torquay manufacturer. Note that Murraypro’s COMPACT PPM range continues to offer ‘full sized’ PPM metering.

  • PCIe-To-PCI Expansion System

    PCES-8581-13S - ADLINK Technology Inc.

    Harnessing the bandwidth potential of the PCI Express, the latest smart expansion system enables computers with a PCI Express slot to remotely manage and control up to 13 PCI devices seven meters away, using the high-speed PCI Express interface. The expansion system operates in 32-bit/33 MHz configuration and come with complete end-toend hardware and software transparency for the host system. Hardware devices installed in the expansion system behave and work as if these are directly installed into the host system, requiring no additional drivers or software installation. The host system may be separated from the expansion system at up to seven meters using high-quality shielded twisted copper cables.